
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro 0.8W LED Tape delivers 0.8 watt per 12 inch output at 12 V, which provides controlled, low-power lighting that suits extended cabinet, shelving, or display runs without overloading typical low-voltage layouts. The tape operates at 3000K, so it provides warm white light that works well where a softer tone is preferred around woodwork and residential-style installations. The tape length of 16.4 feet allows long continuous runs from a single roll, which simplifies planning straight undercabinet or toe-kick segments. A width of 3/8 inch keeps the LED strip narrow, helping it fit in tight channels or under narrow cabinet lips where space is limited. The 5/64 inch height keeps the profile low, which supports concealed mounting where the fixture should stay out of direct sightlines. The tape can be cut every 4 inches, allowing installers to size lighting exactly to cabinet or shelf lengths while limiting waste.
This Pro Value Series LED tape requires a 79 inch lead cord, sold separately as item SZL-PTPCL-79IN-1, which provides the connection between the tape and the power or driver components. When dimming from a wall dimmer is needed, the tape uses a dimmable driver, sold separately as item RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 together with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, so the system can integrate with suitable wall controls. When the installation is not dimmed from a wall dimmer, the tape is powered by a power supply sold separately as SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1, allowing the power unit to be sized to the total wattage demand. The stated bulb life of 25,000 hours supports long-term use, which reduces the frequency of service interruptions in built-in cabinet lighting applications.
The 100 degree beam spread on this LED tape delivers a wide wash of light, which helps when illuminating work surfaces or shelving where even coverage is preferred instead of narrow hot spots. Its 16.4 foot length supports continuous undercabinet or cove lighting runs along walls or long casework sections, simplifying layouts that follow cabinetry lines. The 3000K warm white output suits residential kitchens, bath vanities, or hospitality millwork where a comfortable tone is required around countertops and decorative fronts. The 3/8 inch width allows the tape to sit on narrow face frames or inside slim channels, which is useful in retrofit work where existing profiles give little mounting area. The low 5/64 inch height keeps the tape close to the mounting surface, helping maintain a discreet appearance along cabinet undersides or display edges. Because it can be cut every 4 inches, the tape can follow modular cabinet widths or staggered shelving while still aligning light with edges and corners.
The defined rating of 0.8 watt per 12 inch makes it straightforward to calculate run wattage, which helps match runs to the appropriate SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 power supply capacity. The 12 V requirement aligns with the dimmable drivers RSL-DCE30D-CON-1 and RSL-DCE60D-CON-1, used with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR when wall-dimmer control is planned, helping coordinate drivers and controls from the outset of a job. The 100 degree beam spread supports consistent illumination along continuous runs, which can reduce shadow bands between cabinet sections. The 25,000 hour bulb life rating provides a long operating window, which supports extended use in built-in applications where accessing the tape later may be disruptive. The 79 inch lead cord SZL-PTPCL-79IN-1 offers a defined connection length from the tape to power or drivers, which can assist in locating junction points behind or above cabinets while keeping the lit section properly positioned.
The Pro 0.8W LED Tape is 16.4 feet long, 3/8 inch wide, and 5/64 inch high, which suits long, low-profile runs on cabinets or shelving where space is limited.
The Pro 0.8W LED Tape can be cut every 4 inches, allowing custom-fit sections that align closely with cabinet widths or shelf spans for cleaner terminations.
The Pro 0.8W LED Tape operates at 12 V and draws 0.8 watt per 12 inches, which simplifies power supply sizing and run planning across multiple sections.
This Pro Value Series LED tape outputs 3000K warm white light, which suits kitchens and living areas where a softer, warmer appearance is desired.
When dimming from a wall dimmer, this LED tape uses dimmable drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, coordinating tape, driver, and control.
The Pro 0.8W LED Tape has a rated bulb life of 25,000 hours, which supports long service intervals in built-in cabinet or display lighting applications.
Choose the Pro 0.8W LED Tape when a 12 V, 3000K warm white strip with 0.8 watt per 12 inch output aligns with your cabinet or display lighting layout. Its 16.4 foot length, 100 degree beam spread, and compact 3/8 inch by 5/64 inch profile support continuous, low-profile runs. The ability to cut every 4 inches and connect using the SZL-PTPCL-79IN-1 lead cord, with appropriate drivers or power supplies, helps integrate this Pro Value Series tape into straightforward or multi-run projects.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-PTCON-48IN-1 Mfr# L-PTCON-48IN-1 | R143 Linking Wire, 48", White |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSL-DCE30D-CON-1 Mfr# L-DCE30D-CON-1 | T611 30W Dimmable LED Power Supply with Mounting Block, 6-1/8", Black | ||||
Sold in: 1 Each | RSL-DCE60D-CON-1 Mfr# L-DCE60D-CON-1 | 60W Hardwire Power Supply, 6-11/16", Black |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-RNDTD-NI-1 Mfr# L-RNDTD-NI-1 | R152 60W Round Touch Dimmer, 2-3/8", Nickel | ||||
Sold in: 1 Each | SZL-ROTDIM-BL-1 Mfr# L-ROTDIM-BL-1 | Rotary Dimmer 48 Watts - Pro Value Series L-ROTDIM-BL-1 | ||||
Sold in: 1 Each | SZL-RNDDS-NI-1 Mfr# L-RNDDS-NI-1 | Door Sensor Switch 60 Watts, Round - Pro Value Series L-RNDDS-NI-1 | ||||
Sold in: 1 Each | SZL-PWIRE25-RB-1 Mfr# L-PWIRE25-RB-1 | 300" Roll 18 Gauge Linking Wire, Red/Black |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-EXTCON-48IN-1 Mfr# L-EXTCON-48IN-1 | R161 Extension Cord, 48" | ||||
Sold in: 1 Each | SZL-EXTCON-3IN-1 Mfr# L-EXTCON-3IN-1 | R157 Extension Cord, 3" |