Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so this hinge works as both a functional joint and a finished detail on cabinet doors where the hardware stays visible. The mounting type is full mortise, which sets the leaves into the door and frame for a cleaner sightline and more controlled movement. Square corners on the hinge match square mortises, so routing or mortising can stay straightforward for repeatable results across a run of doors. A hinge size of 2 inch by 1.7 inch keeps this model suited to cabinet-scale doors, helping installers match hinge size to smaller stiles and rails. Because the hinge is part of Deltana solid brass cabinet hinges, it aligns with projects that call for brass construction and consistent finish options.
The mounting type is full mortise, which means both hinge leaves recess into the cabinet door edge and the cabinet frame, controlling reveal and gap by the depth of the mortise. Square corners let a straight-chisel or square-template approach work without rounding, saving a step when fitting each hinge. The 2 inch by 1.7 inch size defines how much edge length the hinge occupies, helping layout spacing from the door ends on cabinet-scale doors. With six holes in the hinge, the screw pattern distributes holding power, which supports stable alignment after the door is hung and adjusted within the constraints of the mortise.
The product class is semi-concealed hinges, so part of the hinge is visible while part is set into the cabinet, suiting applications where a finished hinge detail is acceptable on the face. As a full mortise design, this hinge works on cabinet doors and frames prepared with matching mortises, pairing best with cabinet constructions that allow material to be removed at the door edge and frame. The hinge size of 2 inch by 1.7 inch matches smaller cabinet doors where compact hardware is preferred, giving proportional hardware to narrow rails or stiles. Being part of Deltana solid brass cabinet hinges, this hinge aligns with cabinet work that calls for brass material and a coordinated family of fine finishes across a project. The oil rubbed bronze finish referenced in the description supports designs that call for darker, traditional-toned visible hinge elements on cabinet doors.
The mounting type full mortise, combined with square corners, means once a mortise template is dialed in, hinge pockets can be duplicated door after door with consistent seat and reveal. A hinge thickness of .093 inch provides a clear target depth when routing or chiseling mortises, which supports even door gaps along the hinge side. Six holes in the hinge offer multiple screw positions, helping the hinge leaf stay flat to the mortise face and resist twisting during normal opening and closing. The specified wood screw size #7 x 3/4 inch ties the hardware to common cabinet stock thicknesses, so the fasteners engage material appropriately for this hinge format. The manufacturer part number CH2517U10B identifies this exact oil rubbed bronze model, which helps keep replacements or additional hinges consistent on future work.
The hinge is described as a solid brass cabinet hinge with full mortise mounting, so it suits cabinet doors and frames prepared with matching mortises where a semi-concealed hinge is desired.
The hinge thickness of .093 inch defines the mortise depth, so routing or chiseling to that depth helps the leaves sit flush and supports even door gaps along the hinge side.
Square corners match square mortises, allowing straight-edged templates or chisels to be used and reducing extra rounding work during cabinet hinge installation.
The hinge size of 2 inch by 1.7 inch indicates a compact cabinet-scale hinge, guiding use on smaller cabinet doors where proportional hardware is preferred.
The hinge has six holes, which spread the screw pattern across the leaf so load is shared, supporting stable alignment under normal cabinet door operation.
The specified wood screw size #7 x 3/4 inch matches typical cabinet stock thickness for this hinge format, helping the hinge fasten securely into doors and frames.
This Deltana full mortise cabinet hinge is a solid brass cabinet hinge with an oil rubbed bronze finish and ball tip finials as standard, suited to cabinet work where the hinge detail remains part of the finished look. With its 2 inch by 1.7 inch size, .093 inch thickness, square corners, and six-hole layout using #7 x 3/4 inch wood screws, it supports consistent mortising depth, stable fastening, and repeatable cabinet door alignment across a project. For jobs that match these dimensions and a semi-concealed full mortise approach, this hinge offers a specific, clearly defined option.