Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 hinge is a concealed cabinet hinge engineered for face frame construction, so doors close cleanly while hardware stays hidden. This TEC 864 self-close 7/16 overlay face frame hinge provides a 7/16 inch overlay, which sets a consistent reveal line across a run of cabinets. The Grass face frame TEC 864 Series hinge line is made in the USA and is engineered to exceed industry standards for load rating, opening and closing cycles, supporting long-term use in busy kitchens or shops. All TEC 864 hinges feature a solid metal cup, which creates a stable seating in the door for repeatable boring and mounting. All moving mechanism parts have all-steel construction, giving the hinge a robust action through thousands of open-close cycles. As a concealed cabinet hinge, it keeps the face frame uncluttered while delivering positive self-closing on the door.
864 wraparound face frame hinge uses a wraparound mount style that positions on 3/4 inch thick face frames, so the hinge references directly off the frame edge for alignment. The 7/16 inch overlay configuration sets how far the door covers the face frame, which helps coordinate overlay across adjoining doors and pairs. Available boring patterns of 42 mm and 45 mm allow the TEC 864 hinge to match common drilling jigs and line boring setups, reducing layout time. Available in doweled cabinet door cup fastening design, this hinge uses pre-bored dowel holes in the door to locate the cup, which speeds assembly and keeps the cup square to the door edge.
This concealed cabinet hinge belongs to the Grass TEC 864 Series hinge line, placing it in a family designed around face frame cabinetry. As a Grass face frame hinge, it is intended for use on 3/4 inch thick face frames, fitting the standard dimension used in many kitchen and bath cabinet runs. The 7/16 inch overlay face frame hinge design lets the door overlap the frame by 7/16 inch, setting a predictable door position that simplifies planning gaps between doors and drawer fronts. The 108 degree cabinet hinge opening angle gives ample swing to reach inside the cabinet while keeping the door from over-rotating into adjacent walls, appliances, or cabinets. TEC 864 hinges are designed to work with doors up to 3/4 inch thick, so typical solid wood and panel doors fall within the working range without special thickness changes. The concealed hinge layout, combined with the shallow 10.5 mm cup, allows many profiled door edges to be used while still maintaining a consistent bore depth.
The 108 degree hinge has three dimensional adjustment, so door alignment can be fine-tuned after mounting without redrilling. Cam side adjustment of plus or minus 1.5 mm shifts the door sideways, which helps dial in even reveals between doors and along face frames. Cam depth adjustment, providing 2.5 mm out and 0.5 mm in, moves the door closer to or farther from the cabinet, which is useful when aligning doors to adjacent panels or correcting for minor frame variations. Slotted screw hole height adjustment of plus or minus 2 mm lets the door move up or down, helping match rail lines and keep door tops and bottoms flush. All moving mechanism parts have all-steel construction, giving the adjustment cams and pivot points a solid feel during setup. All TEC 864 hinges feature a solid metal cup, which helps hold adjustment settings because the cup remains firmly seated in the door. Available boring patterns of 42 mm and 45 mm make it easier to use standard drilling equipment across multiple cabinet projects without changing templates.
The TEC 864 self-close 7/16 overlay face frame hinge is intended for face frame cabinets, so it matches projects that use 3/4 inch thick face frames.
The 108 degree TEC 864 hinge opens to about 108 degrees, which offers wide access into the cabinet while keeping the swing controlled.
The 108 degree TEC 864 hinges are designed to work with doors up to 3/4 inch thick, aligning with common cabinet door materials.
The 7/16 inch overlay sets how much the door covers the face frame, which helps establish consistent reveals from cabinet to cabinet.
TEC 864 hinges offer side mount and wraparound mount options, so the installer can match the hinge style to the cabinet frame design.
The 108 degree hinge provides side, depth, and height adjustment, allowing fine-tuning of reveals and alignment without changing the bore or frame.
This Grass TEC 864 hinge combines concealed mounting, 7/16 inch overlay, and 108 degree opening for face frame cabinets using 3/4 inch thick frames and doors up to 3/4 inch thick. The wraparound face frame hinge option, three dimensional adjustment, and shallow 10.5 mm cup give flexibility when working with profiled doors and tight layout tolerances. For cabinet runs that need consistent reveals, a concealed look, and repeatable boring patterns of 42 mm or 45 mm, this TEC 864 self-close hinge offers the critical dimensions and adjustments needed to get doors aligned and operating smoothly.
Sold In: 1 Each
