Berenson-R.Christensen Fuji 6-5/16" (160 mm) Center to Center Polished Chrome Pull, 1191-1026-C

Fuji Pull 160mm Center To Center For Cabinets

Fuji pull 160mm center to center describes a cabinet pull with a 6-5/16 inch center-to-center drilling, which sets hole spacing so new or replacement installs line up cleanly on cabinet doors and drawers. The overall 9 inch length defines the visual footprint across the face, helping lay out multiple pulls in a straight, consistent run. A 1-1/4 inch width gives a substantial gripping surface, which supports confident opening on heavier fronts. The 13/16 inch projection sets how far the pull stands off the door, creating finger clearance while keeping a low profile that stays close to the cabinet. The polished chrome finish gives a bright, reflective surface that coordinates with other chrome hardware. Zinc construction provides a solid metal body, giving a firm feel in the hand on every pull. The Fuji series design groups this pull with the broader Fuji collection for visually consistent layouts.

Key Fuji Polished Chrome Pull Details

• The 6-5/16 inch (160 mm) center-to-center dimension fixes hole spacing, allowing consistent drilling patterns across doors and drawers for a uniform hardware layout on cabinetry runs.
• The 9 inch length defines the full bar size, which helps with proportion decisions on wider drawers or tall doors where visual balance and hand clearance matter.
• The 13/16 inch projection sets the standoff from the cabinet face, giving space for fingers to hook behind while keeping the pull close enough to reduce snag potential in tight walkways.
• The 1-1/4 inch width provides a wider gripping area, supporting a secure handhold when pulling heavier or loaded drawers in kitchens, baths, or storage cabinets.
• The polished chrome finish creates a reflective surface that coordinates with other chrome components, supporting clean visual alignment across hinges, faucets, and other visible metal parts.
• The zinc material construction forms the body of the pull, giving a metal feel that supports everyday operation on frequently used cabinet openings.

Installation Fit For Fuji 6-5/16 Inch Pull

The 6-5/16 inch center-to-center drilling dimension sets the exact distance between mounting holes, simplifying layout when marking new doors or matching existing holes during hardware changeouts. This fixed spacing helps installers transfer measurements from one front to the next, keeping hardware rows straight across upper and lower runs. The 9 inch overall length offers clear ends for aligning with layout lines, aiding in quick visual checks before tightening fasteners. With 13/16 inch projection, the pull sits at a controlled distance off the face, which helps cabinets open without knuckles hitting the door or drawer edge. The 1-1/4 inch width supports stable contact with the front surface, contributing to a solid feel when the pull is secured.

Using The R. Christensen Fuji Series Pull

Where This Fuji Polished Chrome Pull Fits Best

The Fuji series pull from R. Christensen by Berenson is part of the decorative handles and pulls category, aligning it with cabinet and furniture hardware applications. The 6-5/16 inch center-to-center spacing suits medium to larger cabinet doors or drawers, giving enough span for a full-hand grip across the bar. Its 9 inch length makes it appropriate for wider drawer fronts where proportional hardware supports both access and appearance. The polished chrome finish visually fits projects that use chrome faucets, hinges, or other bright metal details, allowing the pull to tie the hardware look together. Zinc material construction provides a metal pull body that suits everyday cabinet use in residential or light commercial woodworking projects.

Details That Support Consistent Cabinet Results

The 6-5/16 inch center-to-center measurement on the 1191-1026-C Fuji pull allows templates or jigs set to that spacing to be reused from cabinet to cabinet, speeding repetitive installations. The 13/16 inch projection defines how far the hand moves away from the door surface, which helps provide clearance when fronts are slightly proud of surrounding panels. A 1-1/4 inch width spreads the contact area where the pull meets the door, helping it seat firmly when tightened against the surface. The polished chrome finish offers a consistent reflective appearance along a run of pulls, so multiple units align visually on large banks of cabinets. As part of the Fuji collection identified in the product description, this pull can be matched with other Fuji pieces to maintain the same design language throughout a project.

Common Questions About The Fuji 160mm Pull

Selecting This Fuji Pull For Your Project

The Berenson-R. Christensen Fuji Series 6-5/16 inch center-to-center polished chrome pull combines a 160 mm drilling pattern, 9 inch overall length, 13/16 inch projection, and 1-1/4 inch width to support consistent cabinet layouts. Zinc construction and polished chrome finish define both feel and appearance. For projects needing a Fuji collection pull with these exact dimensions and finish, this 1191-1026-C model from Wurth Baer Supply delivers a defined fit and look for cabinet doors and drawers.