
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
SpeedBrace Stealth countertop support is a Fastcap steel bracket designed to carry countertop and bar overhangs while staying out of sight during everyday use. This workstation and countertop bracket sits inside a routed slot in the substrate, so the support is built into the structure instead of hanging below the edge. The 16 inch length works well where an overhang needs firm support back into framing or cabinet structure. The primed finish prepares the bracket for field painting or finishing, which helps it blend with surrounding materials. Because it is part of Fastcap's SpeedBrace family, the layout and performance are geared toward shop and jobsite workflows where predictable support matters. The design keeps floor space clear around bars and counters, giving knees and feet room while still providing substantial load capacity.
This Fastcap SpeedBrace Stealth primed support uses a routed pocket rather than a projecting corbel, so layout starts with routing a 3-1/2 inch slot in the substrate where the brace will sit. That slot gives the steel profile a precise channel, helping the 16 inch brace register consistently from bracket to bracket along a run. The countersunk screw holes then align fasteners along the brace, pulling it firmly to the substrate without proud heads that could tilt the steel out of plane. Because the bracket is part of the workstation and countertop bracket class, it is suited to mounting under countertops and bars where a clean appearance and knee clearance are important on finished installations.
This Stealth SpeedBrace, primed and 16 inches long, is designed to support countertop and bar overhangs in situations where visible kickers or large corbels are not desired. The routed 3-1/2 inch slot lets the brace sit inside the substrate, which keeps the steel hidden from view along the edge of the counter. This approach is useful on bar tops, peninsulas, or work surfaces where people sit or stand close to the edge because it preserves legroom. As a workstation and countertop bracket, it fits applications where structural support must coexist with a clean, open design around cabinets, bases, or support walls.
The powder coated steel construction on this Fastcap SpeedBrace Stealth primed 16 inch bracket provides a smooth, consistent surface that interacts predictably with routed slots and substrates, which helps installers achieve snug fits along a run of supports. The countersunk screw holes control fastener placement, helping each brace pull down evenly so the countertop bears uniformly across multiple brackets. With each brace rated to support 300 to 500 pounds, spacing and placement can be planned around expected loading on bar or counter edges. The primed finish on the steel adds a ready-to-finish surface, which helps streamline the workflow when brackets need to take paint or other finishes as part of the overall design.
The SpeedBrace Stealth 16 inch is used to support countertop and bar overhangs, providing structural backing while avoiding visible kickers or corbels along the counter edge.
Each Stealth SpeedBrace primed 16 inch brace will support 300 to 500 pounds, allowing it to handle typical countertop and bar overhang loads in many woodworking and cabinet applications.
This Fastcap countertop support uses a routed 3-1/2 inch slot in the substrate, allowing the steel brace to sit inside the material for a low-visibility, integrated installation.
The primed finish on this brace prepares the powder coated steel surface for field painting or finishing, which helps match surrounding cabinetry or wall colors during installation.
Countersunk screw holes allow fastener heads to sit below the surface of the bracket, helping the brace seat flat in the routed slot and maintain a flush fit against the substrate.
This workstation and countertop bracket suits countertop and bar overhang projects where hidden steel support is needed to keep legroom open and visual lines clean beneath the surface.
The SpeedBrace Stealth countertop support, 16 inch primed version, offers a powder coated steel bracket with routed-slot mounting for countertop and bar overhangs. With each brace rated for 300 to 500 pounds and featuring countersunk screw holes, it provides substantial hidden support while integrating smoothly into substrates. The primed finish also prepares the bracket for paint or other finishes as part of the overall project. For projects needing open legroom and clean lines under counters, this Fastcap workstation and countertop bracket is built for that role.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FASTEALTH-12BL Mfr# SB-12 STEALTH BL | SpeedBrace Stealth/Counter Top Support, 12" Black | ||||
Sold in: 1 Each | FASTEALTH-12PRIMED Mfr# SB-12 STEALTH PRIMED | 12" Stealth Speed BraceSupport, Primed Finish | ||||
Sold in: 1 Each | FASTEALTH-12WH Mfr# SB-12 STEALTH WH | 12" Stealth Speed BraceSupport, White Finish | ||||
Sold in: 1 Each | FASTEALTH-16BL Mfr# SB-16 STEALTH BL | 16" Stealth Brace, Black Finish, FastCap, SB-16 STEALTH BL | ||||
Sold in: 1 Each | FASTEALTH-24BL Mfr# SB-24 STEALTH BL | SpeedBrace Stealth/Counter Top Support, 24" Black | ||||
Sold in: 1 Each | FASTEALTH-24PRIMED Mfr# SB-24 STEALTH PRIMED | 24" Stealth Speed Brace, Primed Finish | ||||
Sold in: 1 Each | FASTEALTH-30BL Mfr# SB-30 STEALTH BL | 30" Stealth SpeedBrace, 3/4" x 3/4", Black | ||||
Sold in: 1 Each | FASTEALTH-30PRIMED Mfr# SB-30 STEALTH PRIMED | 30" Stealth SpeedBrace, 3/4" x 3/4", Primed | ||||
Sold in: 1 Each | FASTEALTHHD12BL Mfr# SB-12 HD STEALTH BL | 12" Stealth SpeedBrace, Black | ||||
Sold in: 1 Each | FASTEALTHHD12PRIME Mfr# SB-12 HD STEALTH PRI | 12" Stealth SpeedBrace, Primed |