NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPL3020MUF2 to RSL3020MUF2.

Omega National Maple Wine Bottle Storage Panel Use

Omega National maple wine bottle storage gives you a square-grid bottle rack panel built from unfinished maple for custom cabinet and wine storage projects. The panel belongs to the Wine Bottle and Stemware Storage product class, so it is designed specifically for holding wine bottles as part of a cabinet or similar installation. Bottle openings are 3-3/4 x 3-3/4, which creates consistent square cells that position each bottle in its own space. That fixed opening size supports repeatable layouts across multiple panels, so rows and columns align cleanly when you build wider or taller racks. Panel sheets measure 23 x 42, providing a tall rectangular field that fits common upper cabinet and wall space proportions. The maple material arrives unfinished, which lets you sand and finish it to match surrounding cabinetry or trim for a uniform jobsite appearance.

Key Maple Wine Rack Details For Projects

• The product is labeled as Omega National maple wine bottle storage, which identifies it as a purpose-made wine bottle rack component and helps match it to other Omega National Products parts in a project.
• The panel is part of the Wine Bottle and Stemware Storage category, so it is intended for cabinet and wine storage layouts where bottles need organized, visible positions in a fixed grid.
• All joints are glue and mechanically fastened, creating rigid intersections in the lattice so the panel stays square during handling, cutting, and installation in a cabinet opening or framed niche.
• Panels are produced from standard moldings 3/4 wide x 7/16 thick with square edges, which gives each grid bar a consistent profile for tight joints and straight sightlines in the finished rack.
• The unfinished maple species used for the panel lets you apply your own stain, clear coat, or paint system so the rack color and sheen align with doors, frames, and surrounding millwork.
• Panel sheets measure 23 x 42, giving a known starting size that can be laid out against cabinet dimensions and trimmed where needed without guessing usable area.

Wine Rack Panel Size And Cutting Workflow

Panel sheets measure 23 x 42, so installers can plan cabinet or wall openings around a predictable rectangle before any trimming. Bottle openings are 3-3/4 x 3-3/4, which means the grid repeats at a known pitch, simplifying layout marks when you need to center the pattern in a face frame or between side panels. The panel is easily cut to desired size, so it can be ripped or crosscut to fit custom widths and heights while still using the same core product. Panels are produced from standard moldings 3/4 wide x 7/16 thick with square edges, giving clean, straight material through the cut line for smooth edges and a tight visual fit against cabinet parts.

Maple Wine Bottle Rack In Cabinet Projects

Where This Maple Wine Bottle Storage Panel Fits

The Omega National maple wine bottle storage panel is described as a wine bottle storage component, so it is suited to cabinet and wine rack installations where bottles are stored horizontally in open cells. Panel sheets measure 23 x 42, which corresponds well to tall upper cabinets, end panels, or dedicated wine cabinets that use a rectangular opening. Bottle openings are 3-3/4 x 3-3/4, giving 27 openings that create a balanced visual grid when framed in a cabinet face or placed between uprights. The product is part of the Wine Bottle and Stemware Storage category, positioning it for kitchen, bar, or pantry cabinetry where organized bottle access is important. The unfinished maple material lets the panel integrate into maple cabinet runs by taking the same stains and clears, helping the wine area read as part of the original build.

Why These Wine Rack Details Support Clean Results

All joints are glue and mechanically fastened, so the grid intersections hold firm as you handle and cut the panel, which supports straight alignment when you fit it into a cabinet opening. Panels are produced from standard moldings 3/4 wide x 7/16 thick with square edges, and that consistent section size keeps each intersecting bar flush, giving a flat rack face that seats neatly against face frames or stops. Bottle openings are 3-3/4 x 3-3/4, so each cell stays large enough for typical wine bottle bodies while still packing 27 openings into the 23 x 42 sheet, which helps you provide good storage density in limited cabinet space. The panel is easily cut to desired size, so a single stock piece can be adapted across different cabinet widths and heights, reducing part variety on the job. The unfinished maple surface accepts finishing systems used on maple cabinets, so you can deliver a continuous color run from doors to wine grid without visual breaks.

Common Questions About This Maple Wine Storage Panel

Selecting This Maple Wine Rack Panel For Your Job

The Omega National maple wine bottle storage panel combines a 23 x 42 sheet size with 27 openings at 3-3/4 x 3-3/4, giving you a predictable grid to design into kitchen, bar, or pantry cabinets. All joints are glue and mechanically fastened and the grid is built from standard moldings 3/4 wide x 7/16 thick with square edges, so the panel handles and trims like other cabinet components while staying rigid. The unfinished maple construction means you can finish the rack to match surrounding maple work, tying the wine storage neatly into your overall layout.