
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
12 inch Stealth Speed Brace is a Fastcap workstation and countertop bracket designed to support countertop and bar overhangs with no visible kicker or corbels, which keeps front faces clean on kitchen, bar, or shop runs. The primed finish on this Stealth Speed Brace arrives ready for topcoat, so it ties into surrounding colors without extra prep time on site. Each brace will support 300 - 500 pounds, giving solid backing under stone, solid surface, or heavy worktops where load capacity is critical. The powder coated steel construction resists wear around busy counters, so the brace stays protected once buried under tops and substrates. This 12 inch Stealth Speed Brace uses countersunk screw holes, so fastener heads sit flush and let substrates lay flat over the bracket.
The web description notes that installers simply route a 3-1/2 inch slot in the substrate and mount the Stealth Speed Brace, which streamlines layout because the routed pocket defines the brace path. That routed 3-1/2 inch slot gives the 12 inch brace a recessed channel, so the top material can sit level over the bracket while still gaining full steel support. The countersunk screw holes in the brace align with this routed path, which keeps fastener heads out of the way so the substrate bears evenly on the face of the steel. As part of Fastcap workstation and countertop brackets, this 12 inch brace fits into standard cabinet and wall framing layouts where routing a continuous slot is practical.
This 12 inch Stealth Speed Brace from Fastcap is described for supporting countertop and bar overhangs, so it fits common kitchen peninsulas, reception counters, or shop benches that extend past cabinets. Being part of a workstation and countertop brackets class, the brace suits layouts where work surfaces need clear knee space under the overhang without corbels. The ability of each brace to support 300 - 500 pounds means it can sit under stone or other dense tops where live loads and material weight combine. Because this Stealth Speed Brace creates support with no visible kicker or corbels, front faces on islands, bars, and wall-mounted tops stay open for clean design lines and uninterrupted legroom.
The primed finish on the Stealth Speed Brace helps installation results because the brace can be painted to match or complement framing and substrate colors, reducing visual distraction where any edge might be visible. Powder coated steel construction gives the 12 inch Stealth Speed Brace a sealed surface, which helps protect the steel once it is locked behind substrate and countertop layers during the life of the installation. The use of countersunk screw holes promotes tight contact between the brace and routed substrate, which helps prevent high spots under tops and supports smooth seams at the front edge. The described 3-1/2 inch routed slot method creates a repeatable mounting routine, so multiple braces line up in the same plane and share overhang loads more evenly across a run.
The 12 inch Stealth Speed Brace supports countertop and bar overhangs with no visible kicker or corbels, which keeps leg space clear while still carrying significant overhang loads.
Each brace will support 300 - 500 pounds, so a series of braces can back up heavy countertops, bars, or work surfaces where high live loads are expected.
The web description explains that installers simply route a 3-1/2 inch slot in the substrate and mount the brace, creating a recessed channel that keeps the top level.
The brace uses countersunk screw holes so flat-head screws sit flush, allowing the substrate to sit tight on the steel without rocking or telegraphing fastener heads.
The brace is made from powder coated steel with a primed finish, giving a tough coated surface that can be painted to coordinate with surrounding construction.
As a workstation and countertop bracket, this 12 inch Stealth Speed Brace fits layouts where countertops, bars, or benches extend past cabinets and need unobstructed knee space.
The 12 inch Stealth Speed Brace from Fastcap offers a primed, powder coated steel solution for supporting countertop and bar overhangs without front corbels, which helps keep designs clean. With each brace rated for 300 - 500 pounds, installers can match brace spacing to anticipated loads for residential or light commercial work. The routed 3-1/2 inch slot mounting method and countersunk screw holes give a straightforward install path that keeps tops flat over the brace. For projects needing concealed support using workstation and countertop brackets, this Stealth Speed Brace aligns with typical cabinet and substrate construction.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FASTEALTH-12BL Mfr# SB-12 STEALTH BL | SpeedBrace Stealth/Counter Top Support, 12" Black | ||||
Sold in: 1 Each | FASTEALTH-12WH Mfr# SB-12 STEALTH WH | 12" Stealth Speed BraceSupport, White Finish | ||||
Sold in: 1 Each | FASTEALTH-16BL Mfr# SB-16 STEALTH BL | 16" Stealth Brace, Black Finish, FastCap, SB-16 STEALTH BL | ||||
Sold in: 1 Each | FASTEALTH-16PRIMED Mfr# SB-16 STEALTH PRIMED | SpeedBrace Stealth/Counter Top Support, 16" Primed | ||||
Sold in: 1 Each | FASTEALTH-24BL Mfr# SB-24 STEALTH BL | SpeedBrace Stealth/Counter Top Support, 24" Black | ||||
Sold in: 1 Each | FASTEALTH-24PRIMED Mfr# SB-24 STEALTH PRIMED | 24" Stealth Speed Brace, Primed Finish | ||||
Sold in: 1 Each | FASTEALTH-30BL Mfr# SB-30 STEALTH BL | 30" Stealth SpeedBrace, 3/4" x 3/4", Black | ||||
Sold in: 1 Each | FASTEALTH-30PRIMED Mfr# SB-30 STEALTH PRIMED | 30" Stealth SpeedBrace, 3/4" x 3/4", Primed | ||||
Sold in: 1 Each | FASTEALTHHD12BL Mfr# SB-12 HD STEALTH BL | 12" Stealth SpeedBrace, Black | ||||
Sold in: 1 Each | FASTEALTHHD12PRIME Mfr# SB-12 HD STEALTH PRI | 12" Stealth SpeedBrace, Primed |