Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Deltana free swinging full mortise hinge provides a semi-concealed hinge solution for cabinet work where a clean look and controlled swing are needed, giving installers a dependable way to hang doors in a familiar mortised format. This hinge is identified as a full mortise mounting type, so the leaf seats into a routed or chiseled pocket in the cabinet and door, helping the door register in the same position every time. Its solid brass cabinet hinge construction ties the moving parts into a single brass build, which supports a consistent feel when the door is opened and closed over time. The antique brass finish defines the visual tone of the hinge, so cabinet projects that call for an antique brass appearance can keep metalwork visually aligned across doors and frames without mixing finishes.
The 2-1/2 x 1-11/16 inch hinge size lays out a compact pattern that seats comfortably on most cabinet doors and face frames, which matters when spacing multiple hinges along slender stiles. With a thickness of .093 inch, the hinge leaf calls for a mortise cut to that depth, giving the door edge and frame a flush meeting point once the hinge is seated. The full mortise mounting type means both leaves sit into the wood, so layout lines translate directly into where the knuckle lands along the gap. Square corners on the hinge tell the installer that the recess should match that squared profile, which suits jigs or hand tools set up for non-radius pockets. The listed #7 x 3/4 inch wood screws provide a fastening length that respects typical cabinet stock, helping the hinge hold without overrunning the back face of common door and frame thicknesses.
This semi-concealed hinge sits in the hinges category for semi-concealed face-frame hinges, so it is oriented toward cabinet work where a portion of the hinge is hidden within the mortise while the knuckle presents at the edge. The full mortise mounting type positions both leaves within the door and frame material, making it well suited to cabinet doors where a mortised hinge is preferred over surface mounting. Its 2-1/2 x 1-11/16 inch footprint fits applications needing a relatively small but substantial hinge, such as smaller cabinet doors or lighter built-in fronts. The antique brass finish targets projects where the visible metal needs to coordinate with antique brass hardware throughout a room, so the hinge color does not conflict with other fittings.
The .093 inch hinge thickness gives a clear mortise depth target, helping one setup work across repeated doors so hinge leaves sit level with the wood surfaces. Square corners on the hinge standardize the pocket layout, letting jigs or templates cut crisp corners that match the leaf outline for consistent door gaps. The free swinging operation lets the door move through its swing without added spring force from the hinge, which can simplify alignment when checking reveals because the door hangs on its own weight. Solid brass cabinet hinge construction gives the moving parts a uniform material interface, supporting a consistent feel each time doors are opened across a bank of cabinets. The specified #7 x 3/4 inch wood screws support a fastening pattern tuned to typical cabinet thickness, helping screws hold firmly so repeated use does not work the hinge loose in normal wood cabinetry.
This Deltana free swinging full mortise hinge uses a full mortise mounting type, so both leaves sit in recessed pockets in the door and frame for a flush, semi-concealed installation.
The CH2517U5 hinge is described as 2-1/2 x 1-11/16 inches, setting the leaf size and helping plan hinge placement on cabinet doors and face frames.
This hinge is described as a solid brass cabinet hinge, so the leaves and knuckle use brass construction for consistent feel and finish across the hardware.
The hinge thickness is listed as .093 inch, which guides how deep the mortise should be cut so the leaves sit flush with the door and frame surfaces.
This hinge is specified with #7 x 3/4 inch wood screws, so the fastener length and gauge match typical cabinet door and frame stock for a secure hold.
The CH2517U5 hinge uses an antique brass finish, helping cabinet projects match other antique brass hardware for a consistent appearance across doors and frames.
This Deltana free swinging full mortise hinge brings solid brass cabinet construction, an antique brass finish, and a defined 2-1/2 x 1-11/16 inch footprint, giving installers a clear specification for mortised cabinet doors. With .093 inch thick leaves, square corners, and #7 x 3/4 inch wood screw sizing, it offers a straightforward path from layout to installation on semi-concealed face-frame hinge projects where a full mortise hinge format is preferred.