Hickory Hardware self-close 1/2 overlay hinge gives a face-mount option for 1/2 inch overlay cabinet doors, so you can lay out standard face-frame runs with predictable door coverage. The hinge is a semi-concealed design, which leaves part of the hinge visible while the working parts sit tight to the frame for a clean but serviceable look. Its partial wrap style grips the cabinet frame edge, helping the door stay aligned relative to the face frame. A self-close function pulls the door shut at the end of travel, which reduces door bounce and helps doors rest consistently against the face frame. The hinge is sold in pairs, so each pair can be assigned to a single door during planning and installation.
This 1/2 inch overlay face-mount hinge is designed for door mounting where the hinge sits on the face of the frame, so layout work focuses on frame-to-door positioning rather than mortising. A center-to-center measurement of 1/2 inch between screw locations guides drilling patterns, keeping screw placement consistent from door to door. The 1-1/2 inch projection dimension describes how far the door stands out from the mounting surface at the hinge, which helps when planning clearances near adjacent cabinets or walls. A 2-1/4 inch length gives the hinge a compact footprint along the door edge, useful where stile width is limited.
This semi-concealed face-frame hinge belongs in cabinet runs that specify a 1/2 inch overlay, because its overlay dimension directly controls how much of the frame gets covered. The partial wrap form is intended for face frames where the hinge wraps the frame edge, so it establishes a solid reference between door and frame. Width of 1-1/3 inch defines how much space the hinge occupies across the face, which helps coordinate with narrow frames or tight door spacing. With 1-1/2 inch projection, the hinge sets the door stand-off from the frame, which matters when cabinets sit near walls, appliances, or other doors. The white finish matches white cabinet faces or interiors, helping the visible hinge sections sit quietly in the overall cabinet design while still being easy to locate along the frame.
The 1/2 inch overlay rating ties directly to door sizing, because door width and height calculations can be based around that fixed coverage over the frame. A 2-1/4 inch length and 1-1/3 inch width give a predictable envelope for the hinge footprint, which reduces surprises when working with narrow rails or stiles. The specified center-to-center distance of 1/2 inch between mounting points supports repeatable hole drilling, which speeds template work and keeps doors lining up evenly across a bank of cabinets. Steel material provides a consistent substrate for screws and hinge knuckles, which is important in everyday cabinet use where hinges move repeatedly under door load. The self-close action contributes to doors resting reliably against the frame, which supports uniform reveals along the cabinet face line.
The P2710F-W2 is a semi-concealed, face-mount, partial wrap hinge, so it mounts on the face frame while wrapping the frame edge and leaving some of the hinge visible.
This hinge provides a 1/2 inch overlay, meaning the cabinet door covers 1/2 inch of the face frame, which simplifies door sizing and layout for consistent reveals.
The hinge is made of steel with a white finish, so it offers a metal hinge body with a neutral color suited to white or light cabinet designs.
This hinge is classified as a semi-concealed face-frame hinge, so it is aimed at applications where part of the hinge shows while most sits against the frame.
The hinge has a 1-1/2 inch projection, which defines how far the mounted door stands out at the hinge side, important for planning adjacent clearances.
The P2710F-W2 hinge has a 2-1/4 inch length and 1-1/3 inch width, giving a compact footprint helpful when working with narrow cabinet frames or door stiles.
The Hickory Hardware self-close 1/2 inch overlay face-mount hinge from Belwith Keeler combines a 1/2 inch overlay, semi-concealed face-frame design, and partial wrap construction in steel with a white finish, making it a practical option for planned 1/2 inch overlay cabinet door runs.