
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson brushed nickel cabinet knob is a round zinc knob designed for cabinet and furniture doors or drawers, so it gives projects a consistent look across the job. The knob has a 1-1/4 inch diameter, which provides a familiar hand feel when opening and closing. Its brushed nickel finish keeps reflections muted, which helps the knob blend with many contemporary and transitional schemes. The knob projects 1-1/8 inch from the mounting surface, giving fingers clearance to pull without crowding. This knob is part of the Advantage Plus 7 collection, so it aligns with that series when coordinating across a space. The base measures 3/4 inch across, so the contact area against the door or drawer face is well defined for layout and drilling. The zinc construction supports everyday cabinet use in typical residential or light commercial settings.
This 1-1/4 inch diameter cabinet knob mounts through the door or drawer face using its 8-32 screw interface, which aligns with the common threaded size used on many cabinet hardware layouts. The specified 1-1/8 inch projection determines how far the knob stands off the surface, which factors into clearances near adjacent doors, walls, or appliance panels. With a 3/4 inch base, the knob seats on a compact footprint, which helps it work on narrow rails or stiles without crowding edges. The consistent round profile allows installers to focus mainly on hole location rather than rotational alignment, which streamlines installation on multi-knob projects.
This Berenson Corporation knob is categorized under decorative hardware and moldings for knobs, so it fits cabinet and furniture applications where a finished pull point is needed. The 1-1/4 inch diameter and 1-1/8 inch projection make it suitable for typical kitchen, bath, or built-in cabinet door and drawer fronts that follow standard thickness ranges. Being part of the Advantage Plus 7 collection helps it tie into other pieces from that line, which matters when a project calls for matching knobs across multiple rooms or banks of cabinets. The brushed nickel finish gives a neutral metallic tone, which works alongside many painted surfaces and common wood stain colors without dominating the design.
The 1-1/4 inch round head and 3/4 inch base give predictable geometry, which helps installers repeat spacing from edges and between adjacent doors. The single-hole knob design, paired with the 8-32 thread size, means hole drilling focuses on accurate center marking rather than multi-hole alignment. The 1-1/8 inch projection remains constant across all units of this part number, which keeps door and drawer fronts visually aligned when viewed in profile. The zinc construction maintains uniform weight and balance from knob to knob, which supports a consistent feel when clients operate different doors on the same elevation. Because the knob sits on a defined base, it creates a clear contact ring against the surface, which can assist with accurate touch-up layout or future replacement using the same Berenson 9432-4BPN-P part.
The knob has a 1-1/4 inch diameter, which provides a comfortable grip area and gives installers a clear reference when laying out hardware locations on doors and drawers.
The knob projects 1-1/8 inch from the mounting surface, which offers finger clearance for pulling doors or drawers while keeping the profile reasonably tight to cabinetry.
The knob is made of zinc, which provides a solid body for everyday cabinet use and supports a consistent brushed nickel finish across multiple pieces.
The knob uses an 8-32 screw size, which matches a common cabinet hardware thread standard and helps align with existing drilling setups and jigs.
This knob is part of the Advantage Plus 7 collection, which helps coordinate its style and finish with other Berenson pieces from the same series.
The knob has a 3/4 inch base dimension, which defines its footprint on the cabinet surface and helps gauge proportion on rails, stiles, and drawer fronts.
This Berenson brushed nickel cabinet knob combines a 1-1/4 inch diameter head, 1-1/8 inch projection, and 3/4 inch base, which gives installers predictable geometry for repetitive layouts. The zinc construction and brushed nickel finish, together with the 8-32 thread size and Advantage Plus 7 collection identity, help align the knob with standard cabinet drilling practices and coordinated hardware schemes. For projects calling for a round brushed nickel pull point from Berenson Corporation, this 9432-4BPN-P knob offers clear, measurable dimensions that support planned cabinet and furniture work.
Sold In: 1 Each