LED 0.8W Cool White Tape Light, 16.4' Roll

LED 0.8W Cool White Tape Light For Projects

LED 0.8W cool white tape light from the Pro Value Series provides 0.8 watt per 12 inch output at 12V, giving installers a controlled light level that suits detailed cabinet, display, or task lighting layouts without overloading compact power supplies. The 5000K cool white color temperature delivers a neutral, bright tone that helps highlight work surfaces and materials where color clarity matters on the job. The 16.4 foot roll length lets you cover longer runs in one line, which reduces connection points along shelves, toe kicks, or cases. A slim 3/8 inch width and 5/64 inch height keep the LED strip low profile, so it fits into tight channels and undercabinet recesses without interfering with doors or hardware. A rated bulb life of 25,000 hours supports long-term installations where access for future changeout is limited.

Key LED Tape Details That Support Your Layout

• The 0.8 watt per 12 inch rating at 12V gives you a clear load calculation for power supply sizing, simplifying planning when balancing multiple runs on one driver in a project.
• The 16.4 foot tape length on a single roll supports extended, continuous lighting lines across cabinets or displays, helping reduce cut points and splices that can add time to an installation.
• The 5000K cool white output provides a consistent, bright appearance along the run, which helps keep workspaces visually uniform when mixing this tape into existing cool white lighting zones.
• The compact 3/8 inch width and 5/64 inch height let the tape sit neatly in shallow channels or under lips, maintaining a concealed install that keeps attention on the cabinetry instead of the light source.
• The 25,000 hour bulb life rating supports long-term use in fixed casework or built-ins, reducing the need to reopen millwork or finished ceilings for light replacement once installed.

Installation And Cut-To-Length LED Tape Details

This Pro Value Series LED tape operates at 12V, so it works within low-voltage lighting layouts that are common in cabinet and display work. The tape can be cut every 4 inches, which lets you size sections to match cabinet bays, shelving spans, or niche dimensions with less excess. That cut interval helps align tape ends with corners or transitions, improving visual finish at the ends of runs. A required 79 inch lead cord, sold separately as item SZL-PTPCL-79IN-1, connects the tape light to power components, supporting flexible routing to drivers or power supplies within nearby compartments. This setup lets installers position drivers or power supplies where access is practical while still feeding light to the exact run location.

Using This Pro Value Series LED Tape In Projects

Where This 16.4 Foot LED Tape Works Best

This 16.4 foot LED tape roll suits projects where a continuous, low-profile light line is needed across cabinets, shelving, or casework. The 12V operation fits standard low-voltage layouts often used in furniture and built-in installations. With 0.8 watt per 12 inch consumption, you can plan multiple segments from one power supply by calculating total run wattage, which is useful when coordinating several cabinet bays off a single feed. The tape can be cut every 4 inches, so you can trim runs to align with cabinet widths or display sections, helping avoid dark gaps or overhangs at the edges. The 5000K cool white color creates a bright, neutral light that supports visibility for tasks or merchandise viewing. Its 3/8 inch width and 5/64 inch height allow it to nest into slim channels, so it works well in tight reveals, under shelves, or inside display cases without crowding other hardware.

Details That Support Consistent, Repeatable Results

The Pro Value Series LED tape uses a defined 0.8 watt per 12 inch rating at 12V, which simplifies repeatable layouts because each run segment adds a predictable load to your design. Being able to cut the tape every 4 inches lets you repeat cabinet or shelf sections with the same trimmed length, giving a uniform appearance across banks of units. The specified 16.4 foot roll length makes it straightforward to plan how many rolls are needed to cover long counters or multi-bay displays in one continuous style. A 100 degree beam spread creates a wide wash from each LED section, which helps blend light along the surface and reduces spotting when the tape is positioned close to backsplashes or panel faces. The rated 25,000 hour bulb life supports projects where long service life is important because access for future work is limited by finished millwork. Required components such as the 79 inch lead cord and compatible dimmable or non-dimmable power supplies, each sold separately, standardize the connection approach across installations.

Common Questions About This LED Tape Light

Choose This LED Tape For Precise 12V Runs

The Pro Value Series LED 0.8W cool white tape light, 16.4 foot roll, combines 12V operation, 5000K output, and a slim 3/8 inch by 5/64 inch profile to support clean, low-profile cabinet and display lighting. The ability to cut every 4 inches and the defined 0.8 watt per 12 inch load help you design predictable, repeatable runs across multiple bays. With 25,000 hour rated bulb life and specified required components for dimming or non-dimming setups, this tape light fits project workflows where consistent performance and standardized parts streamline installation.