Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top concealed hinge is built for cabinet doors that meet a face at a positive 45-degree cabinet angle, such as bay windows, diagonal corner units, and outward-angled casework, on both face-frame and frameless boxes. The nickel finish integrates cleanly with standard cabinet hardware without drawing attention to the hinge itself.
Diagonal and bay cabinets present a door face that is not parallel to the cabinet interior. A standard concealed hinge seats incorrectly on these boxes because its geometry assumes a 90-degree corner. This hinge carries the +45 degree arm angle that orients the door correctly against an outward-angled face. The 95-degree opening is the clearance that an angled door needs to swing free without hitting the adjacent panel: it is the correct angle for this application, not a restriction.
The 35mm cup bores into the back of the door at the standard depth. The arm then connects to a Blum base plate mounted to the cabinet, which is sold separately and matched to your cabinet construction. For frameless boxes with pre-drilled 5mm system holes, the INSERTA plate presses straight in without plate screws. On face-frame cabinets, use the face-frame plate in the Blum range. Plates are Blum-specific and are not interchangeable with plates from other brands.
The hinge body is steel with a nickel finish. Nickel is a neutral, mid-tone finish that coordinates with brushed stainless pulls, chrome fixtures, and most satin hardware families without competing. It is the practical default for projects where the hinge sits partially visible behind a half-overlay door and a clean, consistent look matters across the cabinet run.
Specify this hinge on diagonal base cabinets at bay windows, angled upper cabinets at room corners, and any casework where the door face meets the box at a 45-degree outward angle. It works on both frameless and face-frame construction, so it carries through a mixed project. Cabinet shops building specialty corner units, designers specifying bay-window kitchens, and contractors fitting angled entertainment centers all reach for this part when the box is not a standard 90-degree corner. For a standard right-angle cabinet, a straight-arm or cranked-arm CLIP top hinge in the same series is the correct choice instead.
No. The base plate mounts to the cabinet and is sold separately. Choose a Blum plate matched to your cabinet type: frameless INSERTA plates press into 5mm system holes, and face-frame plates fasten to the stile. Plates from other brands will not connect to this hinge.
The 95-degree opening is correct for this application. An angled door needs a reduced swing to clear the cabinet face and the adjacent panel without collision. This is how the hinge is engineered for the +45 degree geometry, not a shortcoming.
No. This hinge has a self-close spring that pulls the door shut over the last few degrees of travel. It does not cushion or slow the close. For a damped, quiet close on an angled cabinet, look for the BLUMOTION soft-close version of this series.
INSERTA is Blum's plate-to-cabinet mounting method. The plate carries pre-mounted system screws that press into the cabinet's 5mm pre-drilled holes without additional screws or tools. If your cabinet does not have 5mm system holes, use the screw-on plate version instead.
When the job calls for half overlay doors on a +45 degree angled cabinet face, this hinge brings the correct geometry, a self-closing spring, and toolless plate mounting together in a nickel finish that blends with standard hardware across the project.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP173H7100 Mfr# 173H7100 | 0mm CLIP Wing Mounting Plate with Cam Adjustment Screw-On Blum 173H7100 |
