Pockit® Point LED 1W Warm White Spot Light, Black

Pockit Point LED 1W Warm White Cabinet Lighting

Pockit Point LED 1W warm white spot light delivers focused illumination while drawing only 1W, so it adds usable task or accent light with minimal electrical load in cabinets, displays, or similar woodworking installations. The 12VDC rating pairs with low-voltage lighting systems, supporting safer runs in tight furniture or millwork cavities where line voltage is not desired. Warm white 3000K light output creates a softer tone that suits residential kitchens or commercial casework needing comfortable, inviting illumination. The mini-spot format directs light to a defined area, which helps highlight specific shelves or work zones rather than flooding the whole space. The black finish visually recedes against dark interiors, helping the light read as illumination rather than visible hardware in the completed project.

Key LED Spot Light Details For Cabinet Work

• The 1 inch bore hole requirement sets a clear drilling size, so fabricators can prep panels accurately before finishing, reducing on-site modification during installation.
• The 1-3/16 inch overall diameter creates a slight flange around the bore, which helps visually clean up the cut edge and provides a stable seating surface in the panel.
• The 1/2 inch height keeps the fixture low profile, so it projects minimally from the mounting surface and helps maintain clean interior lines inside cabinets or displays.
• The attached 79 inch lead cord offers reach from the fixture to a connection point, supporting flexible driver placement within casework runs or under-cabinet voids.
• The 90 degree beam spread focuses light forward in a defined cone, which concentrates output on shelves or work surfaces instead of spilling broadly into surrounding areas.
• The 30,000 hour bulb life rating means the LED light source is designed for long service, which reduces changeout frequency in built-in millwork where access can be constrained.

Mounting And Fit Details For This Mini Spot

The required 1 inch bore hole defines the core mounting method, so installers can rely on a standard bit size when boring panels for this mini-spot. With a 1-3/16 inch overall diameter, the light seats with a visible trim ring that overlaps the hole, giving a clean finished edge even when cuts are in melamine or veneer panels. The 1/2 inch height determines how far the fixture stands proud, important when placing lights above shelves where clearance to stored items matters. The 12VDC design means the light integrates into low-voltage layouts, which are common in under-cabinet and display lighting runs in woodworking projects.

How This 1W 12VDC Mini Spot Works In Practice

Warm White 3000K Output For Casework And Displays

This Tresco Lighting 1W 12VDC mini-spot/eye LED produces warm white 3000K light, so the tone aligns with typical residential and hospitality environments where a softer color temperature is preferred. In cabinet interiors, that color helps woodgrains and finishes appear natural rather than washed out by cooler light. Because the product is classified as an LED puck light and mini-spot, it functions well where small, focused points of light are needed along a run of casework. The black housing blends into dark cabinet interiors, allowing the illuminated area to stand out more than the fixture body. For showroom displays or retail fixtures, the 90 degree beam spread projects a controlled cone, so product on a shelf or in a niche receives emphasis without brightening unrelated areas nearby.

Beam, Bore, And Lead Length Supporting Clean Installs

The specified 90 degree beam spread defines how the Pockit Point LED 1W warm white spot light throws light across a surface, which lets installers position the bore so the beam edge lands where desired on countertops or display shelves. The 1 inch bore hole specification standardizes the cut size, which supports efficient shop drilling before assembly and keeps field drilling predictable when retrofitting existing cabinets. With the fixture measuring 1-3/16 inch overall diameter, there is consistent overlap around the hole, which helps hide minor drilling variations on site-built work. The attached 79 inch lead cord gives enough length to route wiring through cabinet partitions to a central low-voltage connection point, simplifying driver layout in longer cabinet runs. Combined, these verified dimensions and electrical details help produce repeatable, tidy installations across multiple identical cabinets or display units.

Common Questions About This Pockit Point LED Light

Select This Mini Spot For Focused Cabinet Lighting

The Pockit Point LED 1W warm white spot light from Tresco Lighting pairs low 1W draw with 12VDC operation, 3000K warm output, and a 90 degree beam, making it suitable for focused cabinet or display illumination. With its 1 inch bore hole requirement, 1-3/16 inch overall diameter, and 1/2 inch height, it fits neatly into prepared panels and maintains a compact profile. The attached 79 inch lead cord and 30,000 hour bulb life support straightforward installation and long service in woodworking projects handled through Wurth Baer Supply.