Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware self-close 1/4 overlay hinge gives a semi-concealed solution for face frame cabinets, so doors present a clean look while hinge arms still remain accessible for mounting and replacement. This hinge is described as a semi-concealed face frame hinge, which means part of the hinge shows on the face frame while the rest sits behind the door edge, allowing straightforward alignment on traditional framed cabinet construction. The hinge is identified as self-close, so the spring mechanism draws the door shut at the end of travel, helping doors stay closed without separate catches on everyday residential or light commercial cabinetry. The product is listed as a 1/4 inch overlay hinge, so the door covers 1/4 inch of the face frame, which helps match existing overlay reveals on partial overlay installations. The manufacturer part number P60010F-3 ties this hinge to the Hickory Hardware and Belwith Keeler offering for job or re-order reference.
This product is described as a semi-concealed face frame hinge, so it is intended to mount directly to cabinet face frames where a traditional framed construction is present. The overlay is specified at 1/4 inch, so when the hinge is positioned, the door edge will cover the frame by that amount, which is important when aligning multiple doors to keep even reveals. The hinge is identified as a screw-on style, so it fastens to the cabinet and door using screws for a fixed position installation that holds alignment after layout. Dimensions of 2.75 inches in length and 2.68 inches in width give installers reliable sizing when laying out hinge locations on stiles and door edges. A projection of 0.65 inches indicates how far the hinge stands off the mounting surface, which helps evaluate side clearances where cabinets sit close to walls or adjacent doors.
The product is categorized under semi-concealed face frame hinges, so it suits framed cabinet boxes where part of the hinge will be visible on the face and part will be hidden behind the door. The overlay is listed as 1/4 inch, so this hinge aligns with cabinet layouts that are designed for quarter-inch partial overlay doors rather than full overlay or inset applications, helping keep reveals consistent across upper and base cabinets built to that standard. The hinge is described as partial wrap in the SAP description, so the leaf shape wraps around part of the face frame edge, which provides a positive registration surface on the frame and can help maintain consistent door positioning across multiple units. The screw-on reference in the product name indicates that installation relies on screws, so the hinge attaches rigidly to both the face frame and the door stile in typical cabinet shop or jobsite workflows.
The self-close description signals an internal mechanism that pulls the door shut near the closing point, which supports uniform closing action on paired doors and reduces the tendency for doors to rest partially open in everyday use. The steel material specification means the load-bearing parts of the hinge are made from steel, which supports stable screw holding at the hinge knuckle area through repeated open and close cycles in normal cabinet service. The length of 2.75 inches and width of 2.68 inches provide predictable hinge leaf coverage on the door and frame, which helps installers set up jigs or marks for consistent hinge setbacks across a run of doors. A projection value of 0.65 inches defines how far the hinge body stands proud from the mounting surface, informing clearances to adjacent cabinets, fillers, or interior pullouts so that door swing remains unobstructed. The polished brass finish description identifies the surface color and sheen of the visible portions, which helps project planners tie hinge selection to other polished brass elements across a room so the hardware reads as a coordinated system.
The hinge is described as a semi-concealed face frame hinge, so it is intended for cabinets built with a face frame where part of the hinge shows on the frame.
The hinge is specified as a 1/4 inch overlay hinge, so the cabinet door covers 1/4 inch of the face frame when the hinge is positioned correctly.
The self-close description means the hinge has a closing action that draws the door shut near the end of travel, helping doors stay closed without separate catches.
The finish is listed as polished brass, so the visible hinge portions present a bright brass look that coordinates with similar brass cabinet pulls and knobs.
The hinge lists a length of 2.75 inches, a width of 2.68 inches, and a projection of 0.65 inches, which guide hinge positioning and clearance planning.
The material is specified as steel, so the hinge body uses steel construction that supports stable screw holding at the mounting points.
This Hickory Hardware self-close 1/4 overlay hinge combines semi-concealed face frame mounting, partial wrap design, and steel construction, so it fits quarter-inch overlay framed cabinets needing dependable everyday movement. The defined 2.75 inch length, 2.68 inch width, and 0.65 inch projection give clear layout references, while the polished brass finish coordinates with brass decorative hardware across a project. For projects using Belwith Keeler or Hickory Hardware components, the P60010F-3 part number ties this hinge directly into reorder and scheduling workflows when the same look and function are required across multiple cabinet runs.