Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
21 x 21 heavy duty workstation bracket defines this Pro Value Series support as a steel bracket designed for serious work surfaces. The 21 inch by 21 inch size creates a deep support footprint that helps carry larger workbenches, countertops, or stations without relying on short, undersized braces. The white finish gives a clean, neutral look that blends easily into workstations, ADA stations, computer stations, and garage storage layouts where appearance matters alongside load capacity. A load rating at 1,000 lb per pair means the bracket pair is engineered to handle substantial static loads, so heavy benchtop tools, materials, or dense storage setups can be planned with confidence around that capacity. Being part of the Workstation and Countertop Brackets product class places it squarely in applications where rigid, wall-mounted support is needed to keep work surfaces solid over time.
These Pro Value Series workstation and countertop brackets use multiple mounting 1/4 inch hole locations to tie into the supporting structure. That pattern gives flexibility to align with studs or other framing members, which helps builders design stable support for workbenches, workstations, garage storage, ADA stations, and computer stations. The 21 inch by 21 inch geometry sets a consistent projection and height relationship, so installers can line up repeated brackets under long tops while keeping the front edge supported on a common line. A 3 inch by 3 inch 45 degree notch on the six larger sizes provides clearance for a wall cleat and wire run, which helps electricians and builders route cabling or cleats without interfering with the steel support arm.
This 21 inch x 21 inch heavy duty workstation bracket from the Pro Value Series is part of a family designed for workbenches, workstations, garage storage, ADA stations, and computer stations. In a workbench or workstation, the 1,000 lb per pair load rating supports substantial benchtops and the equipment that rests on them, so layout decisions can factor in heavier tools or dense parts bins. In garage storage applications, the 21 inch projection supports deeper shelves or countertops, giving room for bulky containers while staying tied back to wall framing through the multiple 1/4 inch mounting holes. In ADA stations and computer stations, the white finish presents a clean, neutral appearance that works with many surface materials while the steel structure maintains a consistent support height for accessibility-focused layouts.
The reversible design makes these workstation and countertop brackets versatile for repeat installations because each bracket can be oriented to work around site-specific constraints while still presenting the same 21 inch by 21 inch support geometry. Multiple mounting 1/4 inch hole locations provide several options to fasten into framing, which helps installers repeat a reliable fastening pattern across a long run of benches or countertops. The 3 inch x 3 inch 45 degree notch on the six larger sizes allows clearance for wall cleats and wire runs, simplifying coordination with wall backing and electrical routing so installers do not need to alter the steel support to pass cables. Packaged in equal quantities of rights and lefts ensures that each pair forms a true mirrored set, creating consistent visual lines and balanced structural support under every section of the work surface.
The 21 x 21 heavy duty workstation bracket is rated at 1,000 lb per pair, so a properly spaced pair can support substantial countertops, benches, or stations within that static load rating.
The 21 inch by 21 inch bracket geometry provides a deep horizontal projection and vertical leg, helping support larger or deeper workbenches, garage storage shelves, ADA stations, and computer stations.
Multiple mounting 1/4 inch hole locations give several fastening points, allowing installers to align brackets with framing members and spread the load across more fasteners for stable support.
The reversible design lets the 21 x 21 heavy duty workstation bracket be oriented as needed on site, helping work around obstructions while keeping consistent support geometry under the surface.
The 3 inch x 3 inch 45 degree notch on the six larger sizes creates clearance for a wall cleat and wire runs, so wiring or backing can pass behind the bracket leg without conflict.
This Pro Value Series 21 x 21 heavy duty workstation bracket uses 1/8 inch steel, providing a rigid metal support arm suited to demanding workstation and countertop applications.
The 21 x 21 heavy duty workstation bracket, white finish, from the Pro Value Series combines a 1,000 lb per pair load rating with 1/8 inch steel construction for demanding workbench, garage storage, ADA station, and computer station layouts. The reversible design, multiple mounting 1/4 inch hole locations, and 3 inch x 3 inch 45 degree notch on the six larger sizes provide flexibility in real-world installations where cleats and wire runs are present. When planning workstation and countertop brackets for your next project, align your layout around this bracket size and rating to support deeper tops and heavier loads across your run.
Sold In: 3 Pair
