Omega National Red Oak Wine Bottle Storage x 23"W x 42"H, 27 Openings Unfinished - L3020OUF2
Description
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPL3020OUF2 to RSL3020OUF2.
Omega National Red Oak Wine Rack Storage Panel
Omega National red oak wine rack is a square wine bottle storage panel designed for cabinet and millwork applications where you need organized bottle layout inside a 23 inch by 42 inch opening. The panel is produced from standard moldings that are 3/4 inch wide by 7/16 inch thick, so you get a consistent grid profile that aligns cleanly in custom cabinetry or built-ins. All joints are glue and mechanically fastened, which locks the lattice together and keeps the rack stable while you handle, cut, and install it. Each panel sheet measures 23 inches wide by 42 inches high, giving you a full-size section sized for many wall and tall cabinet layouts. The bottle openings are 3-3/4 inches by 3-3/4 inches, so bottles sit in defined square pockets that keep them separated and easy to grab. The panel is unfinished red oak, allowing you to stain or finish it to match surrounding casework.
Key Wine Rack Details For Cabinet Projects
- The panel sheets measure 23 inches by 42 inches, which fits many standard cabinet interior spaces and gives a predictable starting size for shop layout and cutting diagrams.
- Bottle openings are 3-3/4 inches by 3-3/4 inches, so each bottle rests in its own square cell and stays spaced for hand access and label visibility in a cabinet or niche.
- All joints are glue and mechanically fastened, creating a rigid grid that stays square while you transport, crosscut, or fit the rack into custom cabinet openings on site.
- Molded members are 3/4 inch wide by 7/16 inch thick with square edges, which presents a uniform face, simplifies sanding and finishing, and helps the rack sit flush in framed openings.
- The panel is unfinished red oak, allowing you to apply your own stain or clear finish so the wine storage matches surrounding red oak doors, face frames, and trim.
- The design provides 27 openings, giving a clear bottle count per panel so you can plan total storage capacity when laying out multiple sections in a run.
Installation-Focused 23 x 42 Wine Rack Design
The 23 inch by 42 inch panel size gives installers a predictable starting blank that can be laid out against cabinet interiors before trimming. The rack is easily cut to desired size, so you can rip or crosscut the lattice to fit custom openings or staggered layouts without redesigning the grid pattern. All joints being glue and mechanically fastened keeps the assembly intact while cutting, reducing movement at intersections as the saw passes through. The 3/4 inch wide by 7/16 inch thick members with square edges sit cleanly against cabinet sides or applied cleats, which simplifies aligning the rack with face frames or door reveals. With standard 3-3/4 inch by 3-3/4 inch openings, the grid stays consistent even when trimmed, so the visual pattern remains uniform across multiple cabinet bays.
Using This Red Oak Wine Rack In Cabinet Work
Where This Unfinished Wine Rack Panel Fits Best
This red oak wine bottle storage panel is suited to kitchen and bath cabinet projects where wine bottle racks are part of the cabinet interior or open display. The 23 inch by 42 inch sheet works well in tall pantry cabinets, wall cabinets with wine sections, or built-in niches that can accept a rectangular lattice. Because the rack is easily cut to desired size, shop crews can adapt a single panel to several cabinet openings on the same job, trimming height or width to follow design drawings. The 27 bottle openings let you calculate total capacity in advance by multiplying panels used, which simplifies planning for bar walls or wine alcoves. The use of standard moldings for the grid keeps sight lines consistent from cabinet to cabinet when multiple panels are installed in a run.
Details That Support Clean Layouts And Repeatable Results
The Omega National red oak wine rack uses moldings that are 3/4 inch wide by 7/16 inch thick with square edges, which helps the rack register smoothly against casework and reduces gaps at frame intersections. All joints are glue and mechanically fastened, creating a lattice that stays square and resists racking as you slide it into place, improving fit in tight openings. The 3-3/4 inch by 3-3/4 inch bottle openings give a uniform grid, which keeps bottle rows visually straight and simplifies aligning the pattern with door rails or cabinet dividers. The panel being unfinished red oak lets finishers treat the rack at the same time as doors, frames, and trim, promoting color match across the entire installation. The 23 inch by 42 inch dimensions align with many cabinet interiors, so installers can repeat cuts from one job to the next and maintain a familiar workflow when sizing panels.
Common Questions About This Wine Rack Panel
What are the overall dimensions of the Omega National red oak wine rack?
The Omega National red oak wine rack panel measures 23 inches by 42 inches, giving a tall rectangular grid that suits many cabinet interiors and provides predictable layout dimensions.
How many bottle openings does this wine bottle storage panel have?
The wine bottle storage panel provides 27 openings, so you can plan bottle capacity per section and scale up by adding panels across multiple cabinets or niches.
What size are the individual wine bottle openings?
The individual bottle openings are 3-3/4 inches by 3-3/4 inches, forming square cells that separate bottles and create an even grid pattern for storage and display.
Can the 23 x 42 wine rack panel be cut to fit smaller openings?
The wine rack panel is easily cut to desired size, allowing installers or shop crews to trim height or width to match specific cabinet or wall openings.
How are the joints in this square wine bottle storage grid constructed?
The joints in the storage grid are glue and mechanically fastened, which creates a rigid assembly that stays together during handling, cutting, and installation.
What material and finish state is this wine rack supplied in?
The rack is unfinished red oak, so it can be stained or clear-coated to coordinate with red oak cabinets, face frames, or trim in the same project.
Selecting This Rack For Your Next Cabinet Run
This unfinished red oak wine bottle storage panel from Omega National Products combines a 23 inch by 42 inch sheet size with 27 openings and 3-3/4 inch square cells, giving you defined capacity and a repeatable layout. Glue and mechanically fastened joints support cutting and fitting work, while 3/4 inch wide by 7/16 inch thick square-edged members sit cleanly inside cabinet interiors. For projects needing red oak wine storage that can be trimmed to size, this panel provides a ready-made lattice that drops into cabinet or niche designs with predictable results.
