Grass Maxcess 9" Soft-Close 7/8 Extension Undermount Drawer Slides, Roller Bearing Zinc - 13301-03
Description
Grass Maxcess Undermount Drawer Slides For Smooth Access
Grass Maxcess undermount drawer slides deliver 7/8 extension travel, so the drawer opens far enough for easy reach while keeping the runner protected under the box. This matters when you want usable access without exposing side-mounted hardware in finished cabinetry. The soft-close function uses liquid dampening to slow the drawer in the last part of travel, which helps protect contents from impact and gives a controlled close on every use. These slides are designed as concealed runners, so they do not interrupt the cabinet interior appearance and leave the drawer sides clean for a more finished look. The slides are part of the Maxcess family with a 9 inch nominal length, which suits shorter utility, vanity, or organizer drawers that still benefit from guided motion. The assembly is built as an economical solution, supporting project budgets on multi-drawer installations without sacrificing the core soft-close and extension performance.
Key Grass Maxcess Details That Support Your Build
- The 7/8 extension design lets most of the drawer clear the opening while the slide remains protected beneath, which is useful in kitchen, bath, or shop cabinets where visible hardware is not desired.
- Liquid dampening provides the soft-close function, slowing the drawer smoothly at the end of travel, which helps reduce slamming and wear on drawer fronts and face frames over repeated cycles.
- These slides are for use with 5/8 inch (16 mm) drawer side thickness, so drawer box construction can be standardized around this material dimension for consistent fitting and drilling setups.
- Design for face frame construction means the geometry suits cabinets built with face frames, aligning with common North American cabinet methods in kitchens, baths, and built-ins.
- A patented load bearing support roller is part of the runner design, helping the slide handle the rated load more efficiently, which supports long-term running performance under typical drawer contents.
- The 75 lb dynamic load capacity rating defines how much weight the slides are tested to carry in motion, guiding their use for everyday residential or light commercial storage drawers.
Face Frame Undermount Slide Fit And Setup
These Grass Maxcess 9 inch soft-close 7/8 extension undermount drawer slides are classified as undermount drawer slides, so they locate beneath the drawer box rather than on the sides, which simplifies achieving consistent side clearances for face frame cabinetry. They are specified for 5/8 inch (16 mm) drawer side thickness, aligning drawer box material choice directly with the slide design so machining and assembly stay predictable. The configuration is called out as for face frame construction, meaning the slide and drawer relationship is intended to work with frames at the front of the cabinet, which are standard in many wood shops. Because the slide is concealed, the interior of the cabinet and drawer sides remain free of visible runners, which supports a cleaner presentation on higher-finish work.
Using Grass Maxcess Slides In Cabinet Projects
Where These 9 Inch Slides Work Best
The Grass Maxcess 9 inch soft-close 7/8 extension undermount drawer slides suit cabinet layouts where shorter drawers are needed, such as upper kitchen banks, bathroom vanities, or utility pullouts, and where 5/8 inch drawer sides are part of the build standard. The slides are described as economical, which fits production shops or multi-unit projects that require consistent function across many openings while managing hardware cost. Their rating as undermount drawer slides in the Drawer Slides & Accessories category places them within typical cabinet hardware assortments for residential and light commercial casework, so they integrate into familiar planning for drawer spacing and carcass depth. With design for face frame construction, these runners support installers building or retrofitting cabinets that rely on face frames at the front edges, a common scenario in many North American shops.
Why These Slide Details Help Installation Quality
The 7/8 extension geometry means the drawer extends most of its depth, so contents are reachable while the slide mechanism stays within the cabinet footprint, which helps reduce interference with doors or adjacent cabinets. Liquid dampening used for soft closing provides continuous smooth closing action, which can reduce callbacks related to noisy or abrupt drawer operation in finished jobs. The patented load bearing support roller distributes forces along the slide as the drawer moves, which supports the 75 lb dynamic load capacity and helps the system operate smoothly when drawers are filled with everyday items. Compliance with ANSI/BHMA 156.9, Grade 1 indicates the slides meet and exceed an industry performance standard for drawer slides, which is valuable when specifiers or shop owners require tested hardware for projects. Being sold under the Grass America brand and identified by manufacturer part number 13301-03 allows precise specification in project documents, helping purchasing and production match the same runner consistently across jobs.
Common Questions About Grass Maxcess Undermount Slides
What type of drawer slide is the Grass Maxcess 13301-03?
The Grass Maxcess 13301-03 is an undermount drawer slide with 7/8 extension and soft-close liquid dampening, which positions under the drawer while still providing access and controlled closing.
What drawer side thickness do these slides support?
The Grass Maxcess 9 inch soft-close 7/8 extension undermount drawer slides are for use with 5/8 inch (16 mm) drawer side thickness, aligning slide fit with this common material dimension.
Are these Grass Maxcess slides suitable for face frame cabinets?
The Grass Maxcess 13301-03 slides are specified for face frame construction, so their geometry is intended to work with cabinets built using a face frame at the front opening.
What load rating do the Grass Maxcess 9 inch slides carry?
The Grass Maxcess 9 inch undermount drawer slides have a 75 lb dynamic load capacity, which defines the tested moving load they are designed to handle in typical drawer applications.
How does the soft-close function operate on these slides?
The Grass Maxcess undermount slides use liquid dampening for soft-close, slowing the drawer through the final closing distance to provide continuous smooth action and reduce slamming.
What performance standard do these Grass slides meet?
The Grass Maxcess 13301-03 undermount drawer slides meet and exceed ANSI/BHMA 156.9, Grade 1, indicating they are tested to an established drawer slide performance standard.
Selecting Grass Maxcess Slides For Your Next Run
The Grass Maxcess 9 inch soft-close 7/8 extension undermount drawer slides, with 5/8 inch drawer side capability and face frame orientation, give cabinet shops a clear hardware choice for shorter drawers using standardized materials. Their 75 lb dynamic load capacity, patented load bearing support roller, and liquid dampening soft-close action combine into a runner that supports day-to-day drawer use in kitchens, baths, and built-ins. When specifying hardware for upcoming cabinet runs, these Grass America undermount slides align with projects needing concealed runners, soft-closing motion, and documented ANSI/BHMA 156.9, Grade 1 performance.
