Amerock self-close 1/2 inch overlay hinge describes a semi-concealed hinge from Amerock Corporation that uses a self-closing function to pull the door shut at the end of travel, which supports consistent door positioning on face-frame cabinets. The 1/2 inch overlay detail identifies the intended door-to-frame relationship, which helps match the hinge to cabinet layouts that are built around that common overlay dimension. The double demountable design described in the product name identifies a hinge meant for demountable mounting at both door and frame, which can streamline door removal and reinstallation during finishing or service. The flat black reference in the name signals a dark, uniform appearance, which helps this semi-concealed hinge visually coordinate with flat black decorative hardware on the job.
This Amerock semi-concealed face-frame hinge is identified as a double demountable hinge, which signals a design where both the door and frame connections are set up for demountable engagement, supporting quicker disassembly when working in the field. The 1/2 inch overlay noted in the product description defines the relationship between the door edge and the cabinet face frame, which matters when laying out door sizes and hinge positions so that adjacent doors line up properly. Because the hinge is described as semi-concealed, the body sits mostly behind the door and frame while a portion remains visible, giving installers a clear view of key alignment points while leaving much of the hardware out of sight after hanging.
This Amerock semi-concealed hinge is categorized as a face-frame demountable hinge, which points to use on face-frame cabinets where the frame provides the primary mounting surface. The 1/2 inch overlay reference establishes it as a fit for doors laid out to cover the face frame by that dimension, which matches many standard kitchen and bath cabinet designs. Its double demountable designation in the product name highlights a hinge concept where both door and frame sides are configured for demountable attachment, which helps during cabinet refacing, refinishing, or service work when doors need to come off and go back on repeatedly. The hinge is also listed as part of Amerock functional hardware, so it sits within Amerock Corporation's broader cabinet hardware system used by woodworking professionals.
The self-close function described in the web description is tested by Amerock under conditions exceeding KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality, which supports long-term door performance in typical cabinet use where doors are cycled repeatedly. Testing beyond those KCMA and BHMS benchmarks indicates the hinge is evaluated for durability, which matters when a project demands hardware that continues to self-close and hold alignment over many open-and-close cycles. Because the finish quality is part of that testing, the flat black appearance referenced in the product name is assessed for its ability to hold up under use, supporting a consistent look on visible hinge portions. Together, the self-close feature, the 1/2 inch overlay specification, and the double demountable style create a hinge setup that supports predictable door position, straightforward service, and coordinated flat black hardware across multiple cabinet openings.
The Amerock BPR8704FB hinge is described as a semi-concealed face-frame demountable hinge, so it is intended for use on face-frame cabinet constructions where the frame serves as the hinge mounting surface.
The 1/2 inch overlay specification means the door is sized to cover the face frame by 1/2 inch, which helps align door sizing and spacing across multiple openings using this hinge style.
The double demountable description indicates a demountable style at both door and frame, which allows doors to be removed and reinstalled more easily during finishing, adjustment, or later service.
The self-close function on this Amerock hinge pulls the door shut at the end of swing, which helps doors rest against the frame consistently and reduces partially open door positions in daily use.
The Amerock functional hardware series, including this hinge, is tested in conditions exceeding KCMA and BHMS standards, supporting durability for cycle life, strength, and finish quality on cabinet installations.
The flat black designation in the product name identifies a flat black look on visible hinge portions, which lets installers coordinate it with flat black pulls and knobs on the same project.
The Amerock BPR8704FB hinge combines a self-close function with a 1/2 inch overlay, double demountable configuration, and semi-concealed layout, giving installers a functional option for face-frame cabinets. Its flat black appearance matches projects built around that finish, tying the hinge into broader hardware selections. Tested performance beyond KCMA and BHMS standards supports long-term operation on frequently used doors. For cabinet work set up around 1/2 inch overlay face frames and flat black hardware, this Amerock hinge offers a clearly defined specification set for planning both layout and long-term function.
Sold In: 1 Pair