Amerock self-close 3/8 inset hinge is a semi-concealed, double demountable hinge that controls the swing of a cabinet door on a face-frame cabinet, which helps you set consistent reveals on 3/8 inch inset applications. The hinge is part of Amerock Corporation's semi-concealed hinge line, so most of the hardware stays out of sight while the working geometry still supports the door edge, which matters when you want a clean front while keeping a sturdy connection. This hinge is made from steel, giving the moving parts a solid metal interface, which matters for repeated opening and closing on frequently used cabinet doors. The self-close function built into this hinge pulls the door shut at the end of travel, which helps reduce doors resting slightly open on face-frame runs. As a double demountable design, the hinge interfaces with both the door and frame in a removable way, which is useful when doors need to be taken off for finishing or service and then put back in the same position.
This Amerock Corporation semi-concealed hinge is built for face-frame cabinets, so it works where a frame defines the front opening and the hinge mounts at that edge, which matches many traditional cabinet constructions. The 3/8 inch inset rating tells you the door overlaps the frame opening while sitting partly inside it, which matters when matching doors to an existing 3/8 inch inset reveal pattern. With a projection of 5/8 inch, the hinge sets how far the door swings out from the frame, which is useful for checking door travel past adjacent cabinets and walls. The 1-1/2 inch width and 2-1/4 inch length or diameter define the hinge plate size on the mounting surfaces, which gives a predictable footprint when you are routing, drilling, or updating from a similar Amerock pattern. Because the hinge is semi-concealed, only a portion of the satin nickel steel body remains visible on the cabinet face, which fits projects where hardware should be present but not fully exposed.
This Amerock self-close 3/8 inch inset double demountable hinge is intended for semi-concealed use on face-frame cabinetry, so it suits kitchen, bath, or built-in cabinet runs that rely on 3/8 inch inset doors. The 3/8 inch inset specification means the door edge is located partly within the frame opening, which is important when aligning new doors to an existing 3/8 inch inset layout or continuing a run that already uses that reveal. As a double demountable hinge, it connects in a removable fashion to both the frame and the door, which helps during finishing or service because doors can be taken off and later reinstalled without changing the hinge geometry. The satin nickel finish on the visible steel portions coordinates with other satin nickel cabinet hardware, which matters on semi-concealed hinges where the exposed knuckle and edge detail remain part of the finished look.
The self-close action built into this Amerock hinge pulls the door into the cabinet at the end of travel, which helps cabinet doors rest firmly against the frame, reducing small gaps that show uneven closing positions along a bank of doors. The steel construction gives the hinge arms and knuckle a rigid metal structure, which supports repeatable movement of the door leaf through thousands of open and close cycles in typical cabinet use. With a listed projection of 5/8 inch, the hinge sets the door throw off the frame so door alignment can be planned relative to adjacent doors and panels, which is useful when running multiple cabinets side by side. The 1-1/2 inch width and 2-1/4 inch length or diameter create a defined contact area on the frame and door, which helps installers position each hinge consistently from door to door. Being a semi-concealed face-frame hinge, this Amerock BPR8700G10 keeps most of the mechanism out of sight while still presenting a neat satin nickel edge, which supports projects where visual consistency and controlled door motion are both priorities.
The Amerock BPR8700G10 hinge is described as a semi-concealed face-frame demountable hinge, so it is intended for use on face-frame style cabinet constructions.
The hinge is rated for 3/8 inch inset, meaning the cabinet door sits partially inside the face-frame opening by 3/8 inch, which sets the door reveal and overlap on that frame.
The hinge is described as self-close, so its mechanism draws the door shut at the end of swing, which helps doors return to a consistent closed position on the cabinet face.
The Amerock hinge is made from steel with a satin nickel finish, so visible parts show a satin nickel appearance while the steel body provides a metal structure for the moving joint.
The hinge has a width of 1-1/2 inches, a length or diameter of 2-1/4 inches, and a projection of 5/8 inch, which together define its mounting footprint and door throw.
The hinge is specified as double demountable, so it detaches at both the door and frame connections, which helps remove and reinstall doors while maintaining hinge alignment points.
The Amerock self-close 3/8 inset hinge in satin nickel pairs a double demountable design with semi-concealed face-frame mounting, so it matches projects using 3/8 inch inset cabinet doors. With steel construction, a 5/8 inch projection, and a 1-1/2 inch by 2-1/4 inch footprint, the BPR8700G10 hinge offers defined dimensions that support layout planning and repeatable hinge placement across multiple doors. For cabinet runs calling for satin nickel hardware and 3/8 inch inset doors, this Amerock Corporation semi-concealed hinge provides the specified geometry and finish to keep your door motion and appearance consistent.
Sold In: 1 Pair