LED 3W Warm White Puck Light, Nickel

LED 3W Warm White Puck Light For Task Use

LED 3W Warm White Puck Light, Nickel delivers 3 watts at 12 volts, providing focused task lighting while drawing low power, which matters when you are wiring multiple points in a cabinet or display run. The 3000K warm white color creates a comfortable light tone that works well where you want illumination without a harsh look, helping finished wood and surfaces appear natural. The nickel finish ties into modern hardware finishes so the light blends into many cabinet and fixture designs. A 100 degree beam spread throws light broadly from each point, reducing hot spots and helping you cover more area with fewer fixtures in many layouts. This puck light is part of the Pro Value Series, aligning with common shop and project standards. The manufacturer part number L-PK3W-3NI-1 gives you an exact identifier for repeat orders and job documentation.

Key LED Puck Details That Support Your Work

• The 2-1/4 inch diameter bore hole size defines the recess opening, so casework and cabinet panels can be machined consistently before finishing.
• The 7/16 inch height keeps the fixture low profile in recess mount situations, helping maintain interior clearances in shallow cabinets.
• The 25,000 hour bulb life rating reduces how often fixtures need to be swapped, which matters once cabinetry and trim are fully installed.
• The 79 inch cord attached to each LED puck gives routing length from the light to the power components, helping when drivers are set back from the visible zone.
• The 1 year warranty provides defined support terms from the supplier, which is useful for project planning and documenting product choice.

Mounting And Power Details For This Puck Light

This Pro Value Series LED puck light offers recess mount installation, giving a flush look when set into a 2-1/4 inch bore hole and helping the fixture sit cleanly in cabinet or display panels. Surface mount rings are sold separately, and this option allows use where you prefer not to bore into material, such as on finished panels or retrofit situations. The puck operates on 12VDC at 3 watts, so it fits low-voltage lighting layouts that centralize power. A dimmable driver is required when dimming from a wall dimmer, using item RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, which sets up the light to respond to wall control wiring. A power supply SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 is required when you are not dimming from a wall dimmer, so the low-voltage puck receives the DC power it needs.

How This 12VDC 3W LED Puck Works In Practice

Where This Nickel LED Puck Light Fits Best

The 2-1/4 inch diameter bore hole specification positions this LED 3W Warm White Puck Light, Nickel well for cabinet interiors, shelves, and display panels that can accept that opening, allowing clean recess mounting. The 7/16 inch height keeps the face close to flush with surrounding material, which is helpful in cupboards or under-shelf applications where protruding fixtures could interfere with stored items. A 100 degree beam spread means the light throws broadly across work surfaces or display zones, helping to reduce dark spots between pucks in runs. The 3000K warm white output supports use where you want light that favors residential or hospitality environments, keeping the color tone comfortable over wood grains and solid surfaces. With 12VDC operation, this puck light fits into low-voltage cabinet lighting systems that centralize drivers away from view, supporting clean millwork interiors.

Why These LED Puck Details Support Repeatable Results

The 3 watt draw at 12 volts gives a clear electrical load per fixture, making it workable to calculate how many pucks can run on each SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 power supply, which helps lay out circuits without trial and error. The attached 79 inch cord gives a fixed amount of lead per light, allowing installers to plan driver and power supply locations within that reach for consistent installations across similar cabinets. Using the specified dimmable drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR sets a defined combination for dimming from a wall dimmer, which simplifies product selection when standardizing a lighting package. The 25,000 hour bulb life rating supports long-term use once cabinetry is closed up, reducing the need to access fixtures later. The 1 year warranty documented on this Pro Value Series puck gives projects a known support window, which can be important for job submittals. The manufacturer part number L-PK3W-3NI-1 lets you reorder the exact same configuration for future phases or service work.

Common Questions About This LED 3W Warm White Puck Light

Select This Puck Light For Low-Voltage Cabinet Runs

The LED 3W Warm White Puck Light, Nickel from the Pro Value Series combines 3 watt, 12VDC operation with a 3000K warm white output, so it fits low-voltage cabinet and display layouts that favor comfortable light levels. The 2-1/4 inch recess bore hole and 7/16 inch height define how it sits in your work, while the 100 degree beam spread and 79 inch cord length support flexible positioning along each run. With defined driver and power supply options plus a 25,000 hour rating and 1 year warranty, this L-PK3W-3NI-1 puck light is ready for projects that need repeatable, documented components.