Berenson Contemporary Advantage Four Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 9419-4026-P

Berenson Contemporary Advantage Four Pull For Cabinets

Berenson Contemporary Advantage Four pull is a 3-3/4 inch (96 mm) center to center cabinet handle in polished chrome that provides a consistent mounting spread for doors and drawers. The pull is part of the PRO Basics collection, so it fits into a coordinated decorative hardware line for projects that need a uniform look across multiple openings. The aluminum material keeps the pull light while still giving a solid grip point for everyday cabinet use. A 4-1/2 inch overall length gives enough hand clearance across typical cabinet rail widths without crowding adjacent hardware. The 1 inch projection sets the handle off the front of the cabinet face, creating space for fingers to wrap behind the pull in a straight line. A width of 7/16 inch offers a slim profile that sits visually light on the door while still presenting a defined edge to grab.

Key PRO Basics Pull Details For Projects

• The PRO Basics collection designation ties this pull to a broader hardware family, which helps keep style consistent on multi-room or multi-cabinet runs where matching components matter.
• The aluminum material construction keeps each pull relatively light, which can ease handling during layout on large cabinet banks while still giving a stable feel once mounted.
• The polished chrome finish provides a bright, reflective surface that reads clean on cabinet faces and coordinates with other polished chrome decorative hardware elements.
• The 3-3/4 inch (96 mm) center to center dimension matches a common drilling pattern, which supports straightforward layout using standard 96 mm drilling jigs or pre-bored cabinet fronts.
• The 4-1/2 inch length or diameter dimension shows the handle extends beyond the mounting holes at both ends, which affects clearance when pulls are lined near edges or adjacent doors.
• The 1 inch projection defines how far the pull stands off the door or drawer front, which influences how easily fingers can hook behind the bar during regular opening and closing.
• The 7/16 inch width keeps the pull visually narrow on the face frame, which can matter when balancing hardware scale with slim drawer fronts or narrow rails.

96 Mm Center To Center Cabinet Pull Fit

The 96 mm center to center drilling spread on this pull aligns with a widely used metric cabinet standard, so hole layout can follow familiar measurements across many casework runs. The 4-1/2 inch overall length means the bar extends slightly past the mounting points, which can help visually center the grip area over drawer widths without feeling oversized. With a 1 inch projection, the handle stands off the surface just enough to clear typical door profiles while still keeping the hardware close to the face for a compact footprint. The 7/16 inch width keeps the pull slim, which works well on modern, flat-panel cabinetry where a lower-profile line is preferred. The polished chrome finish and PRO Basics collection labeling place this part within a coordinated set of decorative hardware options for consistent project planning.

How This Polished Chrome Pull Works In Use

Where This 96 Mm Cabinet Pull Fits Best

This 96 mm center to center cabinet pull fits applications that follow standard metric drilling, such as many kitchen, bath, or built-in cabinet layouts using 96 mm spacing. The 4-1/2 inch length allows the pull to sit proportionally across typical drawer fronts, from smaller bath drawers to mid-width kitchen drawers, without dominating the face. Because the projection is set at 1 inch, the handle offers a finger gap that suits routine opening on base and wall cabinets while staying tight to the door front, which can matter in narrow walkways. The 7/16 inch width gives the pull a lean profile that pairs well with contemporary casework where straight lines and minimal hardware mass are preferred. As part of the PRO Basics collection from Berenson Corporation, this pull works within a defined series of decorative hardware that supports a unified appearance across a full room of cabinetry.

Details That Support Repeatable Cabinet Installations

The 96 mm center to center dimension on the Berenson Contemporary Advantage Four pull allows installers to reuse the same drill setup across multiple doors and drawers, which can speed repetitive work on larger jobs. The aluminum material helps reduce weight at each mounting point, which can be useful when a bank of cabinets carries many pulls across tall pantry and wall runs. A 1 inch projection provides a consistent standoff from the door surface, helping rows of hardware line up cleanly when viewed from the side. The 4-1/2 inch overall length creates a predictable edge-to-hole distance at each end, which aids in aligning pulls evenly relative to stile edges or drawer borders. The polished chrome finish is part of the defined product specification, so matching finish selections across hinges, knobs, and pulls in polished chrome is straightforward when building a coordinated hardware schedule.

Common Questions About This Berenson Cabinet Pull

Selecting This 96 Mm Pull For Your Project

This Berenson Contemporary Advantage Four pull combines a 3-3/4 inch (96 mm) center to center size, 4-1/2 inch length, and 1 inch projection in a polished chrome PRO Basics design. Those dimensions, paired with aluminum construction and a 7/16 inch width, provide a slim, consistent hardware option for cabinets and drawers where a 96 mm drilling pattern and polished chrome finish are already part of the plan.