Hickory Hardware self-close hinge is a semi-concealed face frame hinge that uses a 1/4 inch overlay, so the door overlaps the face frame by that amount for consistent reveals on cabinet runs. The hinge is described as partial wrap, which means it wraps over the face frame edge to stabilize the door pivot and support everyday cabinet use. A screw-on design is specified, so the hinge mounts with screws for a solid mechanical connection to the cabinet and door. The product is identified as a semi-concealed hinge, so part of the hinge is visible while the rest is hidden for a balanced blend of access and appearance. The finish is satin nickel, which provides a muted metallic look that suits many modern and traditional cabinet styles. The hinge belongs to the Semi-Concealed collection, keeping it aligned with similar hardware in the same family.
This hinge is defined as a face frame hinge with 1/4 inch overlay, so it is suited to cabinets that use a front frame where the door overlays the frame instead of sitting flush inside. The overlay value helps installers line up multiple doors so the gaps between them stay visually consistent. The hinge is described as semi-concealed and partial wrap, so it sits partly around the frame edge while leaving some of the hinge visible, which can simplify mounting and door removal compared with fully concealed systems. The screw-on designation means the hinge is fastened directly with screws into the frame and door, giving a straightforward installation sequence that fits common cabinet construction methods.
This hinge is classified as a semi-concealed face frame hinge, so it is applied on cabinets that feature a front frame where the hinge mounts to the frame rather than to a frameless panel side. The 1/4 inch overlay specification places the door edge so it overlaps the frame by that amount, which suits layouts where doors are designed to cover most of the frame front yet leave a controlled reveal. The description notes the hinge as partial wrap, meaning it wraps around part of the face frame edge to seat more firmly on the cabinet structure and support the swinging motion of the door. The steel material statement indicates the hinge body is made from steel, which holds up under typical cabinet door cycles in kitchens, baths, shops, and similar interior spaces.
The self-close description signals that the hinge mechanism is designed to pull the door closed near the end of travel, which helps doors return to a closed position without repeated manual nudging. The overlay dimension of 1/4 inch gives a fixed reference for door placement, helping installers keep reveals consistent from cabinet to cabinet during layout. The projection value of 0.65 inch dictates how far the door stands out as it moves past the frame line, affecting how the edge clears adjacent doors or trim when opened. The specified width of 2.68 inches spreads out the mounting area on the face frame, so loads from opening and closing are shared over more wood surface. The satin nickel finish described for this hinge supports projects where visible hardware needs a coordinated appearance with other satin nickel pieces in the same installation. The manufacturer part number P60010F-SN ties the hinge to a specific catalog reference, helping match identical hinges when repeating a job or extending an existing run of cabinets.
This hinge is a semi-concealed face frame hinge, so it is designed for cabinets that use a face frame where the hinge mounts on the frame front.
The hinge has a 1/4 inch overlay, so the door overlaps the face frame by that amount, helping keep door reveals consistent across a cabinet run.
This hinge is semi-concealed, so part of the hinge is visible on the face frame while the rest is hidden, balancing access and appearance on the cabinet front.
The hinge is described as self-close, so it is designed to pull the door closed near the end of travel, helping doors reach a closed position more reliably.
The projection is 0.65 inch, so the hinge moves the door that distance away from the frame, influencing how it clears neighboring doors and trim when opened.
The hinge material is steel, so the hinge body is made from a metal suited to handling regular cabinet door opening and closing in typical interior environments.
This Hickory Hardware self-close hinge combines a 1/4 inch overlay, semi-concealed face frame design, and partial wrap construction, so it fits projects that call for framed cabinets with a modest door overlap. The satin nickel finish and steel material provide a cabinet hinge option that aligns with nickel-toned projects while supporting routine door movement. For work that needs a defined 1/4 inch overlay, a face frame mounting pattern, and a self-close action, this P60010F-SN hinge offers a clearly specified set of dimensions and characteristics that can be repeated across multiple installations.