R. Christensen by Berenson Fuji Pull 6-5/16" (160 mm) Center to Center, Brushed Nickel, 1190-1BPN-C

Fuji Pull 160mm Center To Center For Cabinets

Fuji pull 160mm center to center describes a cabinet and drawer pull from the Fuji Collection that uses a 6-5/16 inch (160 mm) center to center dimension, so installers can match it to drilling patterns laid out on cabinetry or casework. The pull is part of the Fuji Collection from R. Christensen by Berenson, which groups it with coordinating decorative hardware for consistent styling across a project. Its overall length of 9 inches spans wider drawer fronts or doors, helping distribute hand contact across more surface area. A projection of 13/16 inch sets the gripping surface off the face of the cabinet, creating clearance for fingers during daily use. The 1-1/4 inch width gives the pull a solid feel against the door or drawer front, which matters when aligning it visually with modern cabinet lines.

Key Fuji Brushed Nickel Pull Job Advantages

• The brushed nickel finish on this pull presents a muted metal surface that helps cabinet faces read cleanly in finished installations, which supports a contemporary look on kitchen or bath projects.
• The pull is made from zinc, giving a metal construction that supports a firm handhold on cabinet doors or drawers during opening and closing in regular use.
• A center to center measurement of 6-5/16 inches (160 mm) matches a common drilling spread, which simplifies layout when aligning multiple pulls in a straight run on doors or drawer banks.
• The 9 inch overall length provides visual coverage across medium to wider fronts, giving installers an easy reference for centering the pull on panels or drawer faces.
• The 13/16 inch projection sets the front of the pull out from the cabinet surface, which creates working space for fingers between the hardware and the door or drawer face.

Installation Details For This 6-5/16 Inch Pull

This pull uses a 6-5/16 inch (160 mm) center to center dimension, so drilling two holes at that spacing aligns the mounting points for proper fit. The specified screw size is 8-32 x 1 inch, which ties the pull to a standard machine screw thread and length typically used in cabinet door and drawer front installations. Its 13/16 inch projection works with that mounting approach to stand the bar off the surface at a consistent distance, supporting a uniform look across a row of cabinets. The 1-1/4 inch width sets the footprint on the face of the cabinet, giving a predictable edge distance when measuring from door or drawer edges.

Using The Fuji Brushed Nickel Pull In Projects

Where This Fuji Cabinet Pull Fits Best

The Fuji pull from R. Christensen by Berenson sits within the Fuji Collection, which positions it as decorative hardware for cabinets and similar casework. Its brushed nickel finish works on projects where a soft metal tone is preferred, such as kitchens or built-ins that coordinate with brushed fixtures. The 6-5/16 inch (160 mm) center to center size places it in a category often selected for medium to large cabinet doors or wide drawers, so it can span a good portion of the front. With an overall 9 inch length, the pull reads as a substantial element on the face, which matters on taller pantry doors or longer drawer fronts where proportion is important. The zinc material provides a metal body suited to repeated opening and closing of doors and drawers in residential or light commercial cabinetry.

Why These Fuji Pull Details Support Consistent Results

The defined 6-5/16 inch (160 mm) center to center spacing lets installers repeat the same drilling template across multiple cabinets, helping maintain alignment across a whole run. Having the overall length listed at 9 inches allows accurate centering on panels by measuring equal distance to each side, which supports straight visual lines on drawer banks. The 13/16 inch projection gives a fixed stand-off that, when repeated, keeps all pulls projecting the same distance from door and drawer faces in a kitchen or bath. With a width of 1-1/4 inches, the pull establishes a consistent bearing surface against the wood, which helps layouts look even when matching rails or stiles. The combination of zinc construction and brushed nickel finish brings together a metal substrate and surface treatment that tie into other decorative hardware pieces from the same source. The manufacturer part number 1190-1BPN-C identifies this exact configuration, which matters when matching hardware across multiple orders or phases of a project.

Common Questions About The Fuji 160mm Pull

Select This Fuji Pull For Sized Cabinet Runs

The Fuji Series 6-5/16 inch (160 mm) center to center brushed nickel pull from R. Christensen by Berenson provides defined dimensions, a zinc body, and a brushed nickel finish that suit cabinet and drawer projects. With its 9 inch overall length, 13/16 inch projection, and 1-1/4 inch width, the pull offers clear sizing for laying out consistent hardware lines. For projects needing a decorative cabinet pull with a 160 mm center to center pattern and brushed nickel appearance, this Fuji option aligns hardware spacing and visual proportion across multiple fronts.