Pockit® Point LED 1W Warm White Spot Light, Nickel

Pockit Point LED 1W Warm White Spot Light

Pockit Point LED 1W warm white gives you a compact, focused spot light that runs on 12VDC power, so it ties into low-voltage layouts where controlled task or accent lighting is needed without adding high wattage to the run. The 1W draw keeps energy use down while still delivering a defined beam, which helps when you are lighting small work areas or highlighting details instead of flooding a whole cabinet. Warm white 3000K output creates a softer, more comfortable tone, which works well in residential kitchens, display cases, or woodwork where a warmer color helps finishes read true. The high performance design is paired with low energy draw, so it supports longer runs on a transformer compared to higher wattage spots. Tresco Lighting branding and the specific L-LED-1EB-WNI-1 part number help you match this light to existing layouts or documentation on a job.

Key LED Spot Light Details For Trade Use

• The 1W rating provides a defined spot of light while limiting load on 12VDC drivers, which is helpful when you are balancing multiple fixtures on a limited-capacity system.
• The 12VDC design works in low-voltage lighting layouts, so this light can be integrated into common cabinet and display systems that already run on 12VDC power supplies.
• The warm white 3000K color temperature produces a softer beam that complements wood tones and residential spaces, giving finished installations a comfortable look.
• The nickel finish gives the visible trim a neutral metal appearance, which blends with many hinge finishes and cabinet hardware in contemporary or transitional projects.
• The high performance, low energy draw description signals an efficient LED engine, which supports extended use without adding unnecessary power consumption to the project.
• The attached 79 inch lead cord offers generous reach from the bore hole to the power connection point, which can simplify routing in cabinets, cases, or shelving.

Installation Details For The 1 Inch Bore Light

The specified 1 inch bore hole diameter means this spot light is designed to sit in a 1 inch drilled opening, giving installers a clear target size when preparing cabinets or display panels. The overall 1-3/16 inch diameter provides a slightly larger trim ring around the bore, which covers the cut edge for a clean finished look. A 1/2 inch height keeps the fixture low profile, so it projects minimally from the mounting surface and stays unobtrusive inside cabinets or shallow recesses. The attached 79 inch lead cord gives you room to route wiring to a hidden junction or driver location without tight bends right at the light.

LED Mini Spot Performance In Cabinet And Display Work

Where This 1W 12VDC Mini Spot Eye LED Works

The 1W 12VDC mini spot eye LED format suits cabinet interiors, display cases, and other millwork that use low-voltage systems, because the compact housing fits in tight spaces without demanding extra depth. The 90 degree beam spread creates a focused but still usable cone, which can highlight a section of shelving or a work surface without washing light across the entire room. Warm white 3000K output lines up with typical residential and light commercial color preferences, so the same fixture can move between kitchen, bath, and retail cabinetry jobs. The nickel trim coordinates with many common hinge and pull finishes, allowing the fixture to read as part of the hardware package rather than a visual distraction in the cabinet. With a bore hole requirement of 1 inch and an overall diameter of 1-3/16 inch, this light suits applications where precise, repeatable drilling patterns matter, such as shop-built cabinet runs or modular fixtures.

Why These LED Puck Details Support Repeatable Results

The clearly stated 1 inch bore hole and 1/2 inch height give fabricators dependable cutout and clearance numbers, which helps standardize shop templates and reduce rework in repetitive cabinet lines. The 90 degree beam spread offers predictable light distribution from each fixture, so you can plan fixture spacing with confidence when laying out multiple spots along a run of upper cabinets or display shelves. A rated bulb life of 30,000 hours means the LED engine is built for long service, which reduces changeouts in finished installations and is valuable in built-ins that are harder to access once installed. Warm white 3000K color consistency across fixtures keeps a bank of cabinets looking uniform, so mixed color temperatures do not distract from the woodwork or product display. The attached 79 inch lead cord length is fixed and known, allowing installers to design wire paths and driver locations to align with that reach on drawings and in the field.

Common Questions About This Tresco Lighting Puck

Selecting This LED Puck For Your Next Install

This Pockit Point LED 1W warm white spot light from Tresco Lighting combines a 1 inch bore hole fit, 12VDC operation, and a 90 degree beam spread, giving you a defined, warm 3000K beam for cabinets or displays. The nickel finish, low 1/2 inch height, and 1-3/16 inch overall diameter keep the fixture compact while still covering the cut edge. Pair the 1W draw and 30,000 hour bulb life with the 79 inch lead cord to plan efficient, low-maintenance layouts on your next Wurth Baer Supply project.