LED 2W Cool White Puck Light For Task Areas

LED 2W Cool White Puck Light delivers 2 watts at 12 volts, providing focused illumination that suits cabinet, display, and task lighting where low power draw matters. The 5000K cool white color output creates a bright, neutral tone that helps reveal detail on work surfaces and in casework. The Pro Value Series branding identifies this puck as part of a consistent product family, which helps when matching look and performance across multiple locations. The 2-1/4 inch diameter bore hole size defines the cutout needed for recess installation, guiding layout and drilling during cabinet fabrication. The 1/2 inch height keeps the light compact, which helps where internal cabinet depth is limited. The nickel finish presents a clean, modern appearance that blends well with many contemporary hardware and hinge finishes in professional woodworking projects.

Key LED Puck Details That Support Projects

• 2 watts of power at 12 volts provides focused lighting while keeping electrical demand low, which helps when multiple puck locations share a single driver or power supply in a run of cabinetry.
• Bulb life rated at 25,000 hours supports long service intervals, which reduces time spent returning to finished installations to address light source replacement in built-in millwork or casework.
• The 2-1/4 inch diameter bore hole dimension defines the cut size for recess mounting, which simplifies shop templates and speeds repeatable drilling during cabinet or display production.
• 1/2 inch overall height keeps the puck shallow, which helps it fit where interior clearances are tight, such as under cabinet bottoms or in thin shelving panels.
• A 53 degree beam spread focuses light in a defined cone, which concentrates illumination on counter surfaces or display areas without washing too far beyond the target zone.
• The 79 inch cord attached to each LED puck provides reach back to a driver or power supply placement, which allows routing through cabinet backs or channels without splicing.

Recess And Surface Mounting Options For Fit

The recess mount design lets the LED 2W Cool White Puck Light sit into a 2-1/4 inch bore hole, so the face of the light stays close to the panel surface for a built-in look. The 1/2 inch height works with this recess approach to keep the fixture compact on the interior side of the panel, which matters when routing cord paths or sharing space with shelving and storage. Surface mount rings are sold separately, giving an alternate mounting method when recess boring is not part of the job or when working with materials where cutting a bore hole is not preferred. Operating at 12VDC ties this puck into low-voltage lighting layouts, which helps align with common cabinet and display lighting systems using centralized power supplies or dimmable drivers.

Using This Pro Value Series Puck In Workspaces

Where This 12VDC 2W LED Puck Works Best

The 12VDC 2W rating positions this Pro Value Series LED puck light for low-voltage cabinet, shelving, and display applications where controlled task lighting is needed. The 5000K cool white output provides a bright, neutral cast that supports detailed visual work, such as sorting hardware in cabinet interiors or highlighting product on display shelves. With a 53 degree beam spread, the light projects a defined cone, which suits applications like under-cabinet countertops where a focused pool of light is preferred over broad ambient wash. The compact 2-1/4 inch bore hole size makes it practical for face-frame and frameless cabinet designs, because standard boring tools can create the opening during normal machining steps. The shallow 1/2 inch height restricts the depth impact on the back side of the panel, preserving interior storage or clearance behind false bottoms.

Details That Help Achieve Repeatable Lighting Results

The 25,000 hour bulb life rating means the LED 2W Cool White Puck Light is engineered for long running hours, which supports installations where lights operate daily and consistent output is important for client satisfaction. The 79 inch cord fixed to each puck gives ample lead length to route through grommets or along cabinet backs, simplifying driver or power supply placement away from the visible zone. When dimming from a wall dimmer is required, this puck uses a dimmable driver, sold separately, with options such as item RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 paired with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, which helps tie into existing wall control layouts. Where a wall dimmer is not part of the plan, the puck works with power supply options SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1, sold separately, which allows scaling total wattage support to the number of pucks specified. The recess mount design, combined with optional surface mount rings sold separately, lets fabricators adapt one light style across different cabinet constructions while keeping color temperature and appearance consistent.

Common Questions About This LED Puck Light

Choose This 5000K Nickel Puck For Focused Tasks

The LED 2W Cool White Puck Light in nickel finish combines 2 watts at 12VDC, 5000K cool white color, and a 53 degree beam spread to support practical cabinet and display lighting. The 2-1/4 inch recess bore hole, 1/2 inch height, and 79 inch attached cord simplify planning around panel machining and driver placement. Matching dimmable driver and power supply options, sold separately, allow the same puck to serve both wall-dimmed and non-dimmed layouts. For shops and installers working with low-voltage cabinetry lighting, this Pro Value Series puck offers a defined set of dimensions and electrical requirements that streamline specifying and layout.