Festool Granat 5 inch 180 grit sanding disc is a paper backed abrasive disc that handles a wide range of surface prep tasks with one setup, which helps keep sanding steps consistent from job to job. The 5 inch diameter works with sanders designed for that pad size, so the disc tracks evenly across the work surface without odd overhangs. A hook and loop backing lets the disc attach to matching pads quickly and release without tools, so changing grits or worn discs fits neatly into normal workflow. The disc uses hardened aluminum oxide on a paper backing, so the abrasive cuts while the paper supports it across the full face. Nine holes are arranged in the disc, so sanders with a matching pattern can pull dust through the sheet and away from the cutting surface during work. Festool Granat abrasive is suited for nearly all common shop sanding applications.
This Festool Granat disc uses a hook and loop backing, so it mates with compatible hook and loop sanding pads during setup. The 5 inch size pairs with sanders and pads built for that diameter, which keeps the abrasive area fully supported out to the edge as it runs. Nine holes are formed in the disc, so when used on machines with a matching 9 hole pattern, dust is drawn through those openings into the sander. That through-disc dust movement keeps abrasive grains exposed to the work rather than loading over quickly. The paper backed construction carries the hardened aluminum oxide across the entire face, so the abrasive layer stays even across the pad as it contacts the surface.
This Granat 5 inch P180 abrasive disc is well suited for nearly all applications listed by the manufacturer, so it can move from bare wood to coated or engineered materials within the same shop. On bare wood, the 180 grit cut lets operators smooth panels or components while leaving a refined surface ready for subsequent finishing steps. On paints and most modern paint systems, the disc can level minor texture without aggressively cutting through the coating system, which supports controlled surface adjustments. The disc is suited for VOC clear coats, so clear finished parts can be sanded within the same abrasive family while working inside those material requirements. On plastic materials, solid surface materials, acrylics, and composites, the hardened aluminum oxide abrasive provides the cutting surface needed for these denser or synthetic substrates.
Granat uses hardened aluminum oxide as the abrasive, so each grain is built to cut rather than smear across the surface during use, which supports even stock removal across the pad. The abrasive is synthetic resin bonded, so the grains are held in place on the paper backing as the disc runs against the work, which maintains a predictable scratch pattern across the sanding step. The disc is closed coated, so the abrasive grains cover nearly the entire surface area of the paper, which leads to a dense cutting surface that refines the workpiece with each pass. The hook and loop backing lets users seat the disc flat against the pad, which keeps the 9 hole pattern aligned for dust movement through the disc while sanding. The 5 inch diameter and 180 grit combination work with compatible sanders to deliver a controlled, fine sanding step that can be repeated across multiple components.
The Festool Granat 5 inch 180 grit sanding disc is well suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites.
The Granat 5 inch disc uses a 9 hole pattern, so it works with sanders that share this 5 inch 9 hole hook and loop interface for dust extraction through the disc face.
The Festool Granat disc uses hardened aluminum oxide, so the abrasive grains cut consistently on wood, coatings, and engineered materials while the paper backing supports them across the disc.
The P180 grit rating on this Festool Granat disc places it in a fine sanding range, so it suits intermediate smoothing steps where controlled material removal and refined scratch patterns are needed.
The Granat disc uses synthetic resin to bond the hardened aluminum oxide to the paper backing, so the grains stay attached as the disc runs under normal sanding loads.
The Festool Granat disc is closed coated, so abrasive grains cover nearly the full surface, creating a dense cutting area that refines the workpiece with each sanding pass.
The Festool Granat 5 inch 180 grit hook and loop 9 hole hardened aluminum oxide sanding disc provides a fine sanding step across bare wood, paints, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites. With hardened aluminum oxide, synthetic resin bonding, and closed coated construction on a paper backing, the disc is built for cutting action that supports consistent shop sanding workflows. For projects that move between wood, coatings, and engineered materials, this Granat disc keeps abrasive choice aligned with Festool specifications while using equipment set up for 5 inch 9 hole hook and loop discs.
Sold In: 1 Box