Knape And Vogt 18 Inch Soft-Close Drawer Slides

Knape and Vogt 18 inch over travel soft-close drawer slides pair a full extension, 90-pound rated slide with an integrated soft-close system, so drawers open to full access under load while closing in a controlled way on everyday jobs. The 8455 series soft-close ball bearing drawer slides use Force Management technology, which moderates closing force so the drawer is pulled in smoothly instead of slamming, helping protect fronts and joinery in repeated use. Their side mount design fits standard casework layouts where installers rely on predictable clearances. Three ball bearings per inch support the drawer along the entire travel, which distributes load and reduces rough spots through the stroke. Polymer stop cushions work with the bearings to absorb impact at travel limits, which matters in busy environments where drawers see frequent, firm use.

Key 8455FMB 18 Slide Details For Projects

• The full extension design lets the drawer travel completely out of the cabinet, so the user can reach items at the back without shifting contents during daily use.
• The 90-pound rating means the slide is built for typical loaded drawers, providing capacity for tools, supplies, or dense hardware while maintaining consistent motion.
• The integrated soft-close with Force Management technology slows the last part of travel, pulling the drawer closed gently so fronts, faces, and stops see less impact over time.
• The non-handed design allows either side installation with the same part, simplifying layout and stocking when building or servicing multiple cabinet runs.
• Three ball bearings per inch and polymer stop cushions support smooth, quiet operation, which helps maintain a professional feel in finished cabinetry and casework.
• The 32 mm pattern provides a familiar hole layout, aligning with system-built cabinet construction where repeatable drilling patterns speed installation.

Side Mount 18 Inch Slide Fit And Clearances

The 8455FMB 18 side mount drawer slides are specified with 1/2 inch plus 1/32 inch minus 0 side clearance on each side, which defines the required gap between the drawer and cabinet for proper travel. This fixed clearance helps installers size drawer boxes so the ball bearings track correctly without binding, supporting consistent results across a bank of drawers. The slide height of 1-13/16 inch sets the vertical space needed on the drawer side, which matters when working around shallow boxes or closely stacked drawers. Their 18 inch length matches common cabinet depths, allowing the full extension design to bring the drawer front comfortably beyond the face frame or edge of the box for better access.

Using 8455 Series Slides In Cabinet Builds

Where Knape And Vogt 8455FMB Slides Are Applied

The Knape and Vogt 8455FMB 18 slides fall in the side mount drawer slides class, so they are suited to cabinet designs that rely on case side mounting instead of undermount hardware. Their 18 inch length pairs well with mid-depth base cabinets and utility units where full extension access is needed but overall box depth is moderate. The 90-pound rating positions these slides for drawers carrying typical residential or light commercial loads, such as hardware assortments, tools, or kitchen items that benefit from stable support across the stroke. Because the design is non-handed, the same slide can be used on both left and right sides, which streamlines layout in production shops and reduces the chance of grabbing the wrong part at installation. The 32 mm pattern aligns with system-32 cabinet drilling, letting shops that already use this method integrate the 8455 series into existing boring patterns without rethinking hole locations. Side clearance of 1/2 inch plus 1/32 inch minus 0 on each side further supports this system work, giving precise drawer width targets that work repeatedly from cabinet to cabinet.

Details That Support Repeatable Drawer Performance

The 8455 series full extension mechanism allows the drawer to travel fully out, exposing the entire box so contents are visible and reachable without shuffling items, which is valuable in storage-heavy installations. Integrated soft-close with Force Management technology manages the energy of closing, taking over in the last part of travel so the drawer is drawn in and seated consistently, reducing shock on slides and cabinet structure. Three ball bearings per inch spread the load along the members, so motion remains smoother under weight, helping drawers feel stable when heavily filled. Polymer stop cushions work with the bearing system at travel limits, absorbing impact as the slide reaches full extension and fully closed positions, which supports quieter operation in occupied spaces. The specified height of 1-13/16 inch gives builders a clear dimension when planning notches, clearances, or side profiles on drawer boxes, which helps reduce rework when repeating a design across many units.

Common Questions About 8455FMB 18 Drawer Slides

Selecting 8455FMB 18 Slides For Your Project

The Knape and Vogt 18 inch over travel soft-close drawer slides combine full extension, a 90-pound rating, and side mount installation, giving a clear fit for standard-depth cabinets needing controlled, smooth motion. Their specified 1/2 inch plus 1/32 inch minus 0 side clearance and 1-13/16 inch height define drawer box sizing so builders can plan repeatable casework. With integrated soft-close using Force Management technology and three ball bearings per inch, these 8455 series slides offer a practical solution when consistent feel and predictable fit matter across multiple drawers.