
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 16 inch over travel soft close drawer slides use the 8455 Series integrated soft-close design to control closing force, which helps drawers seat consistently in everyday shop or cabinet use. The full extension travel lets the drawer open its full length, so stored items remain accessible without fighting a partial opening. A 90-pound rating supports drawers built for heavier residential or light commercial loads; this supports confident use in many cabinet applications. The side mount, ball bearing design uses three ball bearings per inch, which supports smoother movement under load. The non-handed construction lets the same slide work on either side of the drawer, which simplifies layout and reduces orientation errors during installation. The zinc finish creates a clean, uniform appearance along the case side, which helps the hardware blend into standard cabinet interiors.
The unhanded side mount design means each 8455FMB 16 slide can be used on either the left or right, which simplifies stocking and speeds up installation on repetitive jobs. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side sets a clear target when building drawer boxes, which supports drawers that track smoothly without side-to-side play. The 32 mm pattern noted for this model aligns hole locations to the common 32 mm system, which helps integrate these slides into casework built around line-bored holes. Recommended fasteners of #7 x 5/8 inch Phillips pan head screws define a shank size and length, which supports good bite into cabinet material while matching the slide mounting holes.
The 8455FMB 16 side mount drawer slides fit applications needing 16 inch full extension travel, which suits many base and utility cabinet depths. The 90-pound rating supports drawers that carry moderate to heavier contents, which is useful in kitchens, shops, or storage pieces built around typical cabinet construction. The full extension function means the drawer can open to expose the entire box length, which helps during loading, unloading, and viewing stored items. The zinc finish on these Knape and Vogt 8455 Series slides provides a neutral metallic surface, which works well inside most cabinetry where a bright but unobtrusive runner is preferred. The ball bearing construction, with three ball bearings per inch, supports smooth motion under varying loads, which contributes to predictable operation across the slide stroke.
The integrated soft-close system with Force Management technology manages closing force and pull-in, which helps drawers seat without bounce and supports a consistent closing feel from one cabinet to the next. The ball retainer latch and ramps are designed to allow easy drawer insertion, which helps installers engage the slide members efficiently during assembly. A push-in lever provides for easy drawer removal, which aids adjustments, onsite modifications, or service work after installation. The side clearance tolerance of plus 1/32 inch and minus 0 inch on each side defines a tight but workable range, which helps reduce racking and supports long-term tracking of the drawer. The non-handed 8455 Series layout reduces part variation on the job site, which streamlines installation workflows where multiple identical cabinets use the same slide set.
The 8455FMB 16 is a Knape and Vogt 8455 Series side mount, full extension, soft-close ball bearing drawer slide, which supports smooth, controlled drawer travel.
The 8455FMB 16 drawer slides are 90-pound rated, which supports drawers carrying moderate to heavier loads within that design capacity.
The 8455FMB 16 has a 16 inch length, which suits drawer and cabinet designs built around that nominal depth for full extension travel.
The 8455FMB 16 requires 1/2 inch side clearance plus 1/32 inch minus 0 inch on each side, which guides drawer box width for smooth tracking.
The integrated soft-close with Force Management technology slows and pulls the drawer closed in a controlled way, which reduces slamming and helps drawers seat consistently.
The 8455FMB 16 is a side mount slide that uses a 32 mm pattern, which suits cabinets built around system line-boring layouts.
Choosing the Knape and Vogt 16 inch over travel soft close drawer slides 8455 Series, unhanded side mount zinc bulk-pack 8455FMB 16 aligns slide length, 90-pound rating, 32 mm pattern, and soft-close action with cabinet projects needing full extension and controlled closing performance.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-B Mfr# 8404B | Face Frame Bracket for 8400 Slides, Front-Mount, Zinc | ||||
Sold in: 1 Each | KV8404 Mfr# 8404 | Face Frame Bracket for 8400 Series Slides, Front Mount, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8403 Mfr# 8403 | Rear Mounting Brackets for 8417 & 8419 Slides, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Set | KV8455FMB-18 Mfr# 8455FMB 18 | KV8455 18" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 18 | ||||
Sold in: 10 Set | KV8455FMB-28 Mfr# 8455FMB 28 | KV8455 28" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 28 | ||||
Sold in: 10 Set | KV8455FMB-26 Mfr# 8455FMB 26 | KV8455 26" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 26 | ||||
Sold in: 10 Set | KV8455FMB-24 Mfr# 8455FMB 24 | KV8455 24" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 24 | ||||
Sold in: 10 Set | KV8455FMB-22 Mfr# 8455FMB 22 | KV8455 22" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 22 | ||||
Sold in: 10 Set | KV8450FMB-20 Mfr# 8450FMB 20 | KV8450 20" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8455FMB 20 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-KIT Mfr# 8404B KIT | Face Frame Bracket kit for 8400 Series Slides, Zinc |