
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware self-close hinge is a semi-concealed face frame hinge that provides a 1/4 inch overlay, so the door edge covers 1/4 inch of the cabinet face frame and creates a consistent reveal across a run of doors. This hinge is described as partial wrap, which means the hinge leaf wraps around part of the face frame, giving the door a stable mounting point on face-frame cabinetry while keeping most of the hardware out of sight. The hinge belongs to the Semi-Concealed collection and product class, so only a small portion of the hinge shows when the door is closed, which helps cabinets keep a cleaner appearance while still giving visible access to the pivot point for adjustments or replacement. The material is steel, so the hinge body is built from metal that supports the cabinet door weight within the size range intended for this pattern of hinge.
This semi-concealed face frame hinge installs as a screw-on hinge, so the leaves are fastened to the cabinet and door with screws for a direct mechanical attachment to the wood. The specified overlay of 1/4 inch defines the relationship between the hinge, door, and face frame, so once the hinge is located for that overlay, the door edge sits in the intended position relative to the frame edge. The hinge projection is listed as .65 inch, so the door edge carried by this hinge stands off from the frame by approximately that distance, which matters when checking clearance to adjacent doors or interior components. The hinge width is 2.68 inches and the overall length or diameter is 2.75 inches, so the footprint of the hinge on the door and frame is defined for layout, drilling, and spacing from nearby hinges or cabinet features.
This hinge is described as a semi-concealed face frame hinge in the Semi-Concealed collection, so it is oriented to traditional face-frame cabinet construction where part of the hinge is visible at the door edge and the rest is behind the door and frame. The 1/4 inch overlay specification means it suits cabinet doors designed to overlap the frame by 1/4 inch, which fits common kitchen, bath, or utility cabinets laid out with that overlay pattern. The partial wrap description points to use on face frames where the hinge leaf wraps around the frame edge, which helps set consistent hinge positioning up and down the stile when repeating the layout across multiple doors. The polished brass finish, described together with antique brass in the product data, gives the visible portions of the hinge a brass appearance, which supports cabinet runs where matching or coordinating brass hardware is part of the design intent.
The 1/4 inch overlay value is a fixed design characteristic of this hinge, so when you install multiple hinges of this type on a project, each door aligns to the same face-frame overlap, which helps maintain straight sight lines across a bank of doors. The partial wrap configuration wraps around part of the face frame, so the hinge has a defined seating reference at the frame edge, which assists with repeatable hinge placement from cabinet to cabinet using the same measurements or jigs. The screw-on installation method means the hinge attaches with screws through the leaves, so the mounting holes provide specific points that tie the hinge to the wood, which helps keep the door position consistent over time when properly fastened. The projection of .65 inch and width of 2.68 inches define how far the hinge and attached door extend from the face frame and how wide the hinge sits on the surfaces, which supports planning clearance to neighboring doors, walls, or interior rollouts when using this hinge in a cabinet run.
The Hickory Hardware self-close hinge is a semi-concealed face frame hinge, so it suits cabinets built with a face frame where part of the hinge sits on the frame and part on the door edge.
The 1/4 inch overlay means the door overlaps the face frame by 1/4 inch, so door edges align to that offset across cabinets using this hinge pattern.
The partial wrap description indicates the frame leaf bends around part of the face frame, so the hinge locates at the frame edge and supports consistent placement along the stile.
The P60010F-AB hinge material is steel, so the hinge body and moving knuckle are formed from metal suited to typical cabinet door support in this hinge style.
The hinge has a polished brass finish described as antique brass, so the visible portions present a brass tone that coordinates with brass cabinet hardware.
The hinge has a length of 2.75 inches, a width of 2.68 inches, a projection of .65 inch, and a 1/4 inch overlay, so these values guide hinge spacing and door clearances.
The Hickory Hardware self-close hinge from Belwith Keeler combines a 1/4 inch overlay, semi-concealed face frame design, and partial wrap configuration, so it suits projects laid out for that overlay on face-frame cabinetry. The polished brass finish described as antique brass ties cabinet hinge appearance to other brass-finished components, which is valuable when uniform hardware color is part of the job scope. Using a hinge with known dimensions of 2.75 inches in length, 2.68 inches in width, and .65 inch projection lets you plan door spacing and clearances around this specific pattern when setting up new cabinets or matching an existing installation.