Berenson Advantage Plus Five Series 3" (76 mm) Center to Center Brushed Nickel Cup Pull, - 9387-1BPN-P

Berenson Advantage Plus Five Cup Pull For Cabinets

Berenson Advantage Plus Five cup pull is a zinc die cast cabinet handle designed for a 3 inch center to center mounting layout, so it lines up with common drilled drawer or door hole patterns in many cabinet runs. The brushed nickel finish gives the cup pull a muted metallic look that supports projects calling for this finish tone across visible hardware. The pull body has a total length of 3-1/2 inches, which keeps it compact along the drawer front while still spanning the 3 inch mounting centers in a balanced way. A projection of 1 inch sets the grip standoff from the surface, so fingers have room to reach behind the cup lip during daily use. The 1-11/16 inch width defines how much vertical face this pull occupies, which matters when arranging it on narrower rails or smaller drawer faces.

Key Cup Pull Details That Support Cabinet Work

• The zinc die cast material defines the base structure of the cup pull, giving it a consistent formed shape that supports repeated use on cabinet doors or drawers across a project.
• The brushed nickel finish provides a specific surface appearance, which helps align this pull with other brushed nickel decorative hardware on the same installation for a coordinated look.
• The 3 inch center to center dimension sets the mounting hole spacing, allowing this pull to match layouts drilled for 3 inch handles during new cabinet builds or hardware changeouts.
• The overall 3-1/2 inch length controls how much horizontal space the pull covers, which matters when placing it near panel edges or between adjacent cabinet fronts.
• The 1 inch projection controls how far the grip stands off the surface, providing clearance for fingers while keeping the pull closer to the face when a lower profile is desired.
• The 1-11/16 inch width defines the vertical footprint, helping with positioning on rails or smaller fronts where available height is limited.
• The specified screw size of 8-32 x 1 inch sets the thread and length for mounting through standard cabinet fronts of typical thickness.

Cabinet Cup Pull Dimensions For Mounting Layout

This Berenson Advantage Plus Five series cup pull uses a 3 inch center to center spacing, so mounting holes are set 3 inches apart on the cabinet surface to align with the pull posts. The overall 3-1/2 inch length means the pull extends slightly beyond the hole spacing at each end, which affects how close it can sit to cabinet edges or neighboring hardware. A projection of 1 inch positions the pull off the face far enough for hand clearance while keeping it relatively close to the surface. The 1-11/16 inch width determines how much rail height is occupied, which is useful when planning layouts on narrow drawer fronts or door frames that share space with other hardware elements.

Using This Brushed Nickel Cup Pull In Projects

Where This Zinc Die Cast Cup Pull Fits Best

This Berenson Advantage Plus Five cup pull belongs to the Handles and Pulls category within decorative hardware and moldings, so it is suited to cabinet and furniture applications where a handle-style pull is needed. The brushed nickel finish ties it to projects that already specify brushed nickel visible hardware, helping maintain finish consistency on doors and drawers. With a center to center of 3 inches, this pull aligns with cabinet layouts drilled for that common spacing, which is useful during new construction or when swapping existing pulls that share the same measurement. The 3-1/2 inch length, paired with the 1-11/16 inch width, makes this pull appropriate for many standard drawer faces, because it provides a defined grip area without dominating the front.

Why These Advantage Plus Dimensions Support Repeatable Results

The 3 inch center to center dimension lets installers rely on a known, repeatable drilling pattern, which helps when setting up jigs or templates for multiple cabinet fronts. The specified 8-32 x 1 inch screw size indicates the thread and reach through typical cabinet materials, allowing consistent bite into the pull posts at this thickness range. The 1 inch projection gives a predictable standoff distance from the cabinet face, so pulls across a room present a uniform profile. The 3-1/2 inch overall length and 1-11/16 inch width create fixed references for spacing relative to panel edges, aiding in layout symmetry from cabinet to cabinet. Being part of the Advantage Plus collection, with a defined Manufacturer Part # 9387-1BPN-P, also supports repeat ordering for future phases that need the same look and dimensions.

Common Questions About This Berenson Cup Pull

Select This Cup Pull For Brushed Nickel Cabinet Runs

The Berenson Advantage Plus Five series 3 inch center to center brushed nickel cup pull combines a zinc die cast body, 3-1/2 inch length, and 1 inch projection to support consistent cabinet layouts. For projects calling for brushed nickel handles using a 3 inch pattern, this pull provides a defined size and finish match ready for repeated use.