Berenson Contemporary Advantage Four Series 3-3/4" (96 mm) Center to Center Brushed Nickel Pull, - 9395-1BPN-P
Description
Berenson Contemporary Advantage Four Pull For Cabinets
Berenson Contemporary Advantage Four pull is a zinc cabinet handle in the Advantage Plus 7 collection with a brushed nickel finish, so it delivers a contemporary look that matches other brushed nickel hardware in the same design family. The 3-3/4 inch (96 mm) center to center drilling sets your hole spacing, which matters when laying out new fronts or matching to existing 96 mm boring on replacement jobs. The overall 4-1/16 inch length keeps the pull visually balanced on typical cabinet doors and drawers, helping layouts stay consistent across a run. A 1 inch projection establishes how far the pull stands off the front, giving fingers clear room to grab without sticking out excessively into walkways. The 1/2 inch width provides a comfortable gripping surface while keeping the profile lean for modern installations.
Key Berenson Brushed Nickel Cabinet Pull Details
- The zinc material defines the pull body, giving a solid metal feel that suits everyday cabinet and drawer use in kitchens, baths, and shop casework.
- The brushed nickel finish sets the surface tone, tying in with brushed nickel hinges, faucets, and lighting for a unified appearance across the project.
- The 3-3/4 inch (96 mm) center to center dimension controls drilling layout, allowing consistent spacing on both new cabinet faces and replacements drilled for 96 mm pulls.
- The 4-1/16 inch overall length sets the visual footprint on each front, which helps installers line up multiple pulls so sightlines stay straight and proportional.
- The 1 inch projection determines stand-off from the surface, creating a defined hand clearance that supports easy gripping on doors and drawer fronts.
- The 1/2 inch width defines the front-to-back grip area, offering enough contact for fingers while maintaining a clean, contemporary narrow profile.
Mounting Dimensions That Simplify Pull Installation
The 3-3/4 inch (96 mm) center to center drilling on this pull locks in the screw hole spacing, so templates and boring jigs set to 96 mm drop into use without adjustment. The 4-1/16 inch overall length relates directly to how close the ends sit to the drilling points, helping you position pulls so they clear stile edges and neighboring hardware. With a 1 inch projection, the stand-off distance from the door or drawer front is predictable, which keeps pulls from interfering with adjacent fronts on tight reveals. The 1/2 inch width gives a defined front face for aligning level and square during installation, aiding quick visual checks as rows of pulls are mounted.
How This 96mm Center To Center Pull Works In Use
Where This 3-3/4 Inch Center To Center Pull Fits
The 3-3/4 inch (96 mm) center to center sizing aligns with common cabinet boring patterns, so this pull fits typical residential and light commercial cabinets drilled on 96 mm spacing. The 4-1/16 inch length suits standard door and drawer widths, letting you use the same pull on uppers, lowers, and vanity fronts for visual continuity. Its brushed nickel finish matches other brushed nickel components, which keeps hardware, faucets, and fixtures coordinated in kitchens, baths, and built-ins. The zinc construction places this pull comfortably in everyday cabinet and drawer duty, serving as the main touchpoint for opening and closing casework in woodworking and installation projects. With a 1 inch projection, it works well on full-overlay and partial-overlay fronts by providing sufficient finger room while staying tight to the face for a streamlined look. The 1/2 inch width makes the pull suitable for both narrow fronts and wider drawers, so one model can serve across a bank of cabinets.
Why These Dimensions Support Consistent Cabinet Results
The 3-3/4 inch (96 mm) center to center dimension allows repeatable drilling using standard 96 mm jigs, which keeps hole placement consistent and reduces layout variation from cabinet to cabinet. The 4-1/16 inch overall length places the ends only slightly beyond the holes, giving installers a clear reference for aligning pulls parallel to door and drawer edges. A 1 inch projection supplies reliable clearance for fingers behind the pull, which helps doors and drawers operate without knuckle contact against the front surface. The 1/2 inch width defines a focused grip area, helping users grasp the pull in the same way every time, supporting smooth opening action. Because the pull is zinc with a brushed nickel finish, the material and finish combination offers a familiar feel and look for cabinetry, so hardware appearance stays predictable across multiple installations. The Advantage Plus 7 collection designation ties this pull to a broader family, which matters when coordinating matching pieces across a full room or project.
Common Questions About This Berenson Cabinet Pull
What are the drilling measurements for this Berenson 96mm center to center pull?
This Berenson Contemporary Advantage Four pull uses a 3-3/4 inch (96 mm) center to center measurement, which sets the distance between mounting holes for cabinet doors and drawers.
How long is the 9395-1BPN-P cabinet handle overall?
The 9395-1BPN-P cabinet handle has a 4-1/16 inch overall length, so its ends extend slightly beyond the 96 mm hole spacing for a balanced look on typical cabinet fronts.
What projection does this brushed nickel zinc cabinet handle provide?
This cabinet handle has a 1 inch projection, meaning it stands 1 inch off the cabinet face to give enough space for fingers to pull doors and drawers.
What is the width of this Advantage Plus 7 zinc pull?
The Advantage Plus 7 pull has a 1/2 inch width, giving a slim front profile while still offering a defined gripping surface on doors and drawers.
What material and finish does this Berenson Contemporary Advantage Four pull use?
This pull is made from zinc with a brushed nickel finish, so it presents a contemporary brushed metal look suited to modern cabinetry.
How does the base dimension affect layout on cabinet fronts?
The 5-1/16 inch base dimension defines the span of the pull's footprint, helping installers set consistent clearances from edges and neighboring hardware.
Select This Pull For 96mm Cabinet Layouts
This Berenson brushed nickel cabinet pull, part of the Advantage Plus 7 collection, brings a 3-3/4 inch (96 mm) center to center layout, 4-1/16 inch length, 1 inch projection, and 1/2 inch width to cabinet projects. Those dimensions give installers and woodworkers a predictable pattern for drilling, alignment, and everyday use across doors and drawers. For cabinets set on 96 mm boring with a contemporary brushed nickel look, this zinc pull provides a consistent handle choice for the run.
