Hickory Hardware self-close 1/2 overlay hinge gives a face-mount solution for 1/2 inch overlay cabinet doors, so doors sit correctly on face frames with a defined, repeatable reveal. The semi-concealed hinge style leaves only what you need visible, which helps maintain a clean cabinet appearance while still allowing straightforward alignment. Its partial wrap design engages the edge of the face frame, providing a stable mounting surface that supports consistent door positioning over time. The self-close function pulls the door shut at the end of travel, which helps keep doors closed without additional catches and reduces minor alignment fuss after installation. A 2-1/4 inch length and 1-1/2 inch projection set the door off the frame in a controlled way, so you can plan clearances and adjacent doors around known dimensions.
The face-mount style of this 1/2 inch overlay hinge places all frame fasteners on the front of the face frame, which helps during installation when working in tight cabinet interiors. Its partial wrap form engages both the face and edge of the frame, giving a positive registration surface that helps keep hinges square as they are fastened. The 1/2 inch center-to-center dimension between critical mounting references supports consistent drilling or marking when setting up for multiple doors. Because projection is defined at 1-1/2 inches, you can coordinate door depth with interior components and adjacent fronts using known stand-off rather than estimating by eye.
This semi-concealed hinge is designed for 1/2 inch overlay doors on face-frame cabinets, so it fits jobs where the door intentionally overlaps the frame by that specific amount. The 1/2 inch overlay value ties directly to layout, letting you align doors along a bank of cabinets with consistent margins using the same hinge spec. A width of 1-1/3 inches defines the footprint on the frame, so you can plan stile width and hinge spacing with clear edge distances. The 2-1/4 inch overall length establishes how far along the stile the hinge runs, which helps coordinate multiple hinges on tall doors without crowding rails. Because it is part of the Hickory Hardware line under the Belwith Keeler brand, it matches that family of cabinet hardware, which supports uniform appearance across doors when using other Hickory Hardware items.
The self-close action on this hinge helps pull the door shut during the last part of movement, which reduces the tendency for doors to sit slightly ajar after normal use. That closing behavior is built into the hinge, so there is no separate catch adjustment needed to hold doors closed under normal cabinet loads. The vintage bronze finish carries through on the visible parts of this semi-concealed design, so the hinge works as a visible trim component wherever the knuckle or frame leaf shows. Steel construction provides a solid base material for the hinge components, supporting the hinge geometry and self-close function under repeated cycles in everyday cabinet environments. Sold in pairs, the hinge arrangement is set up so that a typical cabinet door can use a matched pair, aligning with common door layouts in kitchens, baths, or shop cabinetry.
The hinge supports a 1/2 inch overlay, so the cabinet door overlaps the face frame by 1/2 inch, which sets a consistent reveal along the front of the cabinet.
The self-close hinge action pulls the door shut at the end of travel, which helps keep doors closed and reduces small gaps without separate catches.
The hinge has a 1-1/2 inch projection, positioning the door a defined distance from the frame to coordinate door depth and interior clearances.
The hinge length is 2-1/4 inches with a width of 1-1/3 inches, giving a clear mounting footprint along the face frame stile.
The hinge is made from steel with a vintage bronze finish, combining a strong base metal with a dark, traditional appearance on visible areas.
The hinge is sold in pairs and also available in full box quantities of 25 pairs, matching common needs for single doors or larger runs.
This Hickory Hardware self-close 1/2 overlay hinge combines 1/2 inch overlay geometry, a face-mount partial wrap design, and semi-concealed styling to support clean, repeatable cabinet door layouts. Steel construction and a vintage bronze finish provide both structure and coordinated appearance where the hinge shows on the frame. With defined length, width, and 1-1/2 inch projection, it supplies clear mounting and clearance references for planning door runs. For projects calling for 1/2 inch overlay on face-frame cabinets, this Belwith Keeler P2710F-VB hinge offers a focused option ready for cabinet installation work.