
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
16 inch Stealth Brace is a workstation and countertop bracket designed to support countertop and bar overhangs while staying out of sight. The brace sits inside a routed pocket in the substrate, so the overhang presents clean lines without bulky corbels or a visible kicker that can interfere with knees or workflow. The brace is made by Fastcap as part of their Stealth Speed Brace line, giving installers a consistent format across projects where hidden support is required. A black finish helps the brace disappear in shadow lines under tops, which keeps the focus on the surface material instead of the support hardware in typical bar, island, or workstation layouts.
The Stealth Speed Brace mounts into a routed pocket, using a 3-1/2 inch slot in the substrate as its primary interface. That slot defines the brace position, which simplifies layout when repeating brackets along a bar or counter run. With countersunk screw holes, the brace locks to the substrate using flat-head fasteners that pull the steel tight against the routed surface, which helps keep the top plane consistent. This installation approach lets fabricators prepare the substrate on the bench with routing and hole locations handled before moving to the jobsite, supporting faster field installation when setting the finished top into place.
The Fastcap Stealth Speed Brace, SB-16 STEALTH BL, is intended to support countertop and bar overhangs while remaining concealed. The 16 inch format suits many bar tops and workstation counters where a modest projection needs structural help. By routing a 3-1/2 inch slot in the substrate, installers sink the horizontal leg of the brace into the build-up, so the countertop edge remains visually clean. Powder coated steel gives the support arm the rigidity to work under 300 to 500 pound loading, which is important when users lean on a bar edge or when heavy equipment sits near the outer zone of a work surface. The black finish is particularly useful under dark tops or shadowed cabinets, where the steel recedes visually above toe space and seating areas.
The Stealth Speed Brace uses countersunk screw holes so each screw head draws into the steel profile, helping the brace sit flat against the substrate without high spots. That flat seating supports a consistent top plane along a run of brackets, which matters when setting stone, solid surface, or laminated tops that demand even bearing. The 3-1/2 inch slot routing requirement standardizes the interface across every bracket position, so fabricators can template and machine multiple substrates with the same pattern and rely on predictable fit on site. With a rated capacity of 300 to 500 pounds per brace, designers can calculate bracket spacing to match loading expectations, which simplifies planning for bar seating zones and high-use work areas. As a workstation and countertop bracket from Fastcap, this brace fits naturally into installations where hidden structural support must integrate with cabinetry and support framing without adding visible obstructions under the overhang.
The 16 inch Stealth Brace supports countertop and bar overhangs, so tops gain structural backing at the edge while keeping supports hidden for a cleaner look and better legroom beneath.
Each Fastcap Stealth Speed Brace is specified to support 300 to 500 pounds, so installers can plan bracket spacing around the expected loading on bar and countertop overhangs.
The Stealth Speed Brace mounts into a routed 3-1/2 inch slot in the substrate, so the brace sits recessed and hidden while transferring load from the countertop overhang back to structural framing.
The brace uses countersunk screw holes so flat-head fasteners sit flush to the steel, allowing the brace to seat tightly in the routed pocket and maintain a flat bearing surface for the top.
The Stealth Brace is made from powder coated steel with a black finish, giving it rigid support strength and a low-visibility appearance in the shadows beneath countertops and bars.
The 30 inch Stealth Speed Brace style is designed to mount to the side of a cabinet panel, which supports longer runs where side mounting to cabinetry is preferred.
The Fastcap 16 inch Stealth Speed Brace, SB-16 STEALTH BL, from Wurth Baer Supply supports countertop and bar overhangs with powder coated steel strength and a discreet black finish. With a 300 to 500 pound rating, routed 3-1/2 inch slot interface, and countersunk screw holes, it fits directly into workstation and countertop bracket layouts where hidden support is a priority. Use this brace when planning bar seating or work surfaces that need solid, concealed structural backing and a clean underside appearance.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FASTEALTH-12BL Mfr# SB-12 STEALTH BL | SpeedBrace Stealth/Counter Top Support, 12" Black | ||||
Sold in: 1 Each | FASTEALTH-12PRIMED Mfr# SB-12 STEALTH PRIMED | 12" Stealth Speed BraceSupport, Primed Finish | ||||
Sold in: 1 Each | FASTEALTH-12WH Mfr# SB-12 STEALTH WH | 12" Stealth Speed BraceSupport, White Finish | ||||
Sold in: 1 Each | FASTEALTH-16PRIMED Mfr# SB-16 STEALTH PRIMED | SpeedBrace Stealth/Counter Top Support, 16" Primed | ||||
Sold in: 1 Each | FASTEALTH-24BL Mfr# SB-24 STEALTH BL | SpeedBrace Stealth/Counter Top Support, 24" Black | ||||
Sold in: 1 Each | FASTEALTH-24PRIMED Mfr# SB-24 STEALTH PRIMED | 24" Stealth Speed Brace, Primed Finish | ||||
Sold in: 1 Each | FASTEALTH-30BL Mfr# SB-30 STEALTH BL | 30" Stealth SpeedBrace, 3/4" x 3/4", Black | ||||
Sold in: 1 Each | FASTEALTH-30PRIMED Mfr# SB-30 STEALTH PRIMED | 30" Stealth SpeedBrace, 3/4" x 3/4", Primed | ||||
Sold in: 1 Each | FASTEALTHHD12BL Mfr# SB-12 HD STEALTH BL | 12" Stealth SpeedBrace, Black | ||||
Sold in: 1 Each | FASTEALTHHD12PRIME Mfr# SB-12 HD STEALTH PRI | 12" Stealth SpeedBrace, Primed |