Pockit Point LED 1W Warm White Spot Light

Pockit Point LED 1W warm white gives you a compact spot light that delivers focused illumination while keeping energy use low. The 1W power draw provides light output with minimal load on a 12VDC system, which suits multi-light cabinet runs. The 12VDC rating aligns with common low-voltage drivers used in built-ins and display work, supporting straightforward integration. The warm white 3000K color temperature creates a softer tone that suits residential and commercial millwork where a warmer visual effect is desired. The fixture is designed as a mini-spot or eye-style LED, so it concentrates light into a defined area, which is useful for task zones, accent points, or small display niches. The white finish lets the light blend into light-colored surfaces, keeping the focus on the lit area rather than the fixture body.

Key LED Spot Details For Cabinet Projects

• The high performance description signals that this LED is engineered to deliver usable light output from a 1W load, which matters when planning multiple fixtures on limited transformer capacity.
• The low energy draw works with the 1W rating to reduce overall system consumption, which can simplify driver sizing on longer cabinet, casework, or shelving runs.
• The bore hole size of 1 inch defines the cutout needed in panels, doors, or soffits, which helps with accurate drilling and consistent alignment across repeated installations.
• The overall diameter of 1-3/16 inch creates a small flange around the bore, which can cover clean drill edges and give a finished look on visible surfaces.
• The 1/2 inch height keeps the fixture profile low, which is useful where recess depth is limited behind thin panels or shallow cabinet components.
• The 90 degree beam spread defines how wide the light cone opens, which helps position the fixture so the beam covers the target work surface or display area.
• The 30,000 hour bulb life rating describes long operating life for the LED, which reduces the frequency of fixture replacement in built-in applications.
• The warm white 3000K bulb color sets a softer, more inviting tone, which suits kitchens, living spaces, and display cases where neutral-warm light is preferred.

Installation And Cutout Details For This LED

The 1 inch bore hole requirement tells you the exact hole size to drill for mounting this light, which supports repeatable placement across multiple panels or cabinets. The 1-3/16 inch overall diameter means the visible trim slightly overlaps the cutout, which helps mask drill tolerances and keeps the edge line clean on finished faces. The 1/2 inch height indicates how far the body projects, which is useful when planning recess depth in substrates or evaluating clearance behind the mounting surface. The 12VDC rating defines the electrical environment this LED is built for, which aligns it with standard low-voltage cabinet lighting systems and transformers.

Using This Mini Spot In Real Projects

Mini Spot LED For Cabinets And Displays

This 1W 12VDC mini-spot or eye LED functions as a small-format puck light, which fits well into cabinet, shelf, or niche applications where space is tight. The 90 degree beam spread sends light outward in a controlled cone, which helps highlight specific areas such as countertop segments, shelf contents, or display objects without over-lighting adjacent surfaces. The warm white 3000K output creates a softer illumination that supports comfortable visual contrast on wood grains and laminates. The white body color lets the fixture visually recede on light-toned substrates, which keeps attention on the project rather than the hardware. With 30,000 hours of rated bulb life, the LED is suited for built-in locations where long service life contributes to reduced disruption once casework is in place.

Details That Support Consistent Lighting Results

The defined 1 inch bore hole and 1-3/16 inch overall diameter give tight control over the relationship between the cutout and trim, which helps installers produce consistent sightlines across banked cabinets or repeated bays. The shallow 1/2 inch height makes it easier to plan for recess depth in thin panels or tight cavities, which matters when working in face frames, valances, or compact display constructions. The 1W load per fixture simplifies load calculations on 12VDC drivers, which supports balanced layouts when running multiple lights on a single circuit. The combination of a 90 degree beam spread and warm white 3000K light output helps produce even, comfortable coverage across nearby work surfaces, which is valuable when aligning fixture spacing to avoid hot spots or dark gaps in continuous runs.

Common Questions About This Tresco Puck Light

Select This LED Puck For Warm Focused Lighting

The Tresco Lighting Pockit Point LED 1W warm white spot light combines a 1W 12VDC load, 3000K warm white output, and a 90 degree beam spread, making it suited for focused cabinet or display lighting where a compact, low-profile cut-in puck is required.