LED 2W Warm White Puck Light, Nickel

LED 2W Warm White Puck Light For Cabinets

LED 2W warm white puck light delivers 2 watts at 12 volts, so it adds focused task or accent lighting while staying low power for typical cabinet or display runs. The warm 3000K color matches a comfortable interior tone, which helps built-ins and woodwork read naturally in finished spaces. The compact 2-1/4 inch bore hole diameter with 1/2 inch height fits tight cavity spaces, giving you flexibility in shelves, valances, or shallow soffits. A 53 degree beam spread directs light in a controlled cone, which helps you highlight working areas or products without spilling light too far beyond the target surface. The nickel finish on this Pro Value Series puck coordinates with common contemporary hardware colors, helping installations look consistent across hinges, pulls, and visible trim.

Key LED Puck Details That Support Your Layout

• The 2 watt, 12 volt LED design provides focused light while working well with low voltage cabinet lighting runs, which matters when planning driver capacity and wiring paths on multi-puck jobs.
• The 25,000 hour bulb life rating supports long service intervals, which matters when pucks are recessed into cabinetry or displays where future access is limited and labor to reopen the space is costly.
• The 2-1/4 inch bore hole diameter with 1/2 inch height fits standard recess cutouts, which matters when you are boring holes in finished cabinets and want clean, repeatable installs across a bank of doors or shelves.
• The 53 degree beam spread concentrates light into a defined area, which matters when you are aiming to light counters, display shelves, or work surfaces without washing adjacent walls or faces.
• The attached 79 inch cord on each LED puck gives you generous reach back to a driver or power supply location, which matters when routing wires through cabinets, toe-kicks, or display bases to a centralized control point.

Mounting, Power, And Dimming Setup Details

This Pro Value Series puck uses a recess mount design, so it nests into a 2-1/4 inch bore hole for a flush appearance in cabinetry or displays. Surface mount rings are offered separately, allowing you to treat this same body as a surface fixture when recess boring is not desired or possible. The puck operates on 12VDC, so it works as part of a low voltage system driven by a compatible power supply. A dimmable driver is required when you are dimming from a wall dimmer, so the puck can respond cleanly to line-voltage dimming controls in finished rooms. When you are not dimming from a wall dimmer, a dedicated power supply is required, so the LED receives stable 12VDC for normal on-off switching. The attached 79 inch cord means each puck can be home-run or daisy-routed back toward drivers or power supplies.

Using This LED Puck Light In Real Projects

Where This 12VDC 2W LED Puck Performs Well

The TXT 12VDC 2W PRO LED puck in warm white 3000K lends itself to cabinet, display, and under-shelf lighting where controlled, comfortable light is needed. The 53 degree beam spread lets you set pucks to graze a backsplash, flood a counter, or highlight a product shelf without wasting output into dead zones. The 2-1/4 inch bore requirement lines up with common boring tools, so shop teams can cut repeatable holes along runs of upper cabinets or cases. At only 1/2 inch height, the housing sits shallow in the recess, which is useful in slim cabinet tops or shallow display headers. The nickel finish pairs with many modern hinge and pull finishes, supporting visually consistent projects when pucks are directly visible. With a 25,000 hour bulb life rating, this LED design suits built-ins and casework meant for long-term installation where frequent service is disruptive.

Details That Help Repeatable Mounting And Wiring

The recess mount format lets installers plan a clean, flush look, because once the 2-1/4 inch bore hole is cut the puck seats consistently across multiple positions. Surface mount rings, available separately, turn the same light source into a surface fixture, giving flexibility where you cannot cut into substrates. Operating at 12VDC, this Pro Value Series LED puck integrates into low voltage runs tied back to either a dimmable driver or a standard power supply, depending on whether a wall dimmer is part of the control strategy. The required dimmable drivers are specified for wall-dimmer applications, so the puck output tracks room lighting controls smoothly. When dimming from the drivers is not needed, the listed power supplies provide the necessary 12VDC feed for simple on-off control. Each puck has a 79 inch cord permanently attached, giving room to route wiring around cabinet partitions, through gables, or along casework backs to centralized power points without tight stretches.

Common Questions About This Pro Value Series Puck

Select This LED Puck For Low Voltage Cabinet Runs

The Pro Value Series LED 2W warm white puck light combines 12VDC operation, 3000K output, and a compact recess mount body, so it suits low voltage cabinet and display projects needing controlled, comfortable light. With a 2-1/4 inch bore requirement, 1/2 inch height, and nickel finish, it integrates cleanly into modern casework layouts. The 25,000 hour bulb life rating and 79 inch attached cord support durable, service-friendly installations across multiple pucks on a shared driver or power supply. Use the specified dimmable driver or power supply options to align this TXT 12VDC 2W PRO LED puck with the control approach planned for your next build.