Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 self-close hinge is a concealed cabinet hinge for face-frame construction that controls the door within the 108 degree opening range, which helps doors return to a consistent closed position on everyday kitchen or shop cabinets. This hinge is part of the Grass face frame TEC 864 Series hinge line, so it fits into a proven family of products for face-frame cabinetry where a uniform hardware standard simplifies layouts. As a self-close hinge within the TEC 864 Series, it is engineered to exceed industry standards for load rating and opening and closing cycles, which supports long-term door alignment in high-use residential or commercial installations. The hinge belongs to the concealed face frame hinge category, so it keeps hardware out of sight while still providing the functional clearances needed around adjacent cabinets and finished trim.
This TEC 864 1/4 inch overlay face-frame hinge is designed so the door overlays the face frame by 1/4 inch, which helps define door reveal and spacing when planning a run of cabinets. The wraparound mount style is designed to mount on 3/4 inch thick face frames by positively locating the hinge base on the face frame, which helps position the hinge without complex jigs. TEC 864 hinges also offer a side-mount option in the same series, so installers can match the mounting style to different cabinet constructions while keeping the same basic hinge geometry across the job.
The Grass face frame TEC 864 Series hinge line is made in the USA and is intended for face-frame cabinetry, which suits many kitchen, bath, and built-in projects using 3/4 inch face frames. This particular TEC 864 self-close 1/4 inch overlay hinge is designed so the door overlays the face frame by 1/4 inch, giving predictable reveals when pairing multiple doors on a shared frame. The 108 degree TEC 864 hinge is designed to work with doors up to 3/4 inch thick, so it matches common cabinet door stock used in many shops and job sites. TEC hinges have a shallow 10.5 mm, or 13/32 inch, cup, which helps accommodate most profiled door edges without cutting too deep into the panel. Available boring patterns of 42 mm and 45 mm mean the hinge can align with standard European-style drilling layouts on the door, which supports CNC or line-boring workflows.
The 108 degree TEC 864 hinge provides three dimensional adjustment, which gives on-site control over final door position. The cam side adjustment of plus or minus 1.5 mm lets the installer shift the door sideways on the frame, which helps dial in reveals between adjacent doors or trim. A cam depth adjustment with 2.5 mm out and 0.5 mm in travel allows the door to move closer to or farther from the cabinet, which compensates for slight drilling or door-thickness variations and helps the door close cleanly to the face frame. A slotted screw-hole height adjustment of plus or minus 2 mm changes vertical door position on the cabinet, which supports fine-tuning gaps at the top and bottom edges. TEC 864 hinges are available in two cabinet door cup fastening designs, screw-on and doweled, which lets production shops match the hinge to either screw-fastened or dowel-pressed processes. This hinge uses number 6 x 5/8 inch flat head fasteners for the hinge cup and number 8 x 3/4 inch pan head fasteners, so drill sizes and driver bits can be set up around familiar screw formats on the bench or at installation.
The Grass TEC 864 self-close hinge is a concealed face-frame hinge designed for 3/4 inch thick face frames, which matches many kitchen, bath, and built-in cabinet constructions.
The TEC 864 1/4 inch overlay hinge positions the door to overlay the face frame by 1/4 inch, which sets consistent reveals and clearances across a run of cabinets.
The 108 degree TEC 864 hinge is designed to work with doors up to 3/4 inch thick, aligning with common cabinet door stock in many woodworking shops.
The TEC 864 hinge has a shallow 10.5 mm, or 13/32 inch, cup depth, which reduces material removal and works well with profiled door edges during boring.
The TEC 864 hinge is offered with 42 mm and 45 mm boring patterns, which align with common European-style drilling setups used in cabinet production.
The TEC 864 hinge provides cam side adjustment, cam depth adjustment, and slotted screw-hole height adjustment, which together help fine-tune door position in three dimensions.
The Grass TEC 864 self-close hinge with 1/4 inch overlay, wraparound mounting for 3/4 inch face frames, and 108 degree opening angle offers a concealed solution for many standard cabinets. With three dimensional adjustment, shallow 10.5 mm cup depth, and drilling patterns of 42 mm and 45 mm, it fits smoothly into door production and on-site alignment. For projects built around face-frame construction and doors up to 3/4 inch thick, this TEC 864 hinge gives a consistent hardware platform to plan around.
Sold In: 1 Each
