Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinge is a concealed cabinet hinge that creates a clean exterior while providing controlled self-closing action, which helps doors return to position consistently on repeated use. This TEC 864 hinge is part of the TEC 864 Series hinge line made in the USA, so it supports projects where domestic manufacturing is preferred on commercial or residential jobs. The hinge is a self-close 1/4 inch overlay design for face-frame cabinets, so door and frame layouts can follow common 1/4 inch overlay standards. As a concealed cabinet hinge, it keeps hardware hidden from view, which helps finished cabinetry present a more uniform appearance in kitchens, baths, or casework. The hinge is finished in nickel, aligning with other nickel-plated components on the job, which can simplify hardware coordination at the cabinet interior.
TEC 864 hinges have two cabinet mounting options, side mount and wraparound mount, so installers can match the hinge base style to existing cabinet construction or preferred installation method. The wraparound mount style mounts on 3/4 inch thick face frames by positively locating the hinge base on the face frame, which helps position the hinge accurately during installation. This 108 degree hinge provides three-dimensional adjustment using a cam side adjustment of plus or minus 1.5 mm, which lets the door be shifted sideways to fine-tune reveals between doors. It also uses cam depth adjustment of 2.5 mm out and 0.5 mm in, allowing the door to move in or out relative to the face frame for better alignment at the front. A slotted screw hole height adjustment of plus or minus 2 mm lets the door move up or down, which helps line up door tops and bottoms across a run of cabinets.
The Grass TEC 864 face frame hinge is classified as a concealed cabinet hinge in the concealed face frame hinge category, so it is suited to face-frame cabinet construction where visible surface hinges are not desired. Its 1/4 inch overlay configuration works with door layouts that overlap the face frame by 1/4 inch, which is common on many kitchen and bath face-frame cabinets. The wraparound mount style is designed to mount on 3/4 inch thick face frames, providing a fixed reference on typical face-frame stock for consistent placement from cabinet to cabinet. As part of the TEC 864 Series, this hinge line is engineered to exceed industry standards for opening and closing cycles, which supports cabinets in frequent-use areas such as kitchens, offices, or institutional spaces. The 108 degree opening angle gives doors a wide swing, which eases access to interior storage and helps reduce interference when working in front of open cabinets.
The solid metal cup on every TEC 864 hinge provides a rigid connection at the door boring, which helps keep the door seated consistently even when doors are opened and closed many times. All moving mechanism parts use all-steel construction, so the hinge pivot and self-close components operate on stable, metal-to-metal interfaces that support consistent motion. The shallow 10.5 mm cup depth is designed to accommodate most profiled door edges, allowing boring operations on doors with decorative routing while retaining sufficient material behind the cup. Boring patterns available at 42 mm and 45 mm work with common line-boring and drilling jigs, which supports repeatable hinge placement in both production shops and serious home shops. Doweled cabinet door cup fastening is an available design that fits workflows using dowel-based hinge insertion equipment, which can speed installation steps in higher volume cabinet runs. The 1/4 inch overlay face-frame design aligns door positioning with established overlay layouts, which simplifies planning for adjacent doors and end panels on a multi-cabinet installation. Self-closing operation brings the door closed at the end of travel, aiding consistent final position of the door against the face frame on everyday use. Three-dimensional adjustment built into the 108 degree hinge lets installers fine-tune side, depth, and height without rehanging the door, which reduces rework when dialing in even reveals and flush fits across a wall of cabinets.
The Grass TEC 864 face frame hinge is classified as a concealed face frame hinge, so it is intended for face-frame cabinet construction where hidden hinges are preferred.
This TEC 864 hinge is specified as a 1/4 inch overlay design, so the cabinet door is positioned to overlap the face frame by 1/4 inch when installed.
The 108 degree TEC 864 hinge is designed to work with doors up to 3/4 inch thick, so standard cabinet door thickness can be used without binding at the hinge.
The TEC 864 wraparound mount style mounts on 3/4 inch thick face frames by positively locating the hinge base on the face frame for accurate positioning.
This 108 degree hinge provides cam side adjustment of plus or minus 1.5 mm, cam depth adjustment of 2.5 mm out and 0.5 mm in, and slotted screw height adjustment of plus or minus 2 mm.
TEC hinges use a shallow 10.5 mm cup depth and available boring patterns of 42 mm and 45 mm, matching common cabinet door boring setups.
The Grass TEC 864 self-close 1/4 inch overlay face frame hinge in nickel combines concealed cabinet hinge construction with a 108 degree opening angle, which supports everyday access while keeping hardware out of sight. Its wraparound mount style for 3/4 inch thick face frames, three-dimensional adjustment ranges, and shallow 10.5 mm cup help align cabinet doors cleanly when working with standard face-frame materials and profiled doors. Engineered to exceed industry standards for load rating and opening and closing cycles, this TEC 864 Series hinge suits projects where long-term door operation and accurate alignment are priorities.
Sold In: 1 Each
