Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
15 x 21 workstation bracket white defines this Pro Value Series support as a steel bracket sized for 15 inch by 21 inch applications, so it fits typical workstation and countertop depths in shops, garages, and commercial stations. The workstation and countertop brackets category positioning ties this part directly to horizontal surface support work where a stable, fixed bracket is needed. A 1,000 lb per pair load rating establishes its capacity, allowing substantial static loads when pairs are spaced and fastened according to the bracket layout. The 1/8 inch steel construction gives the bracket its strength, so the arm and back plate resist bending under the rated load. A white finish provides a clean, neutral appearance that visually blends with many counters, shelves, and wall colors. Packaged in equal quantities of rights and lefts, the bracket set supports mirrored installations along a run.
Multiple mounting 1/4 inch hole locations in each bracket provide a range of positions for fasteners, so brackets can be aligned to framing, wall cleats, or other substrates while still following a consistent layout along the run. The 3 inch x 3 inch 45 degree notch on the six larger sizes creates clearance for a wall cleat and wire run, allowing a cleat or conduit to pass through that zone instead of forcing offsets in the bracket layout. Being sold in pairs only supports an installation pattern that always has a left and right bracket, which aligns with typical workstation spans where at least two bracket points are needed. The 15 x 21 sizing places the bracket in a dimensional range suited to medium-depth tops, helping installers match bracket projection with surface depth.
This workstation and countertop bracket is specified for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it spans applications from heavier shop benches to lighter duty office or technology stations. The 15 inch by 21 inch size pairs well with many countertop depths used in those environments, allowing the arm length to sit under the majority of the surface for support. In garage storage setups, the 1,000 lb per pair load rating helps when supporting dense bins or tools on a counter-height surface. In ADA stations and computer stations, the white finish helps the support blend with lighter tops and walls, which is often preferred in more finished spaces. The Pro Value Series branding ties this part into a broader line of workstation support products, which can assist when matching brackets across several areas.
Multiple mounting 1/4 inch hole locations give installers several anchor points along both the vertical and horizontal legs, so they can select patterns that best align with studs, cleats, or other structural elements while maintaining a uniform bracket pitch across a wall. The reversible design lets the bracket orientation be changed without changing the part, which saves time when conditions on one side of a station differ from another but require the same support geometry. The 3 inch x 3 inch 45 degree notch available on the six larger sizes allows wall cleats and wire runs to pass through that section, helping maintain continuous electrical or support lines without cutting around the bracket. A load rating of 1,000 lb per pair gives a clear working capacity reference that can be applied consistently across multiple stations, so similar brackets can be laid out with comparable expectations. The 1/8 inch steel section used in the bracket body resists flexing across installations, promoting level surfaces when used within the stated load range.
The 15 x 21 workstation bracket is specified for workbenches, workstations, garage storage, ADA stations, and computer stations, so it supports a range of horizontal surfaces in shops and commercial spaces.
The workstation bracket has a load rating of 1,000 lb per pair, which sets its static capacity when brackets are properly paired beneath a countertop or work surface.
The workstation and countertop bracket is made from 1/8 inch steel, giving the arms and vertical leg strength to resist bending within the stated load rating.
The reversible design lets the same bracket be oriented in alternate directions, which helps installers adapt to different wall or layout conditions without changing part numbers.
The multiple mounting 1/4 inch hole locations give several fastening options, allowing alignment with framing members or cleats while keeping the bracket securely attached.
On the six larger sizes, the 3 inch x 3 inch 45 degree notch creates space for a wall cleat or wire run, helping those elements pass through the bracket area without interruption.
The 15 x 21 workstation bracket white finish from the Pro Value Series combines 1/8 inch steel construction with a 1,000 lb per pair load rating, so it suits workbenches, workstations, and storage counters that need fixed, steel support. Multiple mounting 1/4 inch hole locations and a reversible design give flexibility when setting bracket positions along walls or cleats. For projects calling for workstation and countertop brackets in this size and color, this model aligns structural rating, layout options, and appearance in one part number.
Sold In: 3 Pair
