Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 1/2 overlay hinge describes a semi-concealed hinge that automatically pulls the door shut, which helps cabinet doors sit consistently against the face frame. This hinge is a double demountable style, so both the door and frame sides use demountable connections, allowing doors to be removed from face-frame cabinets without fully disassembling the hinge. The hinge is made from steel, giving a solid metal body that supports repeated door movement in everyday cabinet use. A burnished brass finish on the hinge presents a warm metal look that matches other burnished brass cabinet hardware on the job. The 1/2 inch overlay dimension defines how far the door overlaps the face frame, which keeps reveal lines consistent when matching other 1/2 inch overlay doors in the same run. As a semi-concealed hinge in the Amerock Corporation line, it leaves a small portion visible while most of the mechanism stays out of sight.
This Amerock Corporation semi-concealed face-frame hinge falls under demountable hinges, so it is intended for cabinet constructions that accept demountable hinge edges on the door and frame. The self-close function works with the hinge geometry to pull the door shut as it nears the closed position, which reduces door bounce and helps the door settle in the same spot each time. The 1/2 inch overlay specification ties the hinge to face-frame layouts that are built around a 1/2 inch door overlap, so doors sized for that overlay land in the correct position on the frame. With a 5/8 inch projection, the hinge establishes how far the door sits off the cabinet, which influences clearances where doors meet each other at corners. The 2-1/4 inch length and 1-1/2 inch width provide known hinge proportions, supporting repeatable hinge spacing from top and bottom edges of the door during installation work.
This hinge is categorized as a semi-concealed face-frame demountable hinge, so it is geared toward face-frame cabinet construction rather than frameless cabinet layouts. The double demountable design means it engages demountable cuts or profiles on both the door and the face frame, which allows a door to be taken off and reinstalled while leaving the base hardware location intact. The hinge functions as a self-close hinge, pulling the door closed at the end of the swing, which keeps traffic areas tidier where doors might otherwise sit ajar. The 1/2 inch overlay rating makes it suited to cabinet runs that are laid out with half-inch overlays, so replacement doors or hinge swaps in that style stay aligned with neighboring doors. The burnished brass finish gives the exposed portion of this semi-concealed hinge a warm appearance that matches burnished brass decorative hardware in the same space.
The 2-1/4 inch hinge length supplies a repeatable reference when spacing hinges from the top and bottom of cabinet doors, which helps installers keep hinge layout uniform from door to door. The 1-1/2 inch width dimension defines how much flat surface is needed on the edge of the face frame and door, which matters when working with narrow rails or stiles. A 5/8 inch projection value indicates how far the hinge offsets the door from the frame, which is important when planning clearances near adjacent cabinets, walls, or moldings. Because the hinge is made from steel, the body is built from a single metal type that handles regular door motion in everyday cabinet use. The self-close action works together with the overlay geometry to seat the door against the face frame at the same point, improving the visual line of doors along the run.
The Amerock self-close 1/2 overlay hinge is a semi-concealed face-frame demountable hinge, so it suits face-frame cabinet constructions that use demountable hinge preparations on doors and frames.
The 1/2 inch overlay on this hinge sets how far the door overlaps the face frame, so doors sized for 1/2 inch overlay align with consistent reveals across a cabinet run.
The double demountable description means both the door and face-frame sides of the hinge use demountable connections, so doors can be removed and reattached while keeping hinge locations.
The self-close function on this Amerock hinge uses its geometry to pull the door shut in the final part of travel, helping doors rest fully closed against the face frame.
The burnished brass finish provides a specific brass tone that coordinates with burnished brass pulls and knobs, so visible hinge portions match other hardware on the cabinets.
The 5/8 inch projection indicates how far the hinge and door extend from the mounting surface, guiding layout where doors swing near adjacent cabinets or walls.
The Amerock self-close 1/2 overlay hinge in burnished brass offers a steel, semi-concealed double demountable option for face-frame cabinet projects built around a 1/2 inch overlay. With defined dimensions for length, width, and 5/8 inch projection, it supplies predictable clearances and hinge layout points on doors and frames. The self-close function pulls doors against the frame, helping finished cabinets present an even line of fronts. For projects calling for burnished brass hardware and 1/2 inch overlay doors, this Amerock BPR8704BB hinge aligns the functional demountable design with the desired visual finish.