Amerock self-close 3/8 inset hinge is a semi-concealed face frame hinge designed for applications that need a 3/8 inch inset overlay. This hinge is part of Amerock Corporation's semi-concealed hinge class, so the mounting design supports traditional face frame cabinet construction while keeping most of the hardware discreet. The hinge projects 11/16 inch, which affects door standoff from the frame and helps set consistent reveals across a run of doors. A width of 1-13/16 inch defines the leaf footprint on the cabinet, guiding layout when planning hinge spacing and edge clearances. This hinge is made of steel, giving a rigid connection between door and frame that supports dependable movement through repeated use. The burnished brass finish establishes the visual tone at the hinge line, which matters when matching existing brass hardware across doors in the same room.
This Amerock semi-concealed face frame hinge is a screw-on style, so it is designed for direct attachment to the cabinet and door using screws through the hinge leaves. As a partial wrap hinge, it is shaped to wrap around part of the face frame, which helps locate the hinge relative to the frame edge during layout. The 3/8 inch overlay inset measurement is central to fit, because it defines the relationship between door edge and cabinet opening when mounted. The 11/16 inch projection value matters when positioning doors next to each other, as it influences how hardware and door edges clear neighboring components. The 1-13/16 inch width gives installers a repeatable reference for hinge spacing from corners and between hinges on taller doors, supporting consistent alignment across multiple cabinets in the same project.
This hinge is identified as a semi-concealed face frame hinge, so it is intended for cabinets built with a face frame front rather than frameless construction. The partial wrap form allows the hinge to engage the face frame edge while leaving only part of the hardware visible when the door is closed, which suits projects that want some traditional hinge presence without a fully exposed surface-mount style. The 3/8 inch overlay inset rating targets cabinet doors designed to sit partially over the opening and partially inset, so it supports layouts that follow this common North American face frame standard. The burnished brass finish gives this hinge a warm brass appearance, which fits cabinetry schemes that specify burnished brass for pulls, knobs, and other decorative hardware, helping maintain a consistent visual line.
The steel construction of this Amerock hinge provides a robust hinge body, supporting stable movement where the door loads transfer through the leaves and knuckle over time. The self-close function is built into the hinge design, so once the door reaches the closing zone, the mechanism draws it shut to a seated position, reducing door drift and improving uniform alignment along a bank of cabinets. The defined dimensions - 11/16 inch projection and 1-13/16 inch width - give clear reference points that speed layout, because installers can base setbacks and drilling patterns on fixed values instead of trial-and-error fitting. The 3/8 inch overlay inset specification ties the hinge directly to a known cabinet door style, which simplifies replacement work when matching existing 3/8 inch inset installations that already use this geometry. The Amerock BPR7565BB part number uniquely identifies this combination of self-close function, 3/8 inch inset, burnished brass finish, and semi-concealed face frame format, which supports repeat ordering on multi-phase or follow-up jobs.
The Amerock BPR7565BB hinge is described as a semi-concealed face frame hinge, so it is suited to cabinets that use a face frame front structure rather than frameless boxes.
The 3/8 inch overlay inset defines how much the door overlays and insets relative to the opening, guiding door sizing and hinge placement for this specific cabinet door style.
The Amerock self-close feature on this hinge is designed to pull the door fully shut near the end of travel, helping doors rest consistently against the cabinet frame.
The 11/16 inch projection specifies how far the hinge extends from the mounting surface, which affects clearances between doors, walls, and interior components in a cabinet run.
The 1-13/16 inch hinge width defines the mounting footprint on the door and frame, helping installers set consistent setbacks and spacing across multiple hinges and doors.
The burnished brass finish gives the hinge a specific brass tone, allowing it to visually coordinate with other burnished brass knobs, pulls, or hardware in the same installation.
The Amerock self-close 3/8 inch inset semi-concealed face frame hinge in burnished brass combines a partial wrap form, defined projection, and a 1-13/16 inch width that together support predictable cabinet door alignment. The steel construction and self-close function help doors close to a stable, repeatable position on face frame cabinets. When a project calls for a 3/8 inch inset layout with a burnished brass appearance, the BPR7565BB hinge specification gives a clear match for both geometry and finish, streamlining selection for new work and replacements.
Sold In: 1 Pair