NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPL3020CUF2 to RSL3020CUF2.

Omega National Cherry Wine Bottle Storage Panel Use

Omega National cherry wine bottle storage gives you a dedicated panel built for holding bottles in kitchen and bath cabinet projects, so you can integrate wine storage cleanly into custom cabinetry layouts. The panel sheets measure 23 inches by 42 inches, which lets you design tall or base cabinet applications where that footprint fits your run. With 27 openings designed for wine bottles, the panel organizes multiple bottles in a repeatable grid, which matters when you want predictable, even spacing on a finished face. All joints are glue and mechanically fastened, creating a rigid assembly that stays square while you handle, cut, and install it into a cabinet frame or enclosure. Panels are produced from standard moldings that are 3/4 inch wide by 7/16 inch thick with square edges, so the front view reads as a consistent lattice pattern that works with typical cabinet door and face-frame proportions.

Key Wine Bottle Rack Details For Cabinet Work

• Available in cherry as one of six unfinished species, so you can stain or finish the panel to match surrounding ash, cherry, hickory, maple, red oak, or alder cabinet components on the same job.
• Bottle openings are 3-3/4 inches by 3-3/4 inches, sizing each bay for a typical wine bottle footprint so bottles nest in a controlled grid rather than shifting loosely in a cabinet.
• Panel sheets measure 23 inches by 42 inches, which suits many upper and tall cabinet interiors and gives you a predictable starting dimension when laying out your cabinet design.
• Panels are easily cut to desired size, letting you trim the lattice to fit specific cabinet widths or heights without redesigning the storage concept for each opening.
• Panels are produced from standard moldings 3/4 inch wide by 7/16 inch thick with square edges, creating consistent narrow rails that keep bottle openings uniform across the entire panel face.

Wine Rack Panel Cutting And Cabinet Fit Details

The 23 x 42 inch wine bottle rack panel size means many cabinet interiors can accept the panel with only crosscutting or ripping, which speeds layout during shop planning. Because the panel is easily cut to desired size, you can adapt the grid to partial-height openings, narrow cabinet bays, or stacked layouts while keeping the same 3-3/4 inch by 3-3/4 inch bottle openings. The standard moldings at 3/4 inch wide by 7/16 inch thick with square edges form a stable lattice that tracks well against fences and stops when you run it through saws, helping you hold alignment. Glue and mechanically fastened joints keep the intersections tight as you cut and handle the panel, so the finished piece maintains square bottle openings that match the rest of the rack field.

Wine Bottle Rack Use And Project Planning

Where This Omega National Wine Rack Works Best

This Omega National wine bottle storage panel fits kitchen and bath cabinet projects where a 23 inch by 42 inch sheet can be integrated into a carcass or open shelving bay. With 27 openings, the panel supports layouts that call for a dense field of wine storage, which is helpful in tall pantry-style cabinets or flanking upper cabinets around a range or sink. The bottle openings at 3-3/4 inches by 3-3/4 inches keep bottles in repeated square cells, so rows and columns line up visually when doors are open or when the panel is used in open display cabinets. Because the panel is unfinished cherry, it matches cherry cabinet programs and can be finished alongside doors, drawer fronts, and face frames, keeping the wine rack visually consistent with the rest of the room millwork.

Why These Construction Details Support Repeatable Results

Glue and mechanically fastened joints in the cherry wine bottle storage panel create a rigid lattice, which matters when panels are crosscut or ripped to fit specific cabinet openings, because joints stay tight instead of separating under handling. The standard moldings at 3/4 inch wide by 7/16 inch thick with square edges give you predictable rail thickness, so you can align edges to face frames, filler strips, or trim without odd step-offs. Panel sheets produced in a stable 23 inch by 42 inch format simplify shop drawings, because you can plan cut lists knowing every piece starts from that same size. Being easily cut to desired size means offcuts from one cabinet can be used in another small opening, improving material use while keeping bottle openings at the same 3-3/4 inch by 3-3/4 inch dimension from cabinet to cabinet. The unfinished cherry surface also allows finishing schedules to be coordinated with other cherry components, supporting consistent color and sheen across the installation.

Common Cherry Wine Bottle Storage Panel Questions

Selecting This Omega National Wine Rack For Projects

Choosing the Omega National cherry wine bottle storage panel L3020CUF2 gives you a defined 23 inch by 42 inch unfinished cherry lattice with 27 openings, built from standard 3/4 inch wide by 7/16 inch thick moldings. That combination of known dimensions, unfinished cherry material, and glue plus mechanical joints supports predictable layout, cutting, and integration into kitchen or bath cabinet runs. For projects that call for integrated wine bottle storage using a square 3-3/4 inch by 3-3/4 inch opening pattern, this panel provides a ready-made field that can be sized to fit individual cabinet designs.