Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top angled hinge handles full overlay doors on cabinets set at a 45-degree outward angle, with BLUMOTION soft-close and INSERTA tool-free mounting, on both face-frame and frameless boxes.
A standard concealed hinge assumes a cabinet face at 90 degrees. On a bay window cabinet, a diagonal corner unit, or any case where the door swings off an angled face, that geometry changes, and the arm positioning has to change with it. This hinge carries a +45 degree cabinet angle built into the arm, so the door hangs plumb and the reveal stays even without forcing the plate or shimming the cup. The 35mm cup bores into the door in the standard way, and the arm clips to a Blum base plate on the cabinet, sold separately. The 110-degree opening gives everyday access once the door is in place.
The hinge is plated steel in a nickel finish, a neutral mid-tone that reads as professional hardware without demanding a match to chrome or brass. INSERTA earns its keep specifically on angled cabinet runs: pressing the plate straight into 5mm system holes means one less variable in an install where the angle itself is already the tricky part. BLUMOTION handles the daily load after that, bringing the door to a quiet stop on every close. The three-way adjustment is there for the fine work, letting you dial the door square after the plate is set.
This hinge suits cabinet shops and contractors building or renovating kitchens with bay window sections, diagonal corner cabinets, or angled accent cases. It works on both frameless and face-frame construction when paired with the corresponding Blum plate. INSERTA requires the cabinet to have pre-drilled 5mm system holes; for a box without them, the screw-on plate version covers the same application. For doors thicker than 22mm, a thick-door hinge is the right call. Designers specifying a full run of angled bay cabinets can pair this hinge with a matching Blum plate to keep the plate system consistent across every position in the run.
The arm geometry is set for a +45 degree outward cabinet angle. On a straight cabinet, a standard hinge aligns the door correctly. On a bay or diagonal cabinet, the angled arm is what keeps the door plumb and the reveal consistent. Using a standard hinge on an angled face forces the plate off-axis and throws the door out of square.
No. The hinge clips to a Blum base plate that mounts to the cabinet, and the plate is sold separately. Match a Blum plate to your cabinet construction and door position.
INSERTA depends on 5mm pre-drilled system holes in the cabinet side. Without them, choose the screw-on plate version of this hinge for the same +45 degree application.
Yes. It is suited for both frameless and face-frame construction. Use the Blum face-frame plate that matches your stile width and door position.
When the cabinet face steps out at 45 degrees, this hinge keeps the door square, the close quiet, and the install moving without extra fitting work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP173H7100 Mfr# 173H7100 | 0mm CLIP Wing Mounting Plate with Cam Adjustment Screw-On Blum 173H7100 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP175H919022 Mfr# 175H9190.22 | CLIP 2-Piece Wing Mounting Plate, Nickel-Plated, System Screw, 18mm |
