Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson brushed nickel cabinet pull identifies this handle as a Berenson Corporation pull in a brushed nickel finish, so it visually matches other brushed nickel decorative hardware on a project. The Web description stating the material is zinc means the pull body is made from zinc, which provides a solid metal feel when operating cabinet doors or drawers. The description listing the center to center as 5-1/16 inches, or 128 mm, defines the hole spacing, which matters when aligning the pull with existing boring patterns. The stated overall length of 5-5/8 inches shows the handle extends slightly beyond the hole spacing, helping cover previous marks around old pulls. A projection of 1-1/16 inches describes how far the pull stands off the door or drawer face, giving fingers clearance behind the pull. The noted width of 9/16 inch sets the grip thickness across the bar, which affects how the pull feels in the hand during everyday use.
The center to center dimension of 5-1/16 inches, or 128 mm, directly influences drilling and re-drilling, because hole locations must match this spacing for the pull to sit square. With the length specified as 5-5/8 inches, the pull extends beyond the fastener points, helping span minor surface imperfections around the bore holes. The projection noted at 1-1/16 inches determines stand-off from the cabinet face, which affects how far fingers travel to reach behind the bar. A width of 9/16 inch describes the front profile of the gripping area, guiding designers who want a consistent look across multiple fronts. The base size of 7/16 inch at each mounting point clarifies the bearing area at the surface, giving a predictable visual margin around each screw location.
The Web description classifying this product under decorative hardware handles and pulls positions it as a cabinet handle suitable for doors and drawers where a visible pull is needed for everyday operation. The 5-1/16 inch, or 128 mm, center to center spacing aligns with a common drilling standard, so it fits layouts designed around 128 mm hole patterns on base cabinets, wall cabinets, and drawer banks. The overall length of 5-5/8 inches allows the pull to span a practical section of a door or drawer front, which works well on medium-width fronts in kitchens, baths, or built-in cabinetry. The 1-1/16 inch projection from the face creates space between the hand and the cabinet surface, which supports comfortable use when repeated opening and closing is expected. Because the width is specified at 9/16 inch, the pull presents a slim profile across the face, contributing to a contemporary visual line on cabinet runs.
The manufacturer part number 9398-1BPN-P clearly identifies this specific Berenson Corporation pull, which matters when matching pieces across a multi-cabinet installation or future service work. The Web description naming the collection as Advantage Plus 7 ties the pull to a defined design family, helping maintain consistent styling and proportions across different cabinet locations. The zinc material called out in the description means the pull is formed from zinc, offering a uniform substrate for the brushed nickel finish so appearance remains consistent from piece to piece. The brushed nickel finish described in the Web data provides a muted metallic look, which can help coordinate with brushed nickel hinges, faucets, or other visible hardware in the same room. With the base dimensions stated at 7/16 inch, each end of the pull contacts a known area of the cabinet surface, which supports predictable alignment against layout marks and helps establish a consistent reveal at each installation point.
This Berenson cabinet pull has a center to center dimension of 5-1/16 inches, or 128 mm, so it aligns with drilling patterns designed around the 128 mm standard.
The Berenson 9398-1BPN-P pull has an overall length of 5-5/8 inches, which lets it extend slightly beyond the mounting holes for good coverage on cabinet fronts.
This Advantage Plus 7 cabinet pull is made from zinc, giving a solid metal construction beneath the brushed nickel finish for a consistent feel in daily use.
This brushed nickel cabinet pull has a projection of 1-1/16 inches, so it stands off the door or drawer face enough to give fingers clearance behind the handle.
The cabinet handle has a width of 9/16 inch across the bar, which defines the thickness your hand feels while opening doors or drawers.
Each end of the pull has a base dimension of 7/16 inch, giving a defined footprint on the cabinet surface around each mounting point.
The Web description identifying this Berenson Advantage Plus 7 pull with a 5-1/16 inch (128 mm) center to center and brushed nickel finish gives a clear dimensional and visual profile, so it can be chosen to match existing 128 mm layouts and brushed nickel hardware runs across a project.
Sold In: 1 Each
