Deltana solid brass cabinet hinges serve as full mortise hinges for cabinet doors, so they let the door leaf sit neatly into a routed pocket and keep the hinge leaves flush with the cabinet and door edges. These hinges are part of the semi-concealed hinges class, which means only the barrel and finials show, leaving the cabinet face clean while still giving clear pivot support. The hinge size of 2 by 1.7 inches suits smaller cabinet doors where compact hardware keeps the layout proportional and controlled. Ball tip finials are standard on these hinges, so the barrel ends present a finished decorative point instead of a blunt pin, which matters when the hinge knuckle is visible on higher-end cabinetry. Solid brass construction supports a substantial feel at the pivot point, which helps cabinet doors move smoothly during everyday use.
The full mortise mounting design sets both hinge leaves into the cabinet door and frame, so installers work from a known leaf thickness of .093 inch when routing the pockets. This helps keep the door edge flush with the frame, reducing the need for after-the-fact shimming. Square corners on the hinge work with straight-edged mortises, which suits table-sawn jigs and router templates that stop cleanly at each corner. Six hinge screw holes per hinge give clear locations for #7 x 3/4 inch wood screws, which ties the leaf securely into the substrate so doors cycle without loosening at the stile. The hinge size of 2 by 1.7 inches keeps the hardware compact, which is useful when fitting smaller cabinet doors where stile width and rail height limit hardware footprint.
This Deltana solid brass cabinet hinge is designed as a full mortise hinge for cabinet doors, so it fits applications where the door and frame both receive machined pockets. The 2 by 1.7 inch format suits cabinet and furniture doors that use narrower stiles, where a smaller hinge avoids crowding the edge while still giving a defined pivot point. Being part of the semi-concealed hinge class, it keeps most of the leaf hidden once installed, so only the barrel and ball tip finials show along the edge of the door. This makes it suitable for cabinetry where the door face stays visually clean but the exposed barrel still needs a finished look. Deltana solid brass cabinet hinges work in projects where solid brass material is preferred at the hinge line for a traditional cabinet hardware choice.
The hinge thickness of .093 inch gives installers a precise value when routing mortises, which helps repeat the same pocket depth from door to door and keeps reveals consistent along a run of cabinets. Full mortise mounting ties both leaves into the wood, so the pivot center stays fixed relative to the door edge, which helps doors close to the same line across multiple openings. The six-hole hinge pattern provides several screw positions, allowing #7 x 3/4 inch wood screws to hold across more of the stile, which helps resist racking forces when doors are opened at the edge. Square corners on the hinge let installers cut pockets with straight stops, so jigs can be reused with predictable corner layout on multiple cabinets. Ball tip finials as standard keep the hinge barrel visually consistent, which matters when lining up several doors where the hinge knuckles remain visible.
The CH2517CR003 is a Deltana solid brass cabinet hinge in the semi-concealed hinge class, so it functions as a full mortise hinge where most of the leaf is hidden in routed pockets.
This hinge uses a full mortise mounting type with square corners and six hinge holes, so it installs into routed recesses and fastens with multiple points for stable cabinet door support.
The hinge is identified as 2 by 1.7 inches, so it fits smaller cabinet doors where a compact hinge footprint aligns with narrow stiles or furniture-scale casework.
This product is a Deltana solid brass cabinet hinge with a PVD polished brass description, so it provides solid brass construction with a polished brass appearance on visible hinge surfaces.
The hinge uses #7 x 3/4 inch wood screws, so fasteners of that size match the hinge holes and engage typical cabinet materials at an appropriate depth.
Ball tip finials are standard on this hinge, so the ends of the hinge barrel present a rounded decorative detail suited to traditional cabinet and furniture door designs.
The Deltana solid brass cabinet hinges identified as CH2517CR003 combine full mortise mounting, square corners, and ball tip finials, so they support projects that need a compact, traditional hinge at a 2 by 1.7 inch format. The .093 inch leaf thickness and six-hole pattern give clear routing and fastening details for repeatable cabinet door installation. For work that calls for a PVD polished brass look on visible hinge barrels with semi-concealed leaves, this solid brass full mortise hinge provides a defined hardware choice ready to drop into routed cabinet and furniture door layouts.