PVC edgebanding black 1mm gives a finished PVC edge to panels using a 1-5/16 inch wide strip on a continuous roll, so you can cover long cabinet or furniture runs with consistent material from the same batch.
This Doellken Woodtape edge banding is specified at 1mm thick, which creates a substantial edge profile that matches many laminate-based casework details and helps maintain a uniform look around doors, drawer fronts, and exposed ends.
The 1-5/16 inch width fits work where faces or substrates call for that coverage, so the banding can span the panel edge and any minor overhang before trimming for a clean, even line.
The roll length is 300 feet, giving shops a single run of color 2416 Black for multiple parts on the same job or across smaller jobs, which supports visual continuity when using the same black finish throughout a project.
This product is identified by manufacturer part number 2416-2140-1, which ties it directly to Doellken Woodtape and helps match previous orders or coordinate with project documentation that specifies this exact edge banding.
The stated 1-5/16 inch width gives fabricators a defined banding size that covers common panel thicknesses with trim allowance, which is useful when setting up edgebanders or hand application routines for repeat work.
The 1mm thickness works with construction details that call for a heavier PVC edge, so the finished edge can visually align with similar 1mm edges already in a shop standard or on an existing installation.
A 300 foot roll length reduces changeovers during production runs, since many cabinet parts and shelves for a project can be fed from the same roll while maintaining the same color 2416 Black along every exposed edge.
Identifying the product as PVC Edgebanding, Color 2416 Black, 1mm Thick 1-5/16 inch x 300 foot Roll gives estimators and programmers a concise spec that matches the way this banding is likely to be called out on cutlists.
This Doellken Woodtape PVC edgebanding is categorized under Edgebanding & Surfacing and Edge Banding, placing it directly in the workflow for finishing edges on laminated or TFL-based components such as cabinet sides, doors, and shelving.
The color 2416 Black is referenced as a good match to multiple surface brands, including American Laminates Black and Arauco Prism BLK100 Black Suede, which helps when a shop works with more than one board supplier but wants a single black edge solution.
Good match notes for Funder 107 Black Suede, KML KMAU002 Black Classic, and Laminova ALL-0002 Negro show that the same PVC edge banding can visually coordinate with different black designs, supporting mixed-material projects while maintaining consistent edges.
Listings for Lamitech 2110 Cinder, Nevamar S6001 Black Textured, Nevamar S6053 Jett Black Textured, and Panolam S405 Black Satin as good matches give commercial and institutional projects using those surfaces a clear way to align face and edge colors.
References to Pionite SE101 Black Suede, Pluswood 90S Black, Roseburg Duramine 006 Black Suede, and StevensWood 174 Black Rain Softex indicate that the same 2416 Black banding can support a broad palette of black decorative surfaces while keeping edge inventory simple.
Additional good match notes for SuperLam Black, Tafisa L203 Black Crystalite, Thermo Pressed TFL-001 Black, Timber Products Black, and Roucke Black or close show that this 1mm edge banding can follow black designs across many product lines in a shop.
The alignment with Wilsonart 1595 Black Matte as a good match means projects using that laminate can carry a consistent visual story from horizontal and vertical faces to all exposed edges, which supports clean lines in finished millwork.
Good match status for Formica 909 Black Matte and Panolam S405 Black Satin allows fabricators to specify one PVC edge banding for different matte or satin black finishes, reducing color juggling while still supporting varied design calls.
Close match notes for Decore-Ative Black Oak and Roucke Black give designers some flexibility when wood-look or specialty blacks are involved, since the 2416 Black banding can still read in the same overall color family in those applications.
Good match to BauschLinnemann 48261 Black and BauschLinnemann 66966 Black Stipple shows that the banding can visually sit beside stippled or textured black surfaces, which is useful when casework mixes smooth and textured components.
References to Uniboard 631 Classic Black Dolomite and Uniboard 888 Nova Black Dolomite as good matches allow projects built on those TFL cores to finish every edge with the same black tone, supporting uniform reveals around doors and drawer fronts.
With the manufacturer part number 2416-2140-1 clearly defined, purchasing and production teams can call out this exact 1-5/16 inch, 1mm thick, 300 foot black PVC edgebanding in project specifications and reorders, helping align material selection from design through fabrication.
The edgebanding is 1-5/16 inch wide and 1mm thick on a 300 foot roll, so it suits builds that call for that coverage and a heavier PVC edge profile across multiple parts.
The product uses color 2416 Black, which is documented as a good match to many black laminates and TFL designs, helping edges visually align with those specified surface materials.
The edgebanding lists good color matches to surfaces such as American Laminates Black, Arauco Prism BLK100 Black Suede, Formica 909 Black Matte, and Wilsonart 1595 Black Matte for coordinated edge work.
The color 2416 Black is noted as a good match for Uniboard 631 Classic Black Dolomite and Uniboard 888 Nova Black Dolomite, supporting consistent edges on projects using those TFL designs.
This edge banding is identified by manufacturer part number 2416-2140-1, which ties directly to the Doellken Woodtape 1-5/16 inch x 1mm x 300 foot 2416 Black product.
The 300 foot roll length lets shops edge multiple cabinets or casework components from the same color 2416 Black run, supporting consistent appearance across an entire project.
The PVC edge banding defined as Color 2416 Black, 1mm Thick 1-5/16 inch x 300 foot Roll from Doellken Woodtape combines a specific size with a black tone referenced as a good match to many laminate and TFL designs.
Using the documented part number 2416-2140-1 and the listed color match references, projects can align this edge banding with chosen American Laminates, Wilsonart, Formica, Arauco Prism, Uniboard, and other black surfaces for coordinated casework.
For work that relies on a single black edge solution across different board brands, this 1mm PVC edgebanding gives a defined dimension, color reference, and roll length that support consistent results from design through fabrication.