NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPL3020QUF2 to RSL3020QUF2.

Omega National Alder Wine Bottle Storage Panel

Omega National alder wine bottle storage gives you a square-grid panel designed to organize wine bottles in cabinetry and built-ins. The 23 inch by 42 inch panel size sets a consistent layout, so you can design a predictable opening for wine storage bays in kitchen or bar projects. Because the panel is unfinished alder, it can be sanded and finished to match surrounding casework, helping maintain a unified look across doors, face frames, and trim. All joints are both glue and mechanically fastened, creating a rigid lattice that holds its shape during handling and installation. This construction supports accurate alignment of the 27 bottle openings, so bottles sit in a repeatable pattern from row to row. The square-edge moldings define clean, straight bottle cells that suit contemporary or traditional cabinet styles.

Key Wine Rack Details That Support Your Build

• The panel offers 27 bottle openings, giving you a defined bottle capacity that helps you plan cabinet interior width and height around a known storage count for each section.
• Bottle openings are 3-3/4 inches by 3-3/4 inches, so each cell has a repeatable square size that guides you when sizing surrounding cabinet boxes and face openings.
• Panels measure 23 inches by 42 inches, providing a full sheet dimension that can be laid out against standard cabinet heights and widths to minimize layout guesswork.
• Panels are produced from standard moldings 3/4 inch wide by 7/16 inch thick with square edges, giving the grid consistent bar width for a uniform visual pattern.
• The wine bottle storage panel is easily cut to desired size, so you can trim width or height to fit custom cabinet openings or integrate it into existing casework dimensions.
• The product is unfinished alder, allowing you to apply stain, clear coat, or paint systems that match other alder components used in the same project run.

Installation Fit And On-Site Trimming Considerations

The 23 inch by 42 inch panel size lets you design cabinet interiors around a standard wine storage module, then trim as needed at installation. Because the panel is easily cut to desired size, it can be ripped or crosscut to match non-standard cabinet widths or lower toe-kick heights, keeping field adjustments straightforward. The 3/4 inch wide by 7/16 inch thick moldings create slender grid members, so the panel can sit behind face frames without consuming excessive depth. Bottle openings at 3-3/4 inches by 3-3/4 inches stay consistent across the panel, so even after trimming the perimeter, remaining openings maintain their original size for predictable bottle fit.

Using This Wine Bottle Rack In Cabinet Projects

Where This Wine Bottle Storage Panel Fits Best

This unfinished alder wine bottle storage panel fits naturally in kitchen and bath cabinet projects where coordinated wood species is important. As part of the wine bottle and stemware storage category, it is aimed at integrating bottle organization inside upper cabinets, tall pantry runs, or built-in bar sections. The 23 inch by 42 inch sheet dimension aligns well with common cabinet modules, so it can be planned as a full-height grid in a tall cabinet or split to service two shorter compartments. Because panels are produced from standard moldings with square edges, the visual grid works alongside square-profile face frames, rails, and stiles common in many cabinet lines. The 27 openings give each panel a clear bottle count, helping you position one or more panels to meet storage targets in larger projects.

Why The Panel Design Supports Consistent Results

The Omega National wine bottle storage grid uses moldings that are 3/4 inch wide by 7/16 inch thick, creating narrow but stable dividers that keep bottles separated without adding unnecessary bulk. All joints are glue and mechanically fastened, so the lattice is fixed when it arrives and does not rely on on-site assembly for rigidity, which supports straightforward handling and fitting. Bottle openings measuring 3-3/4 inches by 3-3/4 inches are arranged into 27 cells, so each opening follows the same geometry, making layout for face frame cutouts and door clearances more predictable. The unfinished alder construction lets finish operations bring the panel into the same color and sheen system as surrounding cabinetry, helping the wine storage read as part of the built-in rather than an add-on. Because the panel can be easily cut to the desired size, offcuts from one cabinet can often be used in another smaller opening, supporting efficient material use during shop or on-site fabrication.

Common Questions About Omega National Wine Storage

Selecting This Panel For Wine Bottle Storage Runs

The Omega National alder wine bottle storage panel provides a 23 inch by 42 inch unfinished alder grid with 27 openings, ready to integrate into cabinet and wine storage layouts. With 3-3/4 inch by 3-3/4 inch openings formed from 3/4 inch by 7/16 inch square-edge moldings, it delivers a consistent pattern that supports precise cabinet design. The easily cut panel format helps align wine storage with real project dimensions, so you can specify this unit where square-grid bottle organization and alder species coordination are required.