Berenson Contemporary Advantage Four Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 9396-1026-P

Berenson Contemporary Pull For Cabinet Projects

Berenson Contemporary Advantage Four pull is a zinc cabinet handle in the Advantage Plus 7 collection with a polished chrome finish, so it delivers a modern, bright look that fits well in contemporary kitchen or bath installations. The 3-3/4 inch (96 mm) center to center dimension aligns handle mounts across doors and drawers, which simplifies layout when running hardware in straight visual lines. Overall length of 4-1/16 inches keeps the pull compact, which helps when working on smaller drawer fronts or narrow face frames. A 1 inch projection sets the grip off the surface enough for fingers to clear the door, which supports comfortable everyday use. The 1/2 inch width gives a slim profile across the front, keeping the hardware visually light while still providing a defined edge to grab. Base dimensions of 5/16 inch keep contact points tight and clean against the cabinet surface.

Practical Details That Support Cabinet Workflow

• The 3-3/4 inch (96 mm) center to center spacing matches a common drilling pattern, which lets installers repeat hole locations quickly across multiple fronts on a run of cabinets.
• The polished chrome finish provides a reflective surface, which helps this pull visually coordinate with other chrome fixtures in a room for a consistent project look.
• The zinc material forms the body of the pull, which gives a solid-feeling handle that suits regular cabinet and drawer operation in residential woodworking projects.
• The 4-1/16 inch overall length keeps the pull close to the size of its mounting spread, which reduces overhang and helps with positioning near panel edges or narrow rails.
• The 1 inch projection creates working space behind the pull, which allows fingers to wrap the handle comfortably without contacting the cabinet face on each use.

Mounting Dimensions For Straightforward Installation

The 96 mm (3-3/4 inch) center to center dimension defines the hole spacing, which lets installers drill consistent pairs across doors and drawers using jigs sized to this common pattern. Base dimensions of 5/16 inch at each foot set a compact footprint, which is useful when landing the pull on narrow frame members or slim drawer rails. Overall length of 4-1/16 inches leaves only a small amount of metal beyond each mounting point, which helps keep the handle clear of neighboring edges or adjacent hardware in tight layouts. The 1/2 inch width and 1 inch projection combine to create a balanced gripping surface, which supports a comfortable pull action without dominating the cabinet face.

Using This Berenson Pull In Cabinet Projects

Where This 96 mm Cabinet Pull Fits Best

This Berenson 9396-1026-P pull, part of the Advantage Plus 7 collection, suits cabinet doors and drawers designed around a 3-3/4 inch center to center layout, which is widely used in kitchen, bath, and built-in storage runs. The polished chrome finish ties into chrome faucets, hinges, and other bright hardware, which helps create a unified appearance on projects using matching metallic tones. With a compact 4-1/16 inch length, the pull works well on standard drawer fronts and many upper cabinet doors, which allows the same part to repeat across multiple cabinet sizes for a consistent line. The 1/2 inch width and 1 inch projection combine into a slim yet accessible grip, which is helpful when installing on doors that open frequently during daily use. Zinc construction provides the structure of the handle, which supports regular opening and closing motions on typical residential cabinet installations.

Details That Support Repeatable Alignment And Results

The 96 mm center to center spacing on the Berenson Contemporary Advantage Four pull directly defines drilling locations, which allows use of standard 3-3/4 inch templates to speed layout across a job. Base dimensions of 5/16 inch give each mounting foot a compact land area, which is helpful when aligning the pull on narrow rails or stiles without crowding decorative profiles. The small difference between the 4-1/16 inch overall length and the 3-3/4 inch mounting spread keeps each end close to its screw position, which reduces visual overhang and aids in centering the pull on faces with limited flat space. A 1 inch projection sets the handle off the door just enough for fingers to clear, which supports a comfortable grip even on thicker fronts. The 1/2 inch width provides enough surface for the hand to register the pull, which contributes to consistent hand placement every time a door or drawer is operated.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 96 mm Cabinet Layouts

The Berenson Contemporary Advantage Four pull with 3-3/4 inch (96 mm) center to center spacing, zinc construction, and polished chrome finish suits projects built around this common drilling pattern. The 4-1/16 inch length, 1 inch projection, and 1/2 inch width balance grip and scale, which helps it work across both doors and drawers. With compact 5/16 inch base dimensions, the pull lands cleanly on rails and stiles used in typical cabinet construction. For cabinet runs that call for a polished chrome, 96 mm layout, this handle aligns appearance and dimensions in one part number.