24" x 29" Heavy Duty Workstation Bracket, White Finish (3 Pair)

24 x 29 Heavy Duty Workstation Bracket Use

24 x 29 heavy duty workstation bracket describes a Pro Value Series steel bracket sized for substantial support, so it can carry serious loads in workbenches and counter areas where failure is not acceptable. The 1,000 lb per pair load rating shows this 24 inch by 29 inch bracket is built for high-capacity applications, giving confidence when supporting heavy materials or equipment. The 1/8 inch steel construction provides a solid structural section, which helps the bracket resist flexing under load in busy shop or garage environments. The white finish gives a clean appearance that blends well with many workstations, ADA stations, computer stations, and garage storage layouts. Being part of the Workstation and Countertop Brackets product class defines its role in supporting horizontal surfaces, so it fits naturally into cabinet, bench, or countertop support plans.

Key Workstation Bracket Details That Matter

• The load rating at 1,000 lb per pair supports heavy-duty use on workbenches and workstations, which reduces concerns about sagging when installing deep tops or dense materials.
• The 1/8 inch steel material provides a robust section for the bracket arms, which helps keep deflection under control when the bracket is fastened to solid framing.
• The white finish gives the bracket a neutral, finished look, which suits visible garage storage, ADA stations, and computer stations where appearance matters alongside strength.
• Multiple mounting 1/4 inch hole locations offer flexible placement for fasteners, which simplifies aligning the bracket to studs, wall cleats, or under-counter framing in various layouts.
• The reversible design makes brackets versatile and easy to use, which streamlines installation by allowing either orientation to adapt to the workstation or countertop design.

Mounting And Alignment With 24 x 29 Brackets

The multiple mounting 1/4 inch hole locations along the bracket arms give several fastening options, so installers can select the holes that best line up with wall cleats, studs, or bench framing. This flexibility helps achieve solid anchoring without extensive layout changes on existing structures. The reversible design allows the bracket to be oriented to suit the workstation, garage storage, ADA station, or computer station configuration, which saves time when matching bracket geometry to the surface being supported. The 3 inch by 3 inch 45 degree notch on the six larger sizes allows for wall cleat and wire run clearance, giving space behind the bracket leg for a cleat or cables without interference.

Using Pro Value Workstation Brackets On The Job

Where This Workstation Bracket Performs Best

This Pro Value Series workstation and countertop bracket is described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it suits a wide range of horizontal surface supports in shops and utility areas. The 24 inch by 29 inch size pairs well with deeper work surfaces, allowing the arms to reach further under tops used for tools or equipment. The 3 inch by 3 inch 45 degree notch on the six larger sizes creates clearance for wall cleats and wire runs, which benefits installations that rely on continuous cleats or need raceways behind brackets. The white finish lets this heavy duty workstation bracket fit into lighter color schemes often seen in computer stations and many ADA station designs, maintaining a consistent visual line under countertops or benches. Because it belongs to the Workstation and Countertop Brackets product class, it functions naturally anywhere a rigid wall- or frame-mounted support is needed for a work surface.

Details Supporting Repeatable Mounting And Layout

The 1,000 lb per pair load rating provides a clear performance figure for planning bracket spacing along a bench or countertop, which helps installers set out the supports to carry anticipated loads. The 1/8 inch steel construction contributes to predictable stiffness, so once spacing is chosen, the bracket behavior under normal loads stays consistent from one installation to the next. Multiple mounting 1/4 inch hole locations give repeated opportunities to land fasteners in preferred framing, making it easier to mirror layouts across several workstations in a shop or garage storage project. The reversible design simplifies stocking and planning because the same bracket style can face either direction, supporting mirrored layouts on opposite walls or along island-style workbenches. On the six larger sizes, the 3 inch by 3 inch 45 degree notch for wall cleat and wire run clearance reduces conflicts between structure and services, aiding clean routing of wiring or support cleats behind the bracket.

Common Questions About This Workstation Bracket

Choosing This Bracket For Workstation Projects

This 24 x 29 heavy duty workstation bracket from the Pro Value Series pairs a 1,000 lb per pair load rating with 1/8 inch steel, giving strong support for workbenches, counters, and storage runs. The white finish and reversible design suit both visible workstations and utility areas, while multiple mounting 1/4 inch hole locations and the 3 inch by 3 inch 45 degree notch on the six larger sizes support clean layouts with wall cleats and wire runs. For projects built around workstation and countertop brackets, this model delivers the capacity and mounting flexibility needed for repeatable shop, garage, ADA, and computer station installations.