Amerock Self-Close 3/8" Inset Semi-Concealed Face Frame Hinge, Screw-on Polished Chrome - BPR756526

Amerock Self-Close 3/8 Inset Hinge For Face Frames

Amerock self-close 3/8 inset hinge describes a semi-concealed face frame hinge that controls the swing of an inset cabinet door, giving a predictable close that supports consistent operation on repeat installations. As a partial wrap hinge, it grips the face frame, creating a stable hinge-to-frame connection that helps doors track the same way across a full run of cabinets. The self-close function pulls the door through the last part of travel, which helps doors sit in a uniform resting position after use. The 3/8 inch inset design matches doors that overlay the frame edge by that amount, tying hinge geometry directly to common cabinet layout dimensions. A polished chrome finish presents a bright, reflective surface, which ties hinge appearance to other chrome hardware on the job. The semi-concealed style leaves only select parts visible, supporting a cleaner cabinet face while still exposing enough hinge to align with the design intent.

Key Amerock Hinge Details For Cabinet Work

• The semi-concealed face frame design places working parts mostly behind the door and frame, which helps the visible portions read as intentional hardware instead of exposed mechanism on finished installs.
• The partial wrap geometry engages around the face frame edge, adding bearing area at the frame connection and supporting repeatable alignment when setting multiple doors on the same cabinet run.
• The self-close function provides closing force near the end of travel, which helps doors return to a consistent rest position after opening, supporting a uniform reveal pattern on aligned fronts.
• The 3/8 inch inset configuration matches doors built for that specific overlay relationship, which ties hinge placement directly to standard cabinet construction dimensions used in many shops.
• The polished chrome finish delivers a reflective metallic surface, which lets the hinge visually coordinate with polished chrome pulls, knobs, and other fittings on the same project.

Face Frame Hinge Fit And Screw-On Mounting

This Amerock Corporation semi-concealed face frame hinge is identified as a screw-on style, so it fastens directly to the cabinet and door using screw mounting points rather than press-in fittings, which suits traditional woodworking workflows. As a face frame hinge, it is intended to mount to a frame front rather than a frameless cabinet side, tying its geometry to face-frame construction methods. The semi-concealed configuration positions part of the hinge within the cabinet interior while leaving a smaller portion visible on the frame and door edge, which can help line up hardware appearance with the style of other exposed components. The 3/8 inch inset designation links hinge layout to that specific door-to-frame relationship, guiding how the installer positions the leaf relative to the door edge during layout and drilling.

Using Amerock BPR756526 Hinge In Cabinet Runs

Where This Semi-Concealed Hinge Is Applied

The Amerock Self-Close 3/8 inch Inset Semi-Concealed Face Frame Hinge, Screw-on Polished Chrome - BPR756526 is intended for cabinet doors built on face frame cases, so its leaves register against the frame front and door edge in that construction style. The 3/8 inch inset geometry suits door designs that overlap the frame by that amount, tying hinge selection to that planned reveal. Being part of Amerock functional hardware, the hinge is used where both motion control and appearance matter on everyday cabinet doors. The polished chrome finish aligns with projects that already specify chrome pulls or knobs, so the exposed hinge portions follow the same finish family. Because the hinge is semi-concealed, it works in layouts where some hardware visibility is acceptable while still keeping most of the mechanism out of direct view inside the cabinet.

Why Amerock Functional Testing Matters In Use

Every Amerock functional hardware series item is tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality, so this hinge is verified against recognized benchmarks for repeated motion and surface performance. Testing beyond KCMA cycle life targets relates directly to doors that get opened and closed many times per day, supporting consistent self-close action over extended use. Strength testing beyond those requirements speaks to how the hinge performs under the loads that occur during normal door operation, supporting stable alignment when doors are moved repeatedly. Finish quality testing beyond standard requirements matters for polished chrome surfaces, because it relates to how the visible hinge areas respond to handling and normal cabinet environments. By using the Amerock BPR756526 hinge in a run of 3/8 inch inset face frame doors, the installer ties that level of tested performance to every opening, which supports consistent feel and appearance across the entire bank of cabinets.

Common Questions About Amerock 3/8 Inset Hinge

Choose This Amerock Hinge For 3/8 Inset Jobs

The Amerock Self-Close 3/8 inch Inset Semi-Concealed Face Frame Hinge, Screw-on Polished Chrome - BPR756526 pairs a 3/8 inch inset layout with a partial wrap face frame design, aligning well with traditional framed cabinet construction. Its self-close function and semi-concealed form support both consistent door alignment and a controlled level of visible hardware on finished fronts. With Amerock functional hardware testing exceeding KCMA and BHMS benchmarks for cycle life, strength, and finish quality, this hinge brings documented performance to everyday cabinet doors. For projects calling for polished chrome hardware and 3/8 inch inset face frame doors, this hinge provides a matched finish and geometry that support a coordinated cabinet run.