Berenson-R.Christensen Fuji 8-13/16" (224 mm) Center to Center Polished Chrome Pull, 1189-1026-C

Fuji Pull 224mm Center To Center Use

Fuji pull 224mm center to center describes an R. Christensen by Berenson cabinet pull from the Fuji Collection that is built around an 8-13/16 inch center-to-center drill size, so it targets common cabinet hole spacing in a straightforward way. The zinc material forms the body of the pull, which supports a solid-feeling grip while keeping cabinet hardware consistent with other zinc-based components on a project. A polished chrome finish defines the surface, giving cabinets a bright, reflective look that aligns visually with other polished chrome decorative hardware in the same run. The overall length of 12-1/2 inches stretches this pull across a wider drawer or tall door, so it spans more of the face and offers a generous hand space. A width of 1-1/4 inches provides a substantial front profile, creating comfortable contact for repeated opening and closing.

Key Fuji Cabinet Pull Details For Projects

• The 8-13/16 inch (224 mm) center-to-center dimension sets the drilling layout, helping installers line up handle locations across doors and drawers.
• The 12-1/2 inch overall length defines the visual span on the cabinet face, which is useful when planning proportion across multiple fronts.
• A projection of 13/16 inch positions the gripping surface off the door, leaving working finger clearance between pull and cabinet face.
• The 1-1/4 inch width creates a broader contact surface, which can feel more secure under load when operating larger drawers or doors.
• The polished chrome finish coordinates with other polished chrome decorative elements, helping maintain a unified appearance across hardware runs.
• The zinc material forms the core structure, supporting a stable, consistent feel on every pull in the Fuji series.

Mounting And Fit Details For This Fuji Pull

This Fuji series pull uses an 8-13/16 inch center-to-center measurement, so existing holes on cabinets drilled to 224 mm spacing align directly with the pull posts. The 12-1/2 inch overall length means the ends extend beyond the mounting points, which affects how far the pull reaches across drawer or door fronts during layout work. A projection of 13/16 inch sets the stand-off from the face, helping installers visualize clearance in front of doors and drawer fronts when doors are adjacent. The 1-1/4 inch width influences how much flat surface the hand meets, which matters when assigning this pull to heavier fronts that see frequent use. The specified 8-32 x 1 inch screw size defines the threaded interface, matching the standard pull mounting pattern used on many cabinet projects.

Using The R. Christensen Fuji Pull On Cabinets

Where This Fuji Series Pull Is Typically Used

The R. Christensen by Berenson Fuji Series cabinet pull is part of the Decorative Hardware & Moldings Handles and Pulls class, so it is suited to cabinet doors and drawers that call for a handle-style pull. An 8-13/16 inch center-to-center size positions it in the longer pull category, which fits well on wide drawers or taller doors where additional hand space is helpful. The polished chrome finish works on projects that already use polished chrome decorative hardware, so hardware lines stay visually consistent from cabinet to cabinet. With a 12-1/2 inch length and 1-1/4 inch width, the pull offers a substantial presence, making it appropriate for installations where the pull is a visible design element as well as a working handle.

Details That Support Consistent Cabinet Install Results

The 224 mm center-to-center measurement on this Fuji pull standardizes drilling across a run of cabinets, which streamlines layout and repetition on multi-unit projects. A projection of 13/16 inch defines the working gap behind the pull, giving predictable finger clearance once the hardware is mounted. The 1-1/4 inch width and extended 12-1/2 inch length combine to spread the gripping area, distributing user force along the handle when operating larger or heavier cabinet fronts. Zinc construction forms a uniform base for the polished chrome finish, so each pull aligns in appearance and feel with others in the same Fuji series. The identified 8-32 x 1 inch screw size aligns with common cabinet pull threading, which supports straightforward fastening through standard cabinet door and drawer thicknesses.

Common Questions About Fuji 224mm Cabinet Pulls

Selecting This Fuji Pull For Your Next Cabinet Run

The R. Christensen by Berenson Fuji pull with 224 mm (8-13/16 inch) center-to-center spacing, 12-1/2 inch overall length, and 13/16 inch projection brings a long-format option to cabinet hardware layouts. Its zinc construction and polished chrome finish align with other polished chrome decorative pieces in a project, helping maintain a cohesive hardware line. When a run of cabinets calls for a substantial pull with clearly defined dimensions, this Fuji Series 1189-1026-C model gives installers and fabricators a precise, repeatable hardware choice.